Your camaro looks really mean with that extractor hood on that made it look super clean! Two thumbs 👍 up
@charliegilbert7409
4 жыл бұрын
I just did mine!! You video gave me the confidence to pull it off. However I did notice on mine...the middle of the extractor to the windshield it pulled the hood. So now its a little dimpled in on both sides. Didnt matter if the nuts were snug or backed off.
@hobcal06
6 жыл бұрын
Nice job! your video gives me confidence to try my own extractor install
@sergneo
6 жыл бұрын
hobcal06 Thank you very much!! You can do it, just take your time and double check your line ups. Take the hood off for sure lol.. I almost left mine on.... glad I didn't..!! I would like to know how it turns out for you !!
@rickygray7767
5 жыл бұрын
Job well done, it looks great 👍
@geraldingram3834
3 жыл бұрын
Looks fantastic.
@jrjr6840
5 жыл бұрын
Hi there can u help me Out I bought hood Extract but I don’t have the template I don’t know how to find the center of the home that way I can install do you have any dimensions
@krolis61
7 жыл бұрын
NIce Fixin to do mine tomorrow
@krolis61
6 жыл бұрын
to cut thru it all, take guard of grinder and use a 6" cutting disk
@khaledelajam3043
7 жыл бұрын
Is that a GM extractor ? what about the drip tray. Recommendations on where purchased with the template for the install ? Thanks,
@sergneo
7 жыл бұрын
No Khaled, it is not from GM, the extractor is from ACSComposites.com, the template comes with the extractor! It does a wonderful job at the engine compartment cooler and preventing pressure from building up under the hood at higher speeds.
@khaledelajam3043
7 жыл бұрын
Yes. I found the website earlier. I will be ordering my kit from there . That is actually a GM extractor, but the pan is made by ACS. That's according to their website. Great video BTW!
@sergneo
7 жыл бұрын
Khaled Elajam Thank you! And you've done more research than I did. It seem to me that this was a product developed by ACS that was a clone of the GM extractor. I hope the installation process goes well for you, take your time and triple check yourself at any point you're not totally sure about any step. The instructions are very good and the more I look at my extractor the more I see how well and even the installation turned out..!!
@sergneo
7 жыл бұрын
Thank You!!
@harrisboy1981
7 жыл бұрын
good job👍
@rolltide1262
7 жыл бұрын
Looks damn good! Will you be painting it to protect it from the elements
@sergneo
7 жыл бұрын
No, it already comes with a durable finish just like the extractors that are built into the hood from the factory. From what I understand the extractor is actually from General Motors. It does a really good job letting the heat out!!
@rolltide1262
7 жыл бұрын
Excellent, looks great and fine work mate!
@sergneo
7 жыл бұрын
Thanks Mate..!!
@TheEazye580
7 жыл бұрын
How did u know where to put the scope in middle ??
@sergneo
7 жыл бұрын
Eazye580 It comes with a templet that you lay out over the hood, then you line it up and use painters tape to secure it into place.
@sergneo
7 жыл бұрын
When the template is laid out onto the hood it takes care of all that. I ran my hands over the grooves in the hood to make sure the template was lined up evenly. The template covers the entire hood, just make sure it is taped into place with painters tape. The template was very accurate with the curves in the hood, once you get it into place everything will be lined for you without much guesswork.
@TheEazye580
7 жыл бұрын
Bro I don't have the template how did u get it
@sergneo
7 жыл бұрын
Eazye580 Yes Sir, you can order the kit from ACSComposites.com
@TheEazye580
7 жыл бұрын
I wonder where I can just get the template because I bought both parts from gm
@mikescott5340
6 жыл бұрын
Wat size rims are those
@sergneo
6 жыл бұрын
Thank you for asking Mr. Scott, Front and back are 22 inches!
@johncrankshaft2886
4 жыл бұрын
Awesome job but i think GM designed this as an aesthetic piece rather than functional, i was planning to get one to help extract heat from my long tubes but i think i will just get the track spec one instead. Great job though
Пікірлер: 30