Put up a Patreon mate. You have given me a wealth of knowledge that would have cost me a lot!!!
@GregsGarage
Жыл бұрын
I always like hearing your insight and experience.
@VWJawbreaker
Жыл бұрын
Always appreciate your input and thoughts on many different aspects. Project Farm channel has some great experiments. I’ve had the best luck with Yamabond for the case halves vs anything else that I’ve tried. Would be cool if a bunch of us showed up in VW’s for a drag and drive event 😂
@rdwit659
10 ай бұрын
Thank you for sharing your knowledge!
@davidwhocares3293
Жыл бұрын
Thank you soooo much for sharing all of your killer knowledge Darrin! I have learned so much from your channel over the years !
@nobusdave5296
Жыл бұрын
I'm not an engine builder but you have opened my eyes to a few things Thanks and PeAcE
@randallhub528
Жыл бұрын
Thankyou for the tips Darrin...I've got a motor on the stand with a new lunati cam..gonna dump the oil got the Lucas break in oil on order from Amazon! Retired in Cali.I ain't leaving.
@nobusdave5296
Жыл бұрын
Thanks for the great videos PeAcE ✌
@MrGarcon98
Жыл бұрын
extremely interesting video to say the least big thanks ,,,, denis
@terryprevatt
Жыл бұрын
Nice progress. Thanks for the information Darrin!
@natevolkschevy2955
Жыл бұрын
Happy Thanksgiving Darren
@trevcessna1723
Жыл бұрын
Hey Darin why no mention of the old standard Gasgacinch? This is recommended in the Tom Wilson How to rebuild your Volkswagen air cooled engine? Great video, thanks!
@DailyPatinaBeetle
Жыл бұрын
Very informative👍🏽
@vintage76vipergreenBeetle
Жыл бұрын
Great information. 👍
@robertrichards6459
Жыл бұрын
You're a genius thank you
@gregvan5057
Жыл бұрын
Great video mopar sealant has been a win for me with the mickey mouse stuff I do.
@jasonburkhart1632
Жыл бұрын
Really appreciate the engine videos. Just wondering if I should install single springs for break in. Got cb panchitos heads with dual springs
@jarrodmullins2988
Жыл бұрын
What part of Florida are you located
@chriswhitehead3660
Жыл бұрын
What would it take to build the 78/94 I believe with the AA Pistons and heads I love the way it sounded when you fired it up. Do you have one available for sale?
@jimmywilkinson9190
Жыл бұрын
about the revving the motor to break it in ? How does that apply to a VW the cam is under the crank , it's gonna get oil splash from the crank bleed out . The best oil I used back in the 80s was Exxon Superflow 20-50 . + it was super cheap at Autoshack
@smokepeddler
6 ай бұрын
Yamabond or most motorcycle case sealer is the way to go.
@vayabroder729
Жыл бұрын
Many years ago we used Curil K-2 sealer for the case halves; it was made in Germany back then (1980’s).
@dannoyes4493
Жыл бұрын
Where do you get the ball-bearing lifter? I'd like to try some in a Type4... Thanks.
@sniper84734
Жыл бұрын
Darren I have been watching your videos for some time I have a few questions for you can I put high rev, single spring be OK for break in.
@Mtbeaver9
3 ай бұрын
What do you seal the cylinder studs in the case with? I got a new case and have to install studs in the case savers and they look like they could leak buy the cylinders. Any info would be appreciated. Your the man with the plan. Thank you for your time and all the videos you make.
@vwdarrin
3 ай бұрын
Yambond work good on the studs, it is very hard to clean up, they make two types , the one that stays pliable is good for the case halfs, you need the that gets hard for the studs,
@Mtbeaver9
3 ай бұрын
Thank you for your help and time.
@SBCK5
Жыл бұрын
Nice job buddy! It would he cool if you could make a drag drive event! Get more views and make a burn out car for Cletis‘s channel
@jonporter363
Жыл бұрын
I've heard you talk about wanting more oil on the valve train. I came across a theory about doing the hoover mod and also grinding a notch into the side of the rocker arm pointing toward the top of the valve to squirt oil on the valve train. have you heard of this? Any experience with it? Also what are your thoughts on the hoover mod in general?
@orbitaljellyfish808
Жыл бұрын
Ball point lifter 🤯🤯🤯🤯🤯🤯🤯 Nevermind the bullocks!!!
@1fastbuggy502
Жыл бұрын
Where do you buy your Yamabound Darrin? E bay in Canada want 30 plus and 40 plus for shipping.
@chrisfreemesser5707
Жыл бұрын
Really informative video Darrin...thanks for sharing your knowledge with us! Stupid noob question...if you're not putting break-in lube on the bearing surfaces of the cam, is there any benefit to maybe putting engine oil on the bearing surfaces so there's at least a little lubrication on them when the engine first starts up?
@VWJawbreaker
Жыл бұрын
You’d want to put oil or assembly lube on all bearing surfaces to prevent metal on metal when rotating the engine during assembly and prevent a dry start up. Cam and lifter break in lube is different than assembly lube.
@Steve-ff7xj
Жыл бұрын
I have a set of pop out windows how would you contact if your interested
@mamabragg
Жыл бұрын
Why all the slamming?
@stevepimentel1225
Жыл бұрын
Enjoy yourself
@khamul02
Жыл бұрын
Does anyone know how to get in touch with Darrin?
@vwdarrin
Жыл бұрын
you can email me Andrea.... andreab@thegourmetchocolatier.com
Пікірлер: 38