Mr. Barbour, Sir --- as always your attention to detail, your efforts at presenting a concise and clear block of information, and your calming tone of delivery, have been greatly appreciated over here in California! Thanks!
@BarboursAutoHelp
8 ай бұрын
Thanks for the compliment! Good luck to you.
@jasonjeffers3929
2 ай бұрын
Hay can you help me with my 2014 Ford focus. I have checked all relays fuses and alt is good and Starter is good. Saying starting system fault.@@BarboursAutoHelp
@bigrustytrusty5856
Жыл бұрын
Is intake and exhaust sensors the same part?
@Umbaharo
6 ай бұрын
I changed my valve cover and the exhaust side hole for the cam position sensor has an inward taper at the top of the hole. So my cam sensor cannot sit flush like the front. Is there another sensor I can use?
@yousifsalahaddin2908
Жыл бұрын
Thank you for your video and explain
@ROYALRAIN-jq4mm
Ай бұрын
Thank you
@BarboursAutoHelp
Ай бұрын
You're welcome
@TennesseeHomesteadUSA
2 ай бұрын
Same on 2012 Escape ?
@tonyuresti4463
Жыл бұрын
Would this be the same set up as the 1.0? , Where would I find bank B for the camshaft position sensor ?
@neej2623
Жыл бұрын
My. Ford Focus had some work done such as the harmonic balancer and a crankshaft pully however once those were replaced my engine light came on and I got a code saying it’s the camshaft sensor, that was also replaced, and the error is still occurring. Will there ever be a fix for this? Idk if the shop may have caused this
@BarboursAutoHelp
Жыл бұрын
What is the code exactly? And what is it’s definition?
@MnRXotics
Жыл бұрын
Yo same bro
@MnRXotics
Жыл бұрын
BarboursAutoHelp me personally have had the same exact experience as this guy I have a code p052A ,P0103,P0113,P0131
@maddog9793
10 ай бұрын
@@BarboursAutoHelpI'm having something similar, I replaced the valve cover gasket so, after everything was put back together, all of a sudden I got the check engine light on so, I scanned it and it's giving me code P0013 ( B Camshaft position actuator A control circuit/Open bank 1). Would that be the selenoid or the chamshaft sensor??
@dantheman826
Жыл бұрын
I was wondering if you can help me. I have code PO333, PO68A, P068B. I jumped my battery for the past 3 days due to it dieing overnight because I let the access port in overnight. The car now shuts off while driving. Any help would be appreciated
@visalee1734
Жыл бұрын
Code on mine from AutoZone says P0339. 2018 Ford Focus. CPS A Circuit Intermittent
@tiagosantosdearaujo2336
Жыл бұрын
I am having codes P0320, P0344, P0369, P061C, and P1336. Have replaced both camshaft and crankshaft sensors but still get the fault codes and the car won't start. Do you have any tips? I'm almost giving up on this car.
@alecchamberlain4231
11 ай бұрын
Did you ever get it figured out? The only code I don’t have that you do is p1336
@Scot-land
Жыл бұрын
Does anyone know if it can be found in roughly the same place on a 2009 MK2 ford ka 1.2 zetec
@ll_lvl1224
Жыл бұрын
Do you have the link to the parts?
@wegiel1987
Жыл бұрын
so which one is more importent and cuz misfire?
@BarboursAutoHelp
Жыл бұрын
Come again?
@wegiel1987
Жыл бұрын
@@BarboursAutoHelp which camshaft sensor is more importnat
@BarboursAutoHelp
Жыл бұрын
Both
@JEE7600
Жыл бұрын
@@BarboursAutoHelp I have a 2016 Ford Focus SE and has the following codes P0300 - Random Misfire P0301 - Cylinder 1 Misfire Detected P0304 - Cylinder 4 Misfire Detected P0316 - Misfire Detected on Startup (First 1000 Revolutions) I've replaced the spark plugs and swapped Coils 2 and 3 with 1 and 4 and they came back I'm thinking it might be these Camshaft Position sensors based on some research. Do you have the part numbers?
@wegiel1987
Жыл бұрын
@@JEE7600 have same iisue with my focus mk3 ST if you fine the solution pls share with it. In my case it wasnt the camshaft sensors.
@franciscosanchez6583
Жыл бұрын
How to replace Map sensor
@BarboursAutoHelp
Жыл бұрын
This vehicle is not equipped with a MAP sensor. It has a MAF sensor.
@vids2290
Жыл бұрын
Replaced both sensors. Code came right back and power loss persists
@BarboursAutoHelp
Жыл бұрын
Do you have diagnostic trouble codes?
@vids2290
Жыл бұрын
@@BarboursAutoHelp yes. Cam position sensor.
@vids2290
Жыл бұрын
@@BarboursAutoHelp yes.camshaft position sensor.
@BarboursAutoHelp
Жыл бұрын
@@vids2290 What are the code numbers... PXXXX? Was any work performed recently other than replacing the sensors?
@vids2290
Жыл бұрын
@@BarboursAutoHelp p0340. No work done in 57k miles other than oil changes, front brakes last year.
Пікірлер: 41