Excellent video sir! I subscribed once I had the chance to watch a bit of it, and then realized we were in the same group during the diagnostic challenge at Vision this year. That was an awesome event! Look forward to watching more of your videos, keep up the great work!
@siuautomotive
3 жыл бұрын
Ha! What a small world. Thanks for the compliments on the video. Yeah, I was impressed with Vision. I didn't have high expectations with the virtual format, but they did great. That diagnostic challenge was pretty cool too. As you might notice, I do a lot of transmission videos, but I do dabble in engine performance diagnostics as well.
@robertmccully2792
Жыл бұрын
Its not the price of the tool, its the knowledge to use and understand it.
@cunningmouse8064
4 жыл бұрын
whyyyyy such a brilliant video has not yet hit 1M views??? Author - Well done!!! Thanks a lot
@abrienel6558
8 ай бұрын
Someone who knows what they are doing! What a pleasure to see.
@maksym3d
3 жыл бұрын
Thank you for the great primer on automotive scoping! Just like other commenters, I think I might need to watch it a few times to pick on various bits and pieces of wisdom. I think it would be also useful if you could possibly make another video on various probes and cables used in this demo (or maybe post them as a list on this video's description), as well as on how you've hooked all of them up to the car.
@weldingjunkie
4 жыл бұрын
Greet video it was nice to see this. I have the maxiscope, Zeus , uScope & pico 4425 the one thing about these vs the pico 2204 non auto & the hantek is not able to see glitches and drop outs due to lack of buffer. I’m my opinion the Autel & 4425 or (2ch) are no 🧠 brainers. You can get the Autel now for $350-375 smackers and have a robust scope. I would also recommend upgrading the leads to pico when it’s affordable for anyone reading this. The quality of hantek leads are low. Great job and thanks for sharing.
@picklepee2771
3 жыл бұрын
How do you feel about the uscope? I considered getting it as my first my scope
@weldingjunkie
3 жыл бұрын
@@picklepee2771 uScope is excellent it’s small and powerful only downside is that it’s a single channel. I would get the Autel mp408 if I were you for a few hundred connect it to your laptop and off you go
@jvandervyver
9 ай бұрын
In the electronics world, these software on your computer scopes are considered the lowest quality scopes. Mostly because the scope company saves a lot of money running the software on your computer and then make the scope cheaper. But it also means the software is often Windows only, runs on very specific versions of Windows and so on. It it is a bit crazy to me that you would spend $1600 on a software scope when you can buy for example SDS1104X-E unlock it to 200MHz and it is has a web-interface so you can still go and use your software views if you really need to. Again, I don't understand why you wouldn't take a scope where they have the built in UI and software on the scope itself. Why is this so popular in automotive?
@harryohanson
3 жыл бұрын
Wow! This is one of those videos that you have to watch over and over. Not only about the scanners but so much more useful information for a guy who things he is being left behind with all this electronic stuff. Thank you so much for taking time to make this video.
@michaelwitmer7536
4 жыл бұрын
Thank you for investing the time. I own all of these scopes. The final one is on the way (4425a) from NY. Being a Professional, I am embarrassed that I didn't buy the Automotive Pico from the start. The ability to share Known Good Cam/Crank waveforms was the last straw. I would go to IATN and see the files saved in pico 6/7 and could not view them. That being said, having the same platform as others is essential. All of the places I have worked want things diagnosed properly, but don't want to invest in the equipment/training/time needed. This pico will be my personal, and I may have to charge my boss everytime we use it. Thanks again for sharing your knowledge.
@siuautomotive
4 жыл бұрын
I'm sure you are going to love the 4425a. It's a powerful scope. But, in case you weren't aware, you can download the Pico software for free at picoauto.com. Then you could have opened up the Pico files from the IATN. The normal Pico 6 would also work to open the automotive files. Either way, I'm sure you won't regret that new Pico purchase!
@antonisantonis655
Жыл бұрын
8:25 the reason why the yellow line is stuck at 5v is because the hantek can measure a max voltage of 5 volts, to make it able to measure up to 50 volts you have to change the switch on the probe to X10 and also change the program settings X1 to X10
@ahwee77329
4 жыл бұрын
i guess the autel scope is a good start .until you get into really fine details ,then i would say pico
@bartscave
4 жыл бұрын
Thanks for taking the time to compare these.
@kastooMcFry
3 жыл бұрын
Great review. Thanks for taking the time. Because of my profession, I have several really good lab scopes but definitely see an advantage of having one of these USB scopes for mobility. You made it quite clear one does not need the resolution of a lab scope. I've used mine for automotive work but it makes for quite a hassle. They run off 120VAC so are also not readily mobile. Seeing you put them through their paces, side by side, I may go for the Autel. Thanks again for your clear and concise review.
@tajjson
Жыл бұрын
Fantastic tutorial, the best I have seen, and believe me I have been watching many videos on this topic. As an newbie DYI getting into car diagnostics, I think I will go for the Pico 2204a
@krismoore5558
4 жыл бұрын
This is one of the best vids on the subject thanks!
@siuautomotive
4 жыл бұрын
Thanks!
@Jayala1971
3 жыл бұрын
Thank you for taking the time to compare these.
@PedroGonzalez-yr6xd
4 жыл бұрын
Hi, how are you? Greetings from Mexico. Congratulations on your channel. I greatly appreciate the effort, time, dedication and knowledge that you share with us. Although in many countries where we speak Spanish, we do not understand English very much. We make a great effort to understand and translate the English language into Spanish. Since all automotive information comes from or is in English. And there is very little information in Spanish. Although Spanish is the second most spoken language in the world. I HOPE FOR THE FUTURE YOUR VIDEOS YOU MAKE THEM WITH A SUBTITLE. MANY CONGRATULATIONS AND THANKS FOR SHARING YOUR KNOWLEDGE.
@siuautomotive
4 жыл бұрын
I'll try to figure out how to do that. Good idea!
@charlesbarkwell7693
3 жыл бұрын
Siu , you've probably already received your answer since this was around August or September 2020 : My 1st investigations would have been Jorge and Carlos Menchu outta Fresno,CA. ( www.aeswave.com ) and IATN. Vietnam Era Veteran Southern California ( 90802 ) Automotive Professional background
@sidgysoho1960
3 жыл бұрын
Much appreciated that you have laid it out on the line for the layman. My eye is keen for the 2 ch, Pico but the Autel is a good value esp. for many of the foreign makes. Also thank you for sourcing the transducers used in the video. You Rock ! Cheers.
@billrimmer5596
4 жыл бұрын
A channel called the GADGETS playlist, formerly The Logical Canuck has done some really neat stuff with the Hantek. He also shows a way to modify the pressure transducers to show vacuum. I just subscribed to your channel. Very informative. Thank u!!
@siuautomotive
4 жыл бұрын
Thanks! I'll check that out!
@robertmullen2480
3 жыл бұрын
i immediately subscribed after seeing this video it helped me a lot I like your channell thank you!
@MicsigOscilloscope
2 жыл бұрын
Hello, this is Micisg. we have a new kind automotive oscilloscope. it has preset automotive function with big screen and battery. are you interested to compare?
@attilasipos2785
4 жыл бұрын
I really appreciate your work. I am planning to purchase my first scope and this video a huge help to make choice.
@siuautomotive
4 жыл бұрын
Glad I could help!
@ingsperalta
3 жыл бұрын
What is your final decision?
@autodiagnostykaiklucze5978
Жыл бұрын
Greatest scope comparation video on YT. Many thanks for that Sir!
@BoundANDDetermined88
Ай бұрын
I first heard of a “lab scope” last week. I’ve used Oscilloscopes in the past for electrical circuit monitoring for communication equipment but now I am forced to learn that automotive components are also controlled by an ECU or ECM and many of the signals are more than just ground and +12 Volts. After watching this presentation, I think I have more questions. But I’ll start with a current conundrum. My wife’s 2015 Volvo has an intermittent overheating issue. The computer brain monitors engine coolant temperature, and (is supposed to) send a digital signal to the electric water/coolant pump which is grounded to the engine, has a 50amp 12v power wire and an emergency backup power supply. It also has a wire for that digital signal that comes from the magic brain behind the curtain. I can measure and verify both power wires are good, and that the ground is good. I would like to be able to measure the digital signal coming from the brain ECM/ECU to the water pump and verify the pump is in fact getting the signal to run at low, medium and high. If signal is present all the time I and pump fails to run, I can assume the pump has issues. Pump was recently replaced, and overheating persisted. All other components for cooling were replaced, to include a second pump. It’s down to that digital signal from the ECU. HOW do I verify that signal is present and what scope is best for monitoring. This over heating issue comes and goes. I’m most interested to know what is or isn’t happening during the bouts of overheating. Can you suggest a course of action and what scope would help me monitor this digital pump signal? Thanks.
@chulito240
Жыл бұрын
My first time diagnosing a misfire with a scope was with a 6022be and an Amazon transducer setup I made. Was able to call it and had a burned valve, Chevy Cruze (year, I forgot). Worked, but have upgraded since then.
@coollukasz
3 жыл бұрын
For anyone with the hantek, just use the formula from the other scopes and do the math manually if u need to ever check pressure. Plug in for x, y is your pressure
@TheKsurf
8 ай бұрын
Great video. I am wondering what anyone thinks of the zotek zt-702s multimeter/ occilliscope. They also now have a two channel version. I think it's the zt-703s. Can it be used in professional automotive as a quick check tool vs say setting up the automotive pico. No I know there are way less features. What is attracting me is save time, quick check, less drama, like hook up see it, get out.
@ericgunter45
3 жыл бұрын
Well how in the world did I not know my alma mater has a youtube channel. Great comparison of the 3 scopes Mr. Boyle. Currently I have a uScope and a Bosch MTS5200 but have been curious about the hantek. Need to tour the new campus looks really nice. Although the new students miss out on using a squeegee to keep the water out of the L2 shop everytime it rained.
@jharrison6557
5 ай бұрын
I'd love to have the autel maxiscope but they're discontinued. Anybody have any idea where I could one? Already checked ebay but no luck
@paulwooton4390
6 ай бұрын
Amazon says the 2204 does not work with pico automotive software. How is this one connected?
@gurvirsingh4890
4 жыл бұрын
Awesome...finally i was able to decide which scope to get...thanks alot
@davidmoss9471
4 жыл бұрын
Thanks for taking the time to do another video. Really enjoyed it
@InverJaze
4 жыл бұрын
Hantek 6074BE has an option for 20:1 now. Along with other probe options. Takes a while to get to grips with this scope. The function wave generator is limited to 1KHz. Though there is an 8 channel option to buy a better scope with an arbitrary wave form generator too.
@bobbaxter952
3 жыл бұрын
I was just about to pull the trigger on buying a 4425a pico,but an 8 channel pico came up for sale used,same price, I bought the pico 4824 but it wouldn't work with the pico 6 automotive software!!I was gutted,i don't know why they limit you açessing the automotive part of the pico software when you have a scope that's more than capable of using itI just resold the 4824!
@siuautomotive
3 жыл бұрын
If I were you, I'd still hold onto the 8-channel. Unless you really want to use Pico 7 software, the Pico 6 can do everything that Pico 6 Automotive can do. It's just missing the "automotive" menu, and to be honest, I never use the automotive presets. If you really like the automotive presets, you can always load Pico Auto on your computer, start "demo" mode, pick your sensor/output, then see how they have the scope set up. Pico Auto also has the automotive custom probes already installed, but I'm pretty sure I mentioned in the video, all you have to do is download pico auto 6 (which is free) and "export" all of the custom probes and then "import" them into Pico 6. Now you have all of the custom probes installed! Lastly, and this is something that you might want, you won't have access to Pico's waveform library unless you are hooked up to an automotive scope. So, I guess it matters how important that is to you, but I'd still rather have that 8-channel scope!
@jameswalls9468
4 жыл бұрын
Your time in this video is greatly appreciated. I wish you had highlighted the Pico 2204a a little more. The questions I have is on the setup and software you're using, I'm unable to get the voltage scale to 10kv for ignition testing. Also, if you're using the Pico 6 Automotive software I'd like to know how you were able to get that to work with the 2204a, I am unable to get that working.
@siuautomotive
4 жыл бұрын
Thanks James, There is a video on KZitem showing how to make the 2204a work with the automotive Pico 6: kzitem.info/news/bejne/o6yDrmGJhZ5eYGU I didn't do that "hack", but I did export the automotive probes from Pico 6 Auto and imported them on Pico 6. Since both programs are free, it was easy to do. Then you can select the ignition probes in the normal Pico 6 in the library. From the Pico Auto Custom Probes menu you have to "duplicate" the probes you want to copy. Then Pico puts the copies into the "library." From there you can export them into a file that you can then import into the normal Pico 6. Hope all this makes sense.
@jameswalls9468
4 жыл бұрын
@@siuautomotive Update, I thought about this and decided to try it again. The first round I had the 2204A plugged into my laptop, this time I left it disconnected while trying it again. Success ! I think the software recognized I was using the 2204A and stopped me from doing this (I may just be paranoid though, LOL). Thanks for your reply !
@rookerb1
4 жыл бұрын
Excellent video. Thanks for posting this. Also great looking shop, clean and clutter free!
@siuautomotive
4 жыл бұрын
Thank you!
@michaelfannin5456
4 жыл бұрын
Awesome video! So the autel software does have 720 degree rulers like picoscope software
@siuautomotive
4 жыл бұрын
Yes it does!
@weshawkins7165
2 жыл бұрын
Excellent video. I’m leaning towards the Autel mp408. I hear from some Autel mp408 users that the leads could be improved upon to clean up the noise. What leads would you recommend?
@siuautomotive
2 жыл бұрын
Aeswave sells some nice leads. The pico leads are nice but pricey. Warwick makes some good leads. Jarheaddiag.com has these and other cool stuff.
@derrickorchard5302
3 жыл бұрын
Very informative video. I am looking at purchasing the Hantek 1008C as I just work on my own vehicles and find it hard to justify the more expensive scopes. Wish it was used in your comparison as it seems more capable then the 6022BE for around $100. Thank you for your time and knowledge.
@siuautomotive
3 жыл бұрын
Sorry, I didn't have that scope to compare. There are a bunch of KZitem videos on it as you probably know. The big issue I had with the Hantek scope was the software. Maybe the software for the 1008c is better. Maybe download the software first then see how well it works for you.
@pigeonsil240sx
2 жыл бұрын
hi derrick I'm brand new to scopes and also do diy automotive.do you recommend i should get the hantek 1008c or somthing else? before this video i was considering the hantek handheld 2c42 scope for around $120.which would you suggest?
@itridz5860
3 жыл бұрын
Very helpful video just in time After getting confused thanks man!
@noahadim
2 ай бұрын
What software works with a 2204 i can use today?
@CanadaElon
7 ай бұрын
Sir, I have the same OBD breakout box.😁
@seshachary5580
Ай бұрын
very educative. Thank you regards
@richardbrown3025
4 жыл бұрын
OMG You are amazing I have been looking for a comparison video for automotive scopes for years and you beat them all I know this must have taken sooooo much time to put together and I really appreciate what you have done Thank You
@KingLoopie1
3 жыл бұрын
Great info, thanks! Just bought a 2205a and I'm still learning how to operate it to use for my auto hobby 'necessity'... Lots of good tips here to help me tie things together. Thanks again for making this available! 👍
@ChevyConQueso
2 жыл бұрын
3 months later, do you feel good about the purchase? Any tips? I am thinking about grabbing one myself.
@KingLoopie1
2 жыл бұрын
@@ChevyConQueso I still like it and use it. 25 MHz is overkill for anything auto related as far as I know. But I tend to wander into other types of electronics too.. I use attenuators so I don't worry much about over voltage. I think if I had it to do over, I'd probably go with the same one only with 2405a with its 4 channels for the extra 2 channels. Sometimes I just want to look at more than 2... Speaking of 4 channels, I did pick up a micsig ato1104 just for the 4 channels and the automotive presets (these are easy to copy or build your own presets and save them in Pico 6 or 7. I still like the layout, ease of use and functionality of the Picoscope 2205a! Someday, when I'm rich and famous, I'll buy a picoscope automotive 4 or 8 channel.
@ChevyConQueso
2 жыл бұрын
@@KingLoopie1 Thanks for the reply. There's a ton to think about buying these, and I too mess with a lot of other stuff that isn't automotive, at my job, as well as home. I got more projects than I'd like to admit... I will consider spending more, because the 4 channels does seem like a huge step up. I've been watching videos and guys have been catching all sorts of issues just by watching more stuff than what they suspect is wrong.
@orville58
3 жыл бұрын
Thanks for sharing your knowledge this is a really good video
@geoffreyrawlings9736
3 жыл бұрын
Good video nice to see what these good wave forms sopose to look like very helpful. Thanks
@reggieshowtos9164
3 жыл бұрын
Thank you for the video. Really nice comparison.
@superiortransmissionpartsi5357
3 жыл бұрын
LOVE THE SHIRT, SEAN !
@1vaquita
4 жыл бұрын
Amazing explained about different scopes...thanks!!!!
@DallasAutoDiag
3 жыл бұрын
As much as I enjoyed watching every minute of your video, as much as I tried to find what's the reason behind the 17 dumbasses dislikes in the video. Great clip. Thanks
@siuautomotive
3 жыл бұрын
Thanks for watching. Maybe it was too long, lol?!?
@TheGibby3340
4 жыл бұрын
While it’s clear that the Hantek is the least capable. Surely it cannot be overstated that for perhaps 1/10 th the price of some of the others you featured...it can meet almost all everyday functionality demands. The lack of memory buffer is a serious limitation. Thx for the Vid. Cheers
@Tk3997
4 жыл бұрын
Pretty much, but the next model up that hovers around ~90 US dollars actually does have some onboard buffer and also more channels. The 2204A shown here was also disconnected and the next cheapest 2205a is well over 200 dollars, so the price gap has actually opened up quite a bit. Certainly as a starter scope or if you're not likely to use the unit intensively everyday the step up aforementioned 90 dollar'ish Hantek 1008C should accomplish most of what you need.
@siuautomotive
4 жыл бұрын
Are you sure the 2204a is discontinued? It's still listed on the picotech.com website, it just says out of stock, but it doesn't say discontinued. You can still get them. I bought 9 last June from www.tequipment.net/Pico/2204A/PC-Based-Oscilloscopes/?/?Pico%202204A&Manufacturer%2FModel&Bing_Yahoo&msclkid=5c6f933cca7f11fbee4bcdd28e0e3616
@fizanmughal64
3 жыл бұрын
Thanks for sharing this much knowledge 💯
@john7017
3 жыл бұрын
Excellent Video! Very informative.
@MarzNet256
3 ай бұрын
Great video. I'm planning on picking up the 2205A with some Hantek leads for advanced DIY automotive. Also, that relative compression test using AC voltage and DSP is very clever.
@smms5056
3 жыл бұрын
👍👍
@joveesmallwood9693
4 ай бұрын
Great video, show others that you really don't need "Automotive oscilloscope" to do a readout. Explaining data / sampling / memory etc. is important. Price too😁
@jum5238
Жыл бұрын
So one of the questions I had, related to one aspect of the MaxiScope... does IT do bidirectional control? You were doing a pressure test, and raising it, but wasn't sure if you were measuring it with the other scopes, but controlling it with the Maxiscope. SOMETHING was doing the bi-directional control. So, was this a scope vs scope comparison, but hiding any extra capability seen in the maxiscope?
@Jmhvalenzuela
4 жыл бұрын
What amp clamp were you using for the autel? Thanks!
@siuautomotive
4 жыл бұрын
I used this from AESwave.com www.aeswave.com/Current-Clamp-60A-AC-DC-with-BNC-p9417.html
@owainglyndwr333
Жыл бұрын
Thanks for helping me decide which scope, others were pointing me in the direction, your vid convinced me. Now waiting for my new pico 2204A. My main requirement will be to test my Diesel injectors. Bought purely for personal use.
@nonyourbuz5805
4 жыл бұрын
...Did You use the exact same Laptop with each ?...
@siuautomotive
4 жыл бұрын
There were all Dell, but I had three laptops going. The two Pico's were on one dell, the Hantek was on the other Dell, and the Autel was on a Dell that was a different model and use an AMD chip instead of a Intel chip.
@eduardotejeda
4 жыл бұрын
Thanks, excellent video.
@pigeonsil240sx
2 жыл бұрын
maybe someone can chime in,as a automotive diy guy who wants to start using oscillioscopes what would be a suggested scope?i was considering hantek 2C42 handheld OR the $60 hantek 6022bbe seen here.
@OTGASMR
4 жыл бұрын
Great Video. Thank you
@omegaman7241
3 жыл бұрын
I have a 2005 4 runner 4wd with the 5 speed auto 6 cly eng. I had dirty smelly fluid and flushed it, rusty lines and changed them with same sized rubber lines for transmission use, and added an oil cooler bypassing the rad in case it breaks. My reverse does not work, It will rev and seem to move a little but not enough power to move it. it will work in 4 low it will reverse more but not as much as normal. Goes forward fine in all gears, but in reverse in 2wd will hardly move at all, there are some noises at times. Any tips thoughts appreciated. thanks
@jonsvideos321
3 жыл бұрын
Great video!! Thank you!!
@randalljames1
Жыл бұрын
spark line on the 8b scope was kinda sketchy.. but the basics looked pretty good.. I grew up on Sun scopes since the 70s in my shop and so patterns are ingrained :) I miss having my suns.. I had the small portable (850?)and my big 1100ls in the shop when I sold out and retired from that back breaking biz..
@lupo631
10 ай бұрын
Thank you very much for your effort and effort in testing the different oscilloscopes. It helped me alot! Thanks!
@gerigesquiere66
4 жыл бұрын
Very interesting. Many thanks.
@leisurehobby9980
3 жыл бұрын
THANK YOU SO MUCH :)
@alaingillot4718
Жыл бұрын
up side down , cut the probe coax and switch wires around , or make a small patch cord with reverse polarity .
@deriklfixit
3 жыл бұрын
JUST SOOO AWSOME!!!! THANK YOU
@jaysgtslife
4 жыл бұрын
Good stuff my friend. Much needed information
@brentsmith5647
Жыл бұрын
Brilliant video thank u 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@pigeonsil240sx
2 жыл бұрын
would the $60 hantek be better then purchasing the $150+ hantek handheld scopes?
@jaky3
3 жыл бұрын
Doesn't that constant beeping from the car drive you crazy?
@siuautomotive
3 жыл бұрын
What beeping? All I hear is ringing in my ears 24/7. Wear your earplugs kids, lol. No, but really, wear earplugs. This tinnitus thing really sucks!
@jaky3
3 жыл бұрын
@@siuautomotive Hah, have to agree there. It's a pain. Great comparison video by the way! Would you say that an 8-bit scope that doesn't have resolution enhancement like the pico be too difficult to read in some situations? Looking at the Owon VDS1022i, for vehicle diagnostics.
@jaguar27347
3 жыл бұрын
great job baddy
@ilovear15
Жыл бұрын
Thank you very much for excellent explanations of the different systems
@saab770
4 жыл бұрын
great video well done
@ChevyConQueso
2 жыл бұрын
This helps out quite a bit. I've been learning how to use some lab scopes at work and this clears up a lot of what it takes to use them for automotive. It's also good to know that the Autel scope is a good value for the money. I helped a friend of mine compare scanners for a few days and a MS906 Pro-TS would cost you about the same as a MS906-Pro and their 4 channel scope. I know where I'd spend my money- that's a lot of bang for your buck. I wouldn't be making enough money off of TPMS crap when Discount is right down the road anyway.
@amundsen575
2 жыл бұрын
great video, non objective and extremely thourough
@austinsoleyn3984
2 жыл бұрын
Hello my friend so good that you can share thanks for all . keep up the great work
@sheerwillsurvival2064
2 жыл бұрын
Wow just what I was looking for thank you 👍🏻👍🏻👍🏻
@fredsalter1915
4 жыл бұрын
He reminds me of Roy Batty ;-) Outstanding video, however. I just bought a 4225A and am starting to explore automotive diagnostics using a scope. Thanks again for the excellent vid!!!!!
@alexandriabowe
4 жыл бұрын
I just got a hantek scope to learn with thanks for the share
@trublue2319
3 жыл бұрын
How's that going for you
@captbarb6642
Жыл бұрын
I'm been looking for a reasonable priced scope to use at home on cars and this video was just what I was looking for , showing how to use the software etc. Still haven't decided between the maxi scope and the Pico the maxi scope is nearly four times the amount of the Pico the cheaper Pico that is in the UK, but is it four times the scope .any advice welcome I'm thinking the maxi scope with the channels and the 12 bit better graphics .
@pwirg
2 жыл бұрын
Great presentation. I learned alot being just a beginner. Thank you for taking the time.
@ernandejesus1641
Жыл бұрын
Obrigado amigo por você está compartilhando o seu conhecimento comigo!
@LastMountainMotorsports
2 жыл бұрын
An incredibly informative video! Some scope videos can be hard to follow but this was well explained and very clear. Well done!
@mugsymydog
3 жыл бұрын
I have the Autel scope and purchased an low amp clamp from ASE wave. The clamp has two settings the 20 amp and 60 amp. Autel menu only has the 20 amp setting and the a 65 amp. Do I have to make a custom probe for the 60 amp setting. If so how would I do that. Thanks
@siuautomotive
3 жыл бұрын
I think it will be the same. If you need to change the custom probe, go to tool, custom probe, then make a copy of the amp clamp. You can go in and edit the copy, but I think the formula is the same for the 60 and the 65 amp setting.
@raviautoscanning
3 жыл бұрын
Hantek software is poor. But hantek hardware can use with Hscope which can use on android platform. Much improvement. Try it
@siuautomotive
3 жыл бұрын
Yes sir! I do have hscope on my old android. I wish there was an iPhone version. But I agree, it’s worth paying for the pro version to unlock the scope capabilities. Hscope even has ac coupling!
@richborzea4589
3 жыл бұрын
Very informative. Does the software come with scope purchase, and does it ever need updated? I am strongly considering buying the Autel Maxisys Ultra. Is that worth it? Not sure which way to go. I have never used a scope. Thank you for your time and input. RB
@siuautomotive
3 жыл бұрын
The software for each scope is downloadable from their website for free. They do update them frequently, especially pico. Personally, I’d buy a scope separate from my scan tool. The Autel maxi scope is a real good deal and you can find it as cheap as 300 bucks. JDTCO has them on clearance right now at 300.
@reubenmiller7988
8 ай бұрын
Very well done! No fluff just great info
@jamesmetz5147
2 жыл бұрын
Thanks. A little practical scope. Great at twice the price.
@rohithanagaraju9890
3 жыл бұрын
Wonderful explanation. Very detailed analysis. Thanks.
@mawk541
2 жыл бұрын
Impressive technology, software and hardware. Thanks for sharing this demo.
@irishislander4x4diagnostic36
2 жыл бұрын
Awesome video,,, thanks for taking the time to give each scope its chance to see real word performance.
@higg1nsch
4 жыл бұрын
Allow comments. Let’s go. Allow comments. Let’s go
@markm0000
11 ай бұрын
Wow you’re a really smart guy. I got a lot to learn.
@stevewinegar9053
Жыл бұрын
Can you put a link to buy the AC filter banana clip? Thanks
Пікірлер: 210