I use spoons myself, And I lube the crap out the red bladder and the tire bead. The reason for me at least to use the tubeless is light weight for low hp bikes like the Honda CRF300L/Rally. Switching to Alu sprocket and tubeless saves weight on that rotational mass. It might be in my head but I feel like I can feel a significant difference.
@AdventureDaily
Жыл бұрын
* (The Boots have been claimed! Congrats @Lukefish) * Thanks to BRUNT for sending me these boots and supporting the channel! Here's the site if you want to check them out bruntworkwear.com/advdaily10
@wherewithalmoto
Жыл бұрын
I think these might be the next pair of boots I order! I signed up on the website so I get the notifications and discount! Thanks for sharing!
@dylantorkelson7895
Жыл бұрын
Can’t believe your subs are not higher
@AdventureDaily
Жыл бұрын
Road to 100K!!
@dylantorkelson7895
Жыл бұрын
Can’t wait for summer. just picked up a 250f ordered the Baja headlight and tusk light kit
@pinecone3604
Жыл бұрын
Definitely you make some awesome videos and your editing is great. So Definitely should have more.
@brianbennett6978
Жыл бұрын
Last time I used Dawn to install my E07+.
@rickcummins6198
Жыл бұрын
Way to go Lex ! You did great ! My bad knee and hip hurts watching your gymnastics. Lol
@danarussell4246
Жыл бұрын
Been using Bridgestone Ultra Heavy Duty tubes for over 20 years. The tube would eventually fail at the the valve stem from changing them so often. Always carried a spare tube (cheap one) and tire changing equipment on my dual sport rides. Finally switched to the Nitro mouses 3 years ago not because I was unhappy with the HD tubes. Just got tired carrying the tube and tools. I just pull the Nitro’s once a year and call it a day.
@joelappin9735
Жыл бұрын
Alexis did a great job. I have a rabaconda, and it's still challenging. Some tires are a lot harder than others. My tires usually hold air for about a month or 2. I usually check my tires every couple rides.
@TheKarelKramer
Жыл бұрын
Experience helps. Use 2 or 3 bead buddies. Better tire irons would help as well. I use one large zip-ty racing long tire iron with aluminum handle. I use the good motion pro spoons with the loop at the end. I just use soapy water or windex. Watching the tubeless video and following it exactly helps. If they are in correctly they don't lose pressure. For cactus thorns a tire sealant like Slime helps a lot.
@RealSuburbanCowboy
Жыл бұрын
When taking a tire on or OFF, LUBE is always helpful! It's all about the lube!!
@ridgetop8161
Жыл бұрын
My wife walked by and asked why she's risking those expensive nails on the tire lol. Always use protection when playing around with a lever. 😀
@mmaaddict78
Жыл бұрын
How about a C clamp squeezing the tire together where you had the bead buddy? Think that would gain any for the tire to fall down into the rim trough?
@canadianktm569
Жыл бұрын
Good idea never thought of that before!
@Pro-Amateur
Жыл бұрын
Those Grunt boots would serve me well…while I’m WAITING for my 300 Rally to eventually come in! Love the content, as I’m new to the dual sport riding world. Keep it up!
@luvbgrass
Жыл бұрын
I just bought a 300 Rally. Shop near me got a used one in. 2022 with 610 miles on it. The guy that bought it was short and kinda have a little problem so he sold or traded it back. I latched on to it because they are pretty hard to get right now. I've only been able to ride it 20 miles so far due to weather. I think I'm gonna like it. 😁
@harrynut3044
Жыл бұрын
Old School tip.....use C-clamps to squash the tire where needed.
@sewkingwet
Жыл бұрын
Safety glasses…..nice job Lexi , I haven’t even done a tire yet, rebuild everything else and laced my a60’s but no tire yet, that stand is sick too!
@DRZWhisperer
Жыл бұрын
I use the No Mar station and bucket O lube to do my MX, enduro, and street tires. I very rarely use a spoon
@martincooke6230
Жыл бұрын
Rear tyre is easy. Front tyre is harder to get on as the Tubliss takes up most of the rim. 2 x Bead Buddies and a couple of G clamps to squeeze the tyre into the drop centre helped me. Getting it off again with out picking up the red liner? Still working on that.
@MotorcycleRebuilds
Жыл бұрын
I just use a 3m sealant tape with a crystal clear vinyl gorilla tape as a protection layer. Couple all this with a regular street value stem and it will hold pressure.
@fuellerr
Жыл бұрын
Love the Tubliss system I have been using it for the past 3 years for Moto. On the rear, I have had no problems with the front tire I stopped using it. At first, on the front, the system would go flat overnight once I solved that problem I had multiple inter bladers go bad the little tube would split at the seams or the valve core would tear away from the tube.
@TheKekke69
Жыл бұрын
Hello from France The front tire is really tricky So first congratulation I tried 2 times I put a bib for the front But i got expériences from the rear... So i will try the next front tire with a new high pressure chamber I use spoon tire iron ... front tire is more tight ans it's not easy to touch the red chamber... And notice to verify if your HP Tube is ok before put your tire Inflate deflate...😊
@jasonhalcomb308
Жыл бұрын
i could use a bear of boots i ride the crf 250f also and love it
@leftymike8730
Жыл бұрын
Thise boots would be awesome for my 19yo son. He just got hired by an hvac company, it’s his first real full time job and he could use a good pair of work boots. Either way, absolutely love your channel, keep up the great content!
@lukefish7562
Жыл бұрын
Get it Lexi! 💪🏽 I am a size 13 and just wore out my boots. For real.
@AdventureDaily
Жыл бұрын
Say less!! Send me an email.
@lukefish7562
Жыл бұрын
@@AdventureDaily man you’re too kind! We have a lot in common bike wise and lifestyles and even the oh giant feet! 😆 I really appreciate it! Email on the way! 🙏🏽
@claudemarchand1196
8 ай бұрын
heat the tire with a small propane torch as you work the tire back. with a light flame it dont hurt the tire.
@roberteddy1951
Жыл бұрын
Tip for the Murphy tire lube: Put a glob of lube in a empty Gatorade bottle then fill rest of bottle with water. Shake well and let it set for a few days then shake it up again (Takes a few days to dissolve). After it has dissolved in water put it into a spray bottle. A lot easier to use than messing with the gooy stuff.
@lyndonewright330
Жыл бұрын
I use to run tublis it was ok my main complaint with it is you have to check the air pressure in your bladder if it sets for a week at least mine did u finally went to bib moose no more worries about flats and if you ride on the highway with the tublis you will feel some vibration if you go very fast im not putting them down I used it for 4 years but I would recommend when you replace a tire you might want to consider putting in a new bladder I learned the hard way but as they say different strokes for different folks
@likkitongue
Жыл бұрын
Elevator music is dope 👀
@paulcamino5034
Жыл бұрын
I used tubliss for about 2years, to me it is way more maintenance, $$$ and it does lose air so your checking every ride, so for me just the conventional tube and 12-13lb air offroad or 15 - 18lb 50/50 dual sporting works the best, If your doing a long long adventure ride just carried extra tube, patches, bicycle pump, spoons. if you really stress it that D sport tire can be ridden 30mi on a flat,
@tomtanks13
Жыл бұрын
I was just on their website looking at boots. I am a size 13 as well. Picked myself up a Husky 350 s after seeing you get one too. Keep up the content!!
@88adventures
Жыл бұрын
Great content! I've been wanting to try out tubliss on my kdx. Can't wait for the review after some hours. Good job Lex!
@knoxthe6686
Жыл бұрын
I would love those boots and really need a new pair have been looking but don’t have the money
@JS-gp7mz
Жыл бұрын
ok so one of the reasons you probably had a stem failure is because they recommend you place the rim lock closer to the tube stem. The instructions show 4 spokes apart or you will damage the liner. Also use Armoral and spray the entire red inner liner and it will go on by hand. The inner liner will lose some air like any bicycle tube with high pressure such as a road tube so you should at least check it. You can run some tubeless sealant in the chamber part such as Stans Notubes which works great for these and will seal smaller holes but always carry a plug kit. Plus if you get a flat in the chamber part and the inner liner stays up you can generally ride it out as it will hold the tire in place and keep it from coming off the rim.
@harrynut3044
Жыл бұрын
Lex, make sure you are directly straight across from the Bead Buddy. If you Clamp the Bead Down at 12 o'clock, your use your 1st spoon at 6. Starting at 7 or 8 makes it much harder. Lube the bead as well....Lube is good, lol.
@themotonoobusa9710
Жыл бұрын
I've never changed a motorcycle tire but I watched a video where a guy was using a "Original Baja No Pinch Kit" though I think it only works for installing.
@15brucet
Жыл бұрын
I'm a welder on navy nuclear submarines and am a size 13! I'd deff take them boots and test em out!
@austintaylor753
Жыл бұрын
Yoooooo I’m a huge fan of this page! Just bought a 2023 250f because of you love the content! Also a size 13 😂 love to rock those BRUNT boots!
@StackzzofWax
Жыл бұрын
i like to use the blue handled tusk tire spoons. i prefer the shorter handles. I'm no expert though lol
@UnapologeticAmerican-ey2wf
Жыл бұрын
I’ve been seeing ads for these boots and I’m curious how comfortable they are. I am also size 13.
@michaelanderson3771
Жыл бұрын
Great job Alexis. It aint easy and more so on the side of a trail without a wheel stand or a bucket. I have smaller 8" long spoons in my trail pack and luckily have only ever struggled when changing tires as have been using HD tubes and never had a flat in the last 20 years but don't run as low as 5 PSI. Maybe the lowest was 8psi but usually run 10-12 psi as I ride asphalt also to get to the trails. lots of hard pack or rocky trails and forest roads and yellow and red Clay soils and mud where I ride. river and creek crossings Never had issues with traction on the XR so never saw the need to run as low as 5 or lower. and never bent a rim either. But that is just me.
@VinnyV_01
Жыл бұрын
I need that stand. I've done too many tires on the floor with boards for keeping the rim off the ground.
@mkanalytics1355
Жыл бұрын
Good job guys! Great to see you are having fun together.
@kickedintheballs2000
Жыл бұрын
That’s a damn fine click bait picture , so nice I clicked twice 😂. Great stuff as always man 👍.
@wherewithalmoto
Жыл бұрын
Are the brunt boots non slip? I'm a UPS driver and go through boots often. Also wear a side 13🤘😁🤘
@shivpalpatine
Жыл бұрын
what if the red high pressure gets punctured? I dont understand the difference between this and regular tubed tire when it comes to not being stranded in a trail doing a repair lool
@BobbyDraws.me2
Жыл бұрын
Tip: Try using a longer tire spoon for more leverage.
@billcotton1551
Жыл бұрын
Great job Alexis! Tanner ,do you think I could wear enough socks to make the boots fit my size 9 feet?
@rod1781
Жыл бұрын
She did great it's funny but I'm a traveler to and I'm actually in dublin ohio right now missing my bike but with the ohio winter just didn't make sense to bring
@WestNebraskaAdventureChannel
Жыл бұрын
I’m a carpenter and wear a size 13. I would love to win the boots and would put them to good use!!!
@JonnyRides
Жыл бұрын
The struggle! 🤣
@BAYAREAMX
Жыл бұрын
Alexis did such a good job she should do it over. Especially because she put the front tire on backwards. Haha
@jamesgnarkill3112
Жыл бұрын
This was really fun to watch!!!!! Thanks
@RAILWAY_FILMS
Жыл бұрын
how much does this system weigh ?? I am thinking?? do I really need super low tire pressure??? its pretty cool. I remember getting super strong tubes back in the day.. not even sure if you can still get those. they were like "clear" I think and supposedly puncture proof. (from the 1990's).. I ran some tires SO worn I mean you could see the radio strings all around the entire tire on one bike.. and I rode it that way for 6 months before finally changing the tire. probably not smart.. forget about the traction.. the side knobs would grab a little I guess.. (rear - I wouldn't ride with the front that bad but the front was a banana peel as well but no radials showing)
@sparkyboots
Жыл бұрын
What happened to the X-trainer?
@billmullins5821
Жыл бұрын
You going to make any new videos on those 250f bikes
@billmullins5821
Жыл бұрын
I have a 2021 250f and love I
@urbancavemanintheak7732
Жыл бұрын
You are a Rockstar Alexis, nice job 👍
@danovision
Жыл бұрын
I do wear a size 13 bub
@robertandersson2523
Жыл бұрын
What tires are those?
@AdventureDaily
Жыл бұрын
Tusk D Sport! bit.ly/TuskDsport
@supascalerc177
Жыл бұрын
I’m a size 13!! Haha nice boots 👢
@thepaintballnoob7982
Жыл бұрын
Deeez he’s a good boy 🥰 6:53
@Motolympics
Жыл бұрын
Good job Alexis
@ballfoot15
Жыл бұрын
Ya boi is a size 13 and in need of some boots😂
@chriswest2290
Жыл бұрын
It's not easy ma'am. You're doing well 👍
@thepaintballnoob7982
Жыл бұрын
2 STROOOKKEEE
@roberthaberman9491
Жыл бұрын
I found the front tire to be harder than the back.
@zap...
Жыл бұрын
tubeless tube-top?
@AdventureDaily
Жыл бұрын
Now that's an idea...🤔
@WickedGrom
Жыл бұрын
Well, Would you look at that, beautiful boots for a beautiful man who wears size 13 like myself. Hell ya!
@mikemayhone2856
Жыл бұрын
I'm a size 13 boots and I need a pair of nice boots
@dylantorkelson7895
Жыл бұрын
Woo
@moemuggy4971
Жыл бұрын
Dang homie, you need to find out why you're shadow-banned. I used to get notifications whenever you posted, now I have to search for your videos. You got 90.1K subscribers and only average 2 to 4K views per video. That ain't right.
@c0ck_l2oach75
Жыл бұрын
Let's go! Size 13! Boots look sick.
@dadge2500
Жыл бұрын
And she did not even break a finger nail 😊
@ronsmith7262
Жыл бұрын
Ok so everyone is a 13 but when it comes to changing the tire try this trick= use a grinder to cut the wire on both sides and it loses all its power to stay on
@chronicblend5334
Жыл бұрын
use windex as a lube
@elafricano2995
Жыл бұрын
NIce one Alexis, use gloves for God sake 😁
@NANA-qn8on
Жыл бұрын
No soapy water? Amateurs.
@adambatchelder4121
Жыл бұрын
Tire changing is about technique not skill
@eriknash8783
8 ай бұрын
What is the real benefit of tubliss? I'm also replacing tires 5-7 times a year and I wouldn't want to deal with that mounting over and over. You also only showed the front, which is so much easier Just seems like a pain in the ass to install and I wouldn't want to have to deal with an issue on the trail during 8-10 all day ride. Also, I would have scotchbrited the inside of the rim and removed all the bullshit residue
@vinniem4404
5 ай бұрын
There are tons of benefits to using tubliss. The main one is offroad traction, obviously. I ride with a lot of people that use this system all day and don't have a problem. A seasoned rider, such as yourself, checks their tire pressures before each ride anyway, so that's no extra inconvenience. I think you are misunderstanding how the system works. It actually makes an "issue on the trail" easier to deal with. With Tubliss, you don't need to carry heavy / bulky spare tubes and tire spoons. You can use a tire plug, reinflate, and keep going. The tire doesn't need to come off the rim or the bike. Way easier. If you want to, you could run it flat, since the inner high pressure tube still has pressure.
@paule5812
Жыл бұрын
Great job Lex💪🏻, have you guys tried using 2 beadbuddys? It might help a little better 🤷🏼♂️
Пікірлер: 93