Thanks Patrick can’t wait to have it all completed and usable
@one4stevo
Жыл бұрын
Nice machine joe.
@MachiningwithJoe
Жыл бұрын
Thanks Steve
@taranson3057
Жыл бұрын
Nice revival of a classic machine. Your grinding wheel appeared to be a bit out of balance, might want to check that.
@MachiningwithJoe
Жыл бұрын
Yeah haven’t dressed it yet just couldn’t wait to see it spinning. Will be covering that and the vfd install next video. Thanks for watching and being so observative all the best.
@HM-Projects
Жыл бұрын
It's in reasonably decent condition for a 100yr old machine, glad it didn't get scrapped.
@MachiningwithJoe
Жыл бұрын
Yeah it is , amazing to think this machine has lived through a world war
@JSmith19858
9 ай бұрын
@@MachiningwithJoe Yours is a later machine that was built into the 1970s. Mine is the early type as the column and head are one casting, and the lead screw arrangement is different. It also has an Air Ministry supply plate as it was supplied to Airspeed in Lymington in 1942.
@johnsimpson8652
4 ай бұрын
It isn't 100 yrs old ,probably 1950s ,I had one that could have been 100 years old ,it was a completely different design ,more round looking castings and the wheel was on on a ram and driven by a flat belt. I now have one newer than yours with centralised lubrication ,probably 70s but looks very similar.
@HaxbyShed
10 ай бұрын
Very useful thanks. Cheers
@geraldpepper404
Жыл бұрын
Great project. That will be a nice addition to your shop.
@MachiningwithJoe
Жыл бұрын
Yeah I’m hoping so Gerald fingers crossed for some really nice finishes.
@joemcgarry1106
Жыл бұрын
I will bet it will grind like a champion. Thanks for the video Joe. I am looking forward to the next one.
@MachiningwithJoe
Жыл бұрын
Let’s hope so Joe, glad you enjoyed hopefully you won’t have to wait as long for the next one.
@andrewdolinskiatcarpathian
Жыл бұрын
Brilliant acquisition and project. Great start to an interesting and informative restoration. Looking forward to seeing it progress. 👏👏👍😀
@MachiningwithJoe
Жыл бұрын
Thanks Andrew I hope it’s going to give some of my projects in the workshop that final mirror finish I’ve always wanted. Great to hear from you aswell.
@Mexmanix
Жыл бұрын
Nice piece of kit Joe; I assume the rise & fall of the knee is ok as you haven't shown any dismantling & checking on that.
@MachiningwithJoe
Жыл бұрын
Thanks Mexmanix, yeah there was no obvious issues with the knee so until there is I’ll leave alone. The old if it isn’t broke don’t fix it
@georgeclements2742
Жыл бұрын
What a nice acquisition.
@MachiningwithJoe
Жыл бұрын
Yeah so glad I managed to get one this size for my small workshop.
@tandjrogers
Жыл бұрын
Well done mate (from Aus). I've just bought a new centre lathe and new mill, plus tooling to suit. They just don't look as good as older machines. I grew up around my Dad's workshop/s and I miss the 'feel' of that stuff. Anyway keep up the good work Joe. Yes mate, I've subscribed.
@MachiningwithJoe
Жыл бұрын
Thank for for subscribing to the channel, new or old great that you got some kit now to start machining your own projects. 👍
@howder1951
Жыл бұрын
Looks good Joe, there will be some nice projects to follow, I am betting! Cheers!
@MachiningwithJoe
Жыл бұрын
Thanks Howder I am really chuffed with it so far
@bobweiram6321
Жыл бұрын
Translation: O (All). Piwa dwiw (Pillar drill, or drill press). Miw (Mill). Mperio (Imperial). Sado (saddle).
@GrumpiesGarage
Жыл бұрын
Nice one Joe.. I have a pdf manual for that machine if you would like a copy sent to you let me know how I can contact you.. Regards Dave.
@MachiningwithJoe
Жыл бұрын
Dave that would be amazing if you do, I have been searching everywhere for one. If it’s ok could you email it over to me at machiningwithjoe@outlook.com Many thanks.
@GrumpiesGarage
Жыл бұрын
@@MachiningwithJoe Manual sent 👍
@MachiningwithJoe
Жыл бұрын
Thanks so much Dave that’s amazing. Thank you for the support and same back to you if you ever need a part machining or advise if I can help I will. All the best.
Пікірлер: 32