All hail the glorious sledgefire, well done. Definitely a good idea now to reinforce with putty in the slots of the lever arm.
@CaptainXavier
7 жыл бұрын
I plan to...then I plan to apprentice under the master of the sledgefire until I learn some of his tricks.
@landonleverett3224
7 жыл бұрын
Captain Xavier love you're vids keep up the good work and can you make a can it take a K26 video about the rival blasters
@bigchungusofficial5393
3 жыл бұрын
Hey beret, how you doing ?
@floppyori3262
7 ай бұрын
Sludge fire
@scarlettbandit2803
7 жыл бұрын
I love the Sledgefire. Perfect for when you need to dispense justice, one shell at a time.
@ryansadventures8708
4 жыл бұрын
Scarlett Bandit of you need to dispense justice I would use the, the judge
@freedomlover7768
3 жыл бұрын
Hey man, a mossberg mag-fed shockwave is a pretty cool gun
@TheNothingYT
3 жыл бұрын
trilogy: hold my shells
@BratcherLev
7 жыл бұрын
12:58 "Bratch will be so proud of me." I am. I truly am.
@glitche7220
4 жыл бұрын
Aaron Bratcher ya
@mattb6740
7 жыл бұрын
you should do a, can it take a car battery, for flywheel blasters. Thumbs up if you agree.
@deanodean4972
7 жыл бұрын
he would need to put new motors and flywheels because the stock motors wont ever hand it, how ever they khaos and nemesis might be able to
@pokeracerfanffanandpokemon9634
6 жыл бұрын
deano dean yeah and the mastodon
@ThomasFarquhar2
6 жыл бұрын
Lol will shoot at tanks and snap them
@CaptainXavier
5 жыл бұрын
I know it sounds impressive...but car batteries are only 12.6v. 3s LiPos are 11.4v so it is not even that much more. I mean, EIR currently runs on nearly 16v.
@CaptainXavier
5 жыл бұрын
@@narenthebeesechurgerman422 yes, but that in no way effects what motors you can run on them, just how long they will run.
@danemorgan1794
4 жыл бұрын
Imagine a roughcut with all 8 barrels brassed with k26 and metal internals
@MaddRoxYu
2 жыл бұрын
Smoothslice
@LambdaMiscellaneous
2 жыл бұрын
@@MaddRoxYu nice
@lissaxitray8110
2 жыл бұрын
@@MaddRoxYu nice
@PurplSkater
2 жыл бұрын
That'd be one hell of a shotgun for nerf
@akziongarcia4112
Жыл бұрын
@@MaddRoxYunice
@funnydude447
7 жыл бұрын
Can that pack of Skittles take a k26?
@infectedruby
7 жыл бұрын
Rattlebones Tv I don't think so it is reverse plunger
@JoeKen
7 жыл бұрын
yes it can in fact i have personally tried it myself and it is now my primary at all wars because it indeed hits like a truck. jk
@w6rv
7 жыл бұрын
Rattlebones Tv lol
@yaboidustin2447
7 жыл бұрын
Leigh Peterson OF COURSE NOT 😂😂😂 THATS SO FUNNY
@yaboidustin2447
7 жыл бұрын
Rattlebones Tv yes
@meroastisruined3039
7 жыл бұрын
Uploaded 18 seconds ago? Dang it I'm late, also quick question do I need orange Fanta and skittles, also what flavour skittles do I need?
@dartanyonharris9705
7 жыл бұрын
lol
@CaptainXavier
7 жыл бұрын
Yes, the skittles and Fanta are required. However, you are free to choose your preferred flavor of skittles. A man's skittle flavor is his own private kingdom.
@meroastisruined3039
7 жыл бұрын
Captain Xavier asking a man to eat a flavour of skittles he doesn't like is like telling him to jump off a cliff
@yaboidustin2447
7 жыл бұрын
Nathan Beck okay that makes sense
@froopty1854
7 жыл бұрын
Captain Xavier sour skittles >:)
@CowMando
7 жыл бұрын
You said the stock spring of the Sledgefire is basically K26 with a smaller diameter. My question is, since blasters like the Retaliator and Recon MKII can't take the K26 because the diameter is too big (hangs on the plunger catch), is the stock Sledgefire spring narrow enough to fit? And how does the C-836 compare with the stock Sledgefire and K26? Would it fit in a Retaliator/Recon MKII?
@lochlannwatling3482
6 жыл бұрын
Good point
@hielke-gaming7997
5 жыл бұрын
Good point
@xtout
5 жыл бұрын
Good point
@synthvt
5 жыл бұрын
Good point
@yaboi6006
4 жыл бұрын
Good point
@MGlBlaze
7 жыл бұрын
I like the rear prime idea for the roughcut. I was going to do something similar myself by sticking the front of a roughcut on a strongarm handle and back end, but I just kinda got bored of the project half-way through and never really bothered to go back to it.
@alrhakz8270
7 жыл бұрын
cap ,are you making a video for eir's data,such as crono data and range? or you broke eir?(i hope not) pls reply
@CaptainXavier
7 жыл бұрын
Eventually...
@JunkboxSP
7 жыл бұрын
Yay, my little Sledgey can be upgraded! Now, I must wait patiently for the day you actually finish out the shotguns, and apply k 26 to an Atlas... Although to be fair, the Atlas has similar gearing systems to the Rough Cut, and it's already got a monster of a spring inside of it, so who knows, maybe k26'ing it is actually a downgrade. We'll see.
@raquelkhu7722
6 жыл бұрын
"Anything with x in the name is cool." Harmless self-promotion, I get it.
@komitadjie
6 жыл бұрын
Have you ever considered modifying Sledgefire shells to fire other projectiles? Like, a mega dart, or Rival rounds? It seems like there might be enough room there for a single? That air cylinder is *humongous* and carries a darn big spring...
@CaptainXavier
6 жыл бұрын
Yes, I have a number of specialized shells for it.
@BryanWasHere89
7 жыл бұрын
I would love to get my hands on all of those someday. Now, the only other shotgun I can think of, that I'm K26 curious about is the Double Dealer. Heard it's kinda bad. Wonder if a K26 could help it not be.
@northumbriabushcraft1208
5 жыл бұрын
The rod is too thick... I've heard that before during my teenage years...
@CaptainXavier
5 жыл бұрын
Somehow I doubt that... ;P
@pringles3254
3 жыл бұрын
@@CaptainXavier ooooo ouch
@ibrahimshokry4084
7 жыл бұрын
really looking forward to the rear prime rough cut conversion build guide. good work.
@AzuriteCoast
7 жыл бұрын
Hey Chaylo, I was wondering, what if the mechanism (or vital parts) of the Roughcut was made from metal? Would that give the mechanism enough strength to handle a K26?
@CaptainXavier
7 жыл бұрын
Probably.
@koningbolo4700
7 жыл бұрын
Carl Orff, Peter and the Wolf... I am impressed mon Capitan...
@Kikabopom
7 жыл бұрын
Can the SlingFire, Ionfire, Doominator, or any of the Vortex blasters, take a K26?
@seal3626
7 жыл бұрын
Kenpachi Ramasama No, yes, kinda, Definitely no
@isaacwithrow9024
5 жыл бұрын
Do you still have this barrel brake ? Would you be able to part with it? How much more FPS do you think it would get with brass breach ?
@franklinjentertainment8150
2 жыл бұрын
The way said you learn something new everyday. True
@TheRealSarceus
7 жыл бұрын
Would brassing the barrels on a RoughCut be a good idea? I plan to keep the pump-action, with 5 kg springs, so I was wondering if that would be powerful enough for brass to be useful.
@bmwalkerw5226
5 жыл бұрын
HELLO CAP. i have a question, my rough cut will work when you first get it , but after 1 or so hours of use, will stop double firing. do you know why?
@CaptainXavier
5 жыл бұрын
Sounds like it gets tired...
@bmwalkerw5226
5 жыл бұрын
@@CaptainXavier ok gotcha:)
@johnnyjolly2985
7 жыл бұрын
This is my favorite series it is awesome captain x keep up the good work
@joshuellejulian8058
7 жыл бұрын
great great great!!...your vids are always great!!!
@rvinfalls5200
4 жыл бұрын
What spring did you add to the barrel break?
@senorali
7 жыл бұрын
I know it's a super janky way of doing things, but how feasible would it be to externally connect the pump grip to a pullback prime? That would give you the comfort of the pump with the durability of the pullback, albeit with some added bulk to the shell.
@a.velderrain8849
7 жыл бұрын
Can the Sledgefire spring be used as a k26 substitute for modding other springers? I suspect in theory the answer is yes, but it may not be the right length. Are there any blasters where you used about the same length of k26?
@CaptainXavier
7 жыл бұрын
I suspect yes as well. I have not had a chance to test it yet. I'm sure someone has so there is always Google. :)
@busterc701
7 жыл бұрын
For the back prime Roughcut would it be possible to make a cross bow type prime for it, so it would be easier to prime with heavier springs
@CaptainXavier
7 жыл бұрын
Yes
@pimstok790
6 жыл бұрын
hello Captain Xavier, i have a question about your sledgefire, what excacly did you do with the airseal at the plunger tube? greetz from holland
@CaptainXavier
6 жыл бұрын
Nothing...that I know of...
@pimstok790
6 жыл бұрын
Are you using it also singled? couse in that case you had too cut out the middle piece right?
@CaptainXavier
6 жыл бұрын
Yes...and no...not that I know of...
@pimstok790
6 жыл бұрын
oke thanx for the fast reacting, anyway i love your mods and vids, keep up the good work :)
@mercutio440
7 жыл бұрын
Yo X, what supplies that lovely loose spring box of yours? If supplemented from Fastenal, would you mind sharing some product codes?
@Blight_750
7 жыл бұрын
I recently modified a brainsaw and it surprisingly can take a big spring load Don't know if the end of the plunging rod will be too small for the K26 to push the rod forward But it looks reasonable Try it out if you would like
@CaptainXavier
7 жыл бұрын
I will...if I ever get one.
@Blight_750
7 жыл бұрын
Captain Xavier Sounds great 👍🏻
@disorganizedbones8139
5 жыл бұрын
So for the Rough Cut to fit a K-26 and still keep pump is metal gears? Hmmm lucky I'm in manufacturing because they Rough Cut is my favorite blaster
@rezaleon7453
7 жыл бұрын
you can modify your sledgfire to be more powerful buy nipping off the dart posts of the shells and taking out those spike things in the plunger tube. you can disassemble it and take those out making it stringer
@NORAMA01
4 жыл бұрын
CAN IT TAKE A SLEDGEFIRE SPRING?
@Louix.x18
3 жыл бұрын
What spring did you use for the barrel break? Please let me know because I'm going to mod my barrel break thank you
@CaptainXavier
3 жыл бұрын
Sadly, I have no idea, this was years ago and it was a random spring from my spring bin.
@Louix.x18
3 жыл бұрын
@@CaptainXavier okay thanks for replying then love your videos btw
@zacgroszman3509
7 жыл бұрын
Hi chaylo, will the C-836 spring work well in a nitefinder?
@CaptainXavier
7 жыл бұрын
I have no idea...possibly? It might be too long. #55 works though.
@LightningEagle14
7 жыл бұрын
holy crap! your at 23k subs already! congrats man. your growing fast.
@rzrider683
7 жыл бұрын
So, I bought a blaster parts sledgefire spring, and it broke the sledgefire immediately. Do you think you could do the thing you did to your pull back roughcut to a sledgefire and put the blaster parts spring in?
@CaptainXavier
7 жыл бұрын
Maybe? I would have to take another look at the mechanism.
@noahvillegas7779
5 жыл бұрын
I'm new to modding, but if i replaced the gears for metal ones, would it work? Or would the rails still be the problem? Edit: wording.
@CaptainXavier
5 жыл бұрын
If you come up with metal gears...let me know. I'd love to have some.
@tocone-o1372
6 жыл бұрын
Did you have to cut the c-836 to make them fit? Is there a trick to make everything stay together before putting the inner white cover on? Thanks for all the help.
@CaptainXavier
6 жыл бұрын
Nope, no cutting. It is a PAIN to get back in...
@tocone-o1372
6 жыл бұрын
Yes it is! Glad I asked, I'll give it another go. Thanks again.
@tocone-o1372
6 жыл бұрын
Had to use a little zip tie to compress the spring but, I got it put back in one piece. Thanks.
@robarmour5368
6 жыл бұрын
MakeTestBattle singled a Sledgefire and got over 200fps shots out of it, and it still can reload with the break action
@l.benjamind.9003
7 жыл бұрын
that second roughcut, do you think it might be able to take a K26 with the pump if you make the priming rod external?
@CaptainXavier
7 жыл бұрын
I doubt it because of the angle. It might be possible and I will try it though.
@DrolthKar
3 жыл бұрын
Snagged a barrel break from a local salvo thinking of re working the barrels to fire rival rounds any tips or ideas on steps to take?
@shray4488
5 жыл бұрын
Extremely late, but im looking to upgrade meh sledgefire so how much longer should the k26 be?
@CaptainXavier
5 жыл бұрын
As long as possible.
@shray4488
5 жыл бұрын
Thanks cap
@blankettoys8533
4 жыл бұрын
Do you know what FPS does a singled sledgefire with a k26 or just a sledgefire with one dart in its shell or a one dart 3D printed shell?
@CaptainXavier
4 жыл бұрын
nope
@yohanzo
5 жыл бұрын
Thanks for this! My sledgefire will be receiving a longer k26! Muhaha...
@hanktheguy3237
7 жыл бұрын
10:09 me every time i dismantle a gun
@dr.jex___
7 жыл бұрын
lol
@eomersimbajon2938
7 жыл бұрын
That's a monster cat logo, isn't it?
@acethepanther2153
6 жыл бұрын
I take that gun apart evry day when i bored
@1nsane860
7 жыл бұрын
is it strange that I am jealous of your spring collection?
@benjamin8558
7 жыл бұрын
Insane0 Juggalo no
@just-there
Жыл бұрын
Who isn’t jealous of his collection
@betelgeuse4a
5 жыл бұрын
wow. did'nt expect roughcut would be so empty.
@sirspookay8676
3 жыл бұрын
Almost as empty as me Wow such edgy
@Bomberninja
3 жыл бұрын
What spring did you use to upgrade the barrel break?
@CaptainXavier
3 жыл бұрын
No idea. A pair of random springs from the bin.
@spyv6603
4 жыл бұрын
In the hall of the mountain king music😂👍👌
@babicuddlewuddles3097
4 жыл бұрын
What is the strongest spring a roughcut can take with pump action?
@karisasani7006
7 жыл бұрын
So effectively the sledgefire spring is like k25
@CAIDENROX
2 жыл бұрын
My only ever rough cut (Australian) I left stock and the gear train broke. Never bought another. My first ever blaster was an Air Zone Triple Shot. It was green and orange.
@connorshoemaker2466
7 жыл бұрын
On the rough cut 2x4 you can pull the trigger slightly and fire one bullet then pull the trigger all the way and shoot again without priming again
@aes2630
7 жыл бұрын
Regarding the Rough Cut what if you kept the pump grip and had an external connection to your rear priming bar. This would make the blaster easier to prime, allowing you to put more power.
@Jk8Z
6 жыл бұрын
I wonder if it would be possible to make metal internals for the Roughcut, that might make it sturdy enough?
@CaptainXavier
6 жыл бұрын
It would.
@crazygamer2458
7 жыл бұрын
Do you think a full aluminum kit for the rough cut would enable it to take 2x k26 with the pump grip?
@CaptainXavier
7 жыл бұрын
Probably.
@creaturedanaaaaa
7 жыл бұрын
90% sure here
@andreveyna7642
5 жыл бұрын
most likely
@patrickrandall883
7 жыл бұрын
What do you use for your handle wraps and how do you do it? They look really nice.
@CaptainXavier
7 жыл бұрын
+Patrick Randall black athletic tape.
@patrickrandall883
7 жыл бұрын
Captain Xavier Oh, cool!
@matthewbro3
7 жыл бұрын
Would it be possible to bypass the gear system by replacing it with a solid bar? It seems to actually shorten the draw from the prime, so it is sort of redundant. While doing this would make for a shorter and arguably less satisfying prime, and probably lose slamfire, but it seems like it could work.
@CaptainXavier
7 жыл бұрын
Probably? I certainly plan to try it.
@aeternumthrowaway5402
7 жыл бұрын
I am working on a stryfe build which I am very confused about. How many trustfires can I put in it before it burns out? This is stock, but I am waiting for some Johnsons 130s which I'll replace the stock motors with. (Can't find Rhinos anywhere so I'm going with some Off-brand stuff)
@landonleverett3224
7 жыл бұрын
PreciousPvP Hypixel gaming mine died after six Ionfires
@ryanborchert8389
6 жыл бұрын
don't mind me Captain, I'm just here to listen to the background music you used for this video. I love Edvard Grieg, in the hall of the Mountain King is a classic!
@jacobyoder2181
4 жыл бұрын
K26 too small? Absolutely unheard of
@fe_busdesto8934
7 жыл бұрын
Where do you get all your springs and how do you have so many.
@williammaple8857
7 жыл бұрын
The sledge fire probably has that strong of a spring so it can fire all 3 at decent range. I bet if the spring was like the rough cuts spring the darts would go like 25 ft.
@dmdizzy
7 жыл бұрын
That ring-prime Roughcut took me way off-guard.
@dylanwight5764
7 жыл бұрын
If you're interested in another Lanard blaster, give the Speedloader a shot. Or rather, the Banshee Beat 2013 re-skin. It has updated internals. I can tell you right away that yes, it can indeed take K26, and it needs it with that traditional terrible barrel length
@alexfelice4676
7 жыл бұрын
please do the deploy, we all know that it sucked, but with a k26 spring it would be much better, like if you agree!
@CaptainXavier
7 жыл бұрын
+Happy Burger I already did the Deploy...
@Glenn-kc5eu
4 жыл бұрын
No wonder the sledgefire is a beast stock especially if you get the 3rd party single shot shells or brass shells Ive gotten my sledgefire shooting crazy hard by just changing the shells and using stefans
@dr.jex___
7 жыл бұрын
Because there are so many barrels which means a lot of brass, people use to re-barrel the Tripleshot with Crayola makers.Also, I am currently building a video about a shotgun pistol.
@Merkkc
7 жыл бұрын
on episode 26 of can it take a k26, do a special blaster or something
@stainlesssteelruler143
5 жыл бұрын
yea, i think he should do a flywheel.
@fizz4023
5 жыл бұрын
A few years to late buddy
@xtout
5 жыл бұрын
Stainless Steel Ruler what
@betelgeuse4a
4 жыл бұрын
@@stainlesssteelruler143 but... Definitionaly, flywheelers can't even use a K26. They use the spinning of the flywheels to pull/push (no giggity jokes plz lol) the dart out of the magazine.
@stainlesssteelruler143
4 жыл бұрын
@@betelgeuse4a it was a joke. To everyone in this thread in fact, it was a joke for god sake.
@roll4critgaming841
7 жыл бұрын
Will you be doing a rifle episode? I am curious to know what the centurion can take.
@monkey---hz3kc
6 жыл бұрын
Well were did u find that double berral break at and I will try to find it
@turtlemanturtle5664
7 жыл бұрын
I am still waiting for him to scream CAN IT TAKE A K26
@justinfowler4539
7 жыл бұрын
thank you for doing the rough cut
@CaptainXavier
7 жыл бұрын
You are welcome
@eomersimbajon2938
7 жыл бұрын
The rough cut is sooo perfect for a reaper cosplay....
@ClassicRedEye
7 жыл бұрын
@captian Xavier , would you post a picture of the internals of your rough cut, earlier my pump snapped off and want to do the rod prime.
@slimebuck
7 жыл бұрын
hope you had a good birthday man! Will we see a few integration videos from that goodwill hunt?? Frankenstein a few together!
@lumengod
7 жыл бұрын
Wow you weren't kidding about shotguns already on the list hehehe. Great video. Another suggestion would be Bows or crossbows
@CaptainXavier
7 жыл бұрын
They are also on the list...although many do not have springs...so we'll see if I can find enough that do...
@lumengod
7 жыл бұрын
Captain Xavier yeah I'm just thinking of the mag fed or spring types, good luck and keep up the amazing content
@toro_rosso
7 жыл бұрын
The reason the sledgefire has such a powerful spring already is because it has to fire 3 projectiles which requires more power
@thefandomconnoisseur8518
7 жыл бұрын
i think aluminium barrels mite fit better than brass or PETG for the tripple shot. i saw rob from Southern brisbane nerf club use them to keep darts in a smart AR for the crossfirebow i dnt think he even put the stock barrels through a drill
@drachenklaue07
7 жыл бұрын
Roughcut with a direct pump Prime without the gears could work, with a shorter prime stroke. Maybe you could retain all the functionality still?
@joeofdoom
7 жыл бұрын
Have you ever made any USCM armour before or something similar? I know you do metalwork and I think the actual props were made of aluminium I really want a set but would like to know how difficult it would be to do before I go off buying materials.
@CaptainXavier
7 жыл бұрын
I have not...but I want to.
@joeofdoom
7 жыл бұрын
I'm sure with your experience it wouldnt be too difficult I might have a harder time but I think it will be easier and cheaper to do it in metal than messing around with fibreglass and bondo. I think playing nerf in it would be absurdly fun.
@themadquacker1462
7 жыл бұрын
I made a seldgefire build for my friend with one of those springs. It works super well.
@number01dude99
7 жыл бұрын
how much would it cost me if you modded a rapidstrike with 3 180's and full rewire and a xt60 connector if i sent you the blaster
@pcornelissen
7 жыл бұрын
make the triple shot use absolver because the biggest problem is the seal between the barrel and the gun. i used the spring of the triple shot in the single shot brother of the triple shot (the lanard sawed off hand cannon) witch standard has a better seal but a crappie spring witch becomes a beast with the triple shot spring
@mattvonnerf3495
6 жыл бұрын
Out of my arsenal I'[m surprised that I've never even fired, let alone owned a Nerf Shotgun, which, of course means I want one. I don't have a Nerf Sniper Rifle either, but that's kind of an oxymoron. But I wouldn't mind a direct prime kit in a Longstrike. Anyhoooo... Do you have any recomendations for a Nerf Mega or "Elite" type Shotgun? (I like the look of the Roughcut 2x4) Something I can mod, but has reasonable to good stock performance and reasonably simple mod upgrades (I do tend to leave AR's in, as I don't want to dry fire if I can help it, but sometimes it happens and I don't want to damage my plunger rod/head/tube assembly). Thanks again for another great video!
@CaptainXavier
6 жыл бұрын
I recommend the Roughcut or the TwinShock.
@mattvonnerf3495
6 жыл бұрын
Cheers, I think I'll go for the Roughcut. Got my first video recorded, needs editing but will be live soon!
@shadowsa2b
6 жыл бұрын
i didnt know the Rough Cut had a Zombie Strike release. i had to look that one up. at first i thought you were referring to the Brainsaw, which is similar, but not exactly the same. (duh)
@l.benjamind.9003
7 жыл бұрын
Do you think that you could put a K26 in the triple shot if you replaced the plunger rod with a metal one?
@CaptainXavier
7 жыл бұрын
Probably. But it would be much easier to just find a spring that fits.
@patrickrandall883
7 жыл бұрын
I still think you should upgrade your wrist raider in the form of a full auto Stryfe wired to a remote trigger put on your glove. OR You should make a molle rig that has a Titan tank and an upgraded electric pump, also attached to your glove. It could have a tube running to an absolver mounted on your spare shoulder.
@Sbomb16
5 жыл бұрын
Little late to the party, but is it worth it to take out the AR's from the sledgefire? Assuming I only want to shoot all 3 darts out of it
@CaptainXavier
5 жыл бұрын
Not really.
@BreakYourMark
7 жыл бұрын
Hay just thought i was let you know the progress of the package i sent you, it left Maryland the day after it was supposed to arrive in Washington, and is currently still in transit to Washington, it will be there… eventually I guess
@muddy_armadillo
7 жыл бұрын
Capn, you can remove the bottom ARs and still have it work.
@fr1695
7 жыл бұрын
Have you considered making a couple of sledgfire shells that are singled I heard they soot nice and fare
@creaturedanaaaaa
7 жыл бұрын
yeah the make test battle one shoots crazy far
@Slender_Man_186
7 жыл бұрын
Could you possibly make your modded rough cut front pump by connecting a standard pump to that back prime?
@Blight_750
5 жыл бұрын
Did you do a mod guide on the rear prime of the roughcut ? And the lanard triple shot can take all types of longshot springs and indeed catch especially with the strongest version of longshot springs
@CaptainXavier
5 жыл бұрын
I think so?
@Amiga3000D
7 жыл бұрын
Great episode. How about trying a K26 in the Alphahawk?
@CaptainXavier
7 жыл бұрын
I will...if I ever get one... :(
@somehoweverynameiwantistak5535
7 жыл бұрын
I ordered some of those c86 things and it gave me a pack of like 10 total springs I think i just ordered two though :P
@nathanhayward1215
7 жыл бұрын
Roughly how much would a hammer shot with a 8round cylinder and spring mod with paint
Пікірлер: 599