Great video! I remember tearing one of those down to the bare crankshaft, I want to say in 1985, tons of parts in that model.
@MachineryNation
Жыл бұрын
Yeah, I was please there was not a lot wrong with it 😂
@patrickvennard838
Жыл бұрын
A Husqvarna 50 was my first saw great video.
@7eis
Жыл бұрын
The threaded carb tool is probably to pull the limiters out of epa/emissions carbs
@simonsays5722
Жыл бұрын
one of the first saws i ever serviced ☺👌
@MachineryNation
Жыл бұрын
Awesome, thank you Simon 👍🏼
@Tinituzzer
5 ай бұрын
Sold mine many years ago..great saw...today I use bävling.
@gasbri6995
7 ай бұрын
I have an old 50 rancher from my grandpa i wanted to restore so ty for the video it will help me :)
@garrettnelson1642
Жыл бұрын
Great video James! I can't stand working on recoil springs. Always great seeing an old saw be brought back to life!
@MachineryNation
Жыл бұрын
You and me both, thanks Garrett 👍🏼
@tgsgardenmaintenance4627
Жыл бұрын
I have the 2019 455 Rancher, and although it's not the best at anything, it's great at everything!
@MachineryNation
Жыл бұрын
That is a great way to put it 😂 powerful saw but heavy for its size 👍🏼
@tgsgardenmaintenance4627
Жыл бұрын
@@MachineryNation. I actually love the weight, let the saw do the work, that's what I bought it for!
@Tinituzzer
5 ай бұрын
Standard 50 dont look that if we come to 1987..
@tinkeringtaylor3053
Жыл бұрын
Great job James, runs and sound great, i think it was 10 pulls to start it 👍
@SuperDiscovery95
Жыл бұрын
Great video, makes me want to get my 50 rancher out and try it.
@MachineryNation
Жыл бұрын
You should! Thanks James 👍🏼
@chevyman7293
Жыл бұрын
I'd love to see more videos just like this. Nicely done james amd crew
@arthurtory3644
6 ай бұрын
Trying to do something very similar with a rip off rancher 50 I have had to replace all the fuel lines as they have dried up and feul wasn't getting into the enguine it's called a pirama 580
@RinoRinguette
5 ай бұрын
salut jai une question car j'en ai une qui est en parfait état avec bar et chaine neuve ,pour le prix ca vaut quoi a peu près aujourd'hui une Rancher 50 de la meme année ?
@easingrapod1274
Жыл бұрын
Hi. Are the husqvarna 55 cylinder and crankshaft compatible with the husqvarna 50 rancher?
@JakePlisskin12
7 ай бұрын
hemostates, the tool docs use. maybe
@Big_Johns
Жыл бұрын
Nice work James, watch out for that Chinesey Stuff. 🤣
@smallenginerestoration9329
Жыл бұрын
Would u sell that husqvarna 50
@Davo996
Жыл бұрын
How not to fix chainsaws 😂😂 Buy an air compressor. Use it to clean your saws and bar oilers out. Buy some gloves so you don’t cut your fingers on the bar. Only an Englishman can re-invent the wheel…..
@MachineryNation
Жыл бұрын
English and proud sir 👍🏼
@leonardobatistarocha7956
Жыл бұрын
caipira chico lobo composição: chico lobo viola quando a noite desce se vem lua cheia traz cantoria vadia estrela menina fonte de amor e de alegria por isso eu sou cantador violeiro no sertão canto as tristezas da terra mas também a força desse chão depois de enxada no campo é viola na mão sou caboclo que ao romper do dia vai pro roçado na hora da lida mulher cuida do café e de rosinha a mais pequenininha por isso eu sou plantador colho os frutos do meu chão em troca ofereço suor mas recebo com juros o pão depois de enxada no campo é viola na mão sob o sol sou matuto da roça sob a lua eu canto de viola foi assim que me fiz caipira sobre as bênçãos de nossa senhora sob o sol sou matuto da roça sob a lua eu canto de viola foi assim que me fiz caipira sobre as bênçãos de nossa senhora e depois de enxada no campo é chegado a hora da minha viola
@exploringwithdonald8444
Жыл бұрын
I was givin one of these and it won't start
@almclean4835
Жыл бұрын
Just finished watching, told you it would run. It’s a Husqvarna! 🖕right back at you rude boy 😁
@MachineryNation
Жыл бұрын
Haha, thanks Al 🤩😂
@blueyhanson6253
3 ай бұрын
Thanks for sharing. I inherited one from my late father and I believe it is a slightly earlier version of the Ranger 50. It's all orange and was very dirty, but after a good clean and service it ran beautifully. The freshly sharpened chain cut a decent load of firewood which consisted of very dry Australian hardwood - not a problem it's a Husky.
@wadeholden7380
Жыл бұрын
We didn't see the McCulloch run mate
@MachineryNation
Жыл бұрын
Unfortunately the pain had a really bad reaction so I need to start again on that saw 😭😭
@wadeholden7380
Жыл бұрын
@@MachineryNation oh that's shit mate
@MachineryNation
Жыл бұрын
@@wadeholden7380 yeah, really disappointing. I will sort it at some point. It’s my own fault for not doing it properly.
@wadeholden7380
Жыл бұрын
@@MachineryNation bugger you made me wanna buy one I found a McCulloch Mac 120 top handle saw I wanna buy
@stihlms400cm3
Жыл бұрын
Fabulous Rancher resurrection James, l was rooting for you on the recoil winding wincing syndrome, ( l thought it was only me ), Your Rancher cuts beautifully and sounds Sweet, well done. Love your channel James, always sending positive vibes ❤, also your saw skills rock, looking forward to more great stuff 😊 !!!
@MachineryNation
Жыл бұрын
It’s scary stuff 😂😂 thank you for your support 🤩
@DJC995
Жыл бұрын
Nice One James We had newish Kawasaki hedge trimmer the recoil on that was such a pain it got left for years🤣 think we got a complete assembly in the end Good getting that saw running Thanks again
@MachineryNation
Жыл бұрын
Awe, yeah those Kawasaki ones are a pain as they are so deep! Thanks Darren 👍🏼
@almclean4835
Жыл бұрын
It’ll run
@MachineryNation
Жыл бұрын
I love your optimism 😂😂
@lifeonanestonianfarm4149
Жыл бұрын
I have Husqvarna 345-Oldschool works great about 18 years .... older Husqvara is bulletproof :D
@bryantitus6634
Жыл бұрын
Just a good reliable old firewood saw. Very high quality saws. Definitely better made than modern 'farm and ranch' clamshell saws. Nothing fantastic to run performance wise but not underpowered either.
@ajsimpson7816
Жыл бұрын
Aspen may not go stale but the carb diaphragms still go very hard and when left it does perish the rubbers in the real world but when they sell it you they say it doesn't
@MachineryNation
Жыл бұрын
Interesting, I’ve been selling it for 8 years and never had an issue like that.
@Nukemann64
Жыл бұрын
nice work on getting her running again! Man, there's nothing worse, than messing with a recoil spring. I was working on an old weedeater one time, and this was before i knew anything about the coil springs, and that sucker went swoosh and completely unwound itself and flung all over the place.
Пікірлер: 49