People who save abandoned animals and restore cars, guitars, airplanes, and homes deserve a very special place in heaven.
@belligerentamateur
Жыл бұрын
I'm picking up a rescue German Shepherd puppy this weekend!
@Bw40099
Жыл бұрын
@@belligerentamateur how is the puppy?
@gscgold
Жыл бұрын
Really?
@randymiles904
Жыл бұрын
Yes we do but we get to keep our guitars, cars and animals 😉
@coltondoescars
Жыл бұрын
My ego has never been so stroked. 😂 JK.
@xavierc8383
Жыл бұрын
The guitar turned out amazing, I’d definitely want to see more content like that
@Catywampus_Kerfuffle
Жыл бұрын
A hard yes to more vids like this. This is pretty much the direction I'm heading in. Where, if the neck and body have that feel MOJO, I pick it up and do work on the electronics and hardware myself.
@karenanthony7957
5 ай бұрын
My husband used dowels to pluged bridge holes on this Epy. This had real bad dicast had casting lines so he put all Gibson everything . Thank you.
@LovinMusic1965
Жыл бұрын
I'm 58, and I've never paid more than 600.00 for any guitar, even in the 80s. The Gibson line is way over priced and is priced for labor and not parts. Pots, and wire, and etc are no bearing on tone. I have squires that I've gigged with for over 30 years, and it pays bills. You must know how to set up a neck and pups. I never wanted to sound like anyone and just play songs and I've never been interested in learning every note of solos, but I also play country and most of it came in time with practice. It's cool you do this. It's exactly what anyone can do with time and patience, and education
@jimkostan9932
4 ай бұрын
One Reason why Gibson's are more expensive,is #1 the name, and back in the day they were all handcrafted. Also Gibson did all the research and development, what's less expensive guitars all they had to do is copy it they did not have to invent it. I'm like you, as far as being older also,, I'm 67 now,,started playing in 1967, at age of 10. My first Gibson was a Gibson SG standard P-90s,$149.99. then my next Gibson was a ES -125 that was also under $200. Gibson Les Paul, cost,$285.99. still have my Gibson's but now,, there's so many good Gibson based Guitars like PRS, etc. would you buy cheaper because they did not do the research and development.. now,,,I'm mostly a fender guy..
@pauljohnson3686
4 ай бұрын
Just once in life.. A guitar player should own a gibson les paul.. Even if it is just for a month or two... It may seem like a lot of money but in 5 or 10 years you will still have that money if you decide to sell... Its like a Rolex.. You actually get to own the product for free whilst you own it. On the other hand you can keep it and be proud that you bought what the other guitars can only copy.
@dokkenmokken6278
2 күн бұрын
@@pauljohnson3686 unless the headstock will break like on many of them :D
@pauljohnson3686
2 күн бұрын
@@dokkenmokken6278 If it does... Get it repaired... Life's to short to worry about trivial things like a broken headstock... Just my own opinion.
@ammostockpile
Жыл бұрын
Awesome video, I dig these upgrade videos, because I as well love this part of being a guitar player, by the way those pickups sound incredible!
@belligerentamateur
Жыл бұрын
Thank you!! Glad to hear it!
@tcy5499
Жыл бұрын
First time commenting. Kyle love this kind of content. I've been wanting to get back into guitar restoration. But it's feeling a bit daunting. Your very concise and make this seem not so over whelming. It's amazing the difference u made in thay gorgous epi.
@litos_mendes
Жыл бұрын
ohhhh yes this is a beggining of a great series ... give us more guitar projects
@dlflash56
Жыл бұрын
I did something very similar. I bought one of the Epiphone 1959 Les Paul Standard Electric Guitar's. Like you, I'm not a big fan of the Burstbucker pups, so I bought a set of the Custombucker's from a R9 and slapped those puppies in and polished the top... OMG, what a difference those pups made in tone and the polish just makes the flame top jump out. Basically, because of the specs on this model... I have a R9 at 1/4 of the price of the Gibson equivalent. I absolutely love it and find myself playing it more than I do my Gibson's.
@HANDBALLDIEHARD
Жыл бұрын
AS a retired guitar tech for a major guitar chain i must say Kyle knows his shit ! great choice of parts and where to put the dough !
@retrocny5625
Жыл бұрын
Killer content. Would love to see you do more of these "zero to hero" kind of vlog/build videos. I think content like this would definitely be a huge help in terms of channel growth. A lot of people love shit like this, myself included. I'd rather poke around and find a killer deal on an older guitar that needs a little TLC, then drop $1500+ on something new these days.
@trillrifaxegrindor4411
Жыл бұрын
this has $1500 in it at this point
@dp9550
Жыл бұрын
Sounds Fantastic ! tip on the finish if you wet sand ending with like 2000 grit polishing will be sooo easy.
@danielsaturnino5715
Жыл бұрын
Remember to angle that nut file towards the headstock in the same angle the string would. Makes the string move smoother and allows it to contact all the way on the slot thus not messing up your intonation.
@philipbeasley72
Жыл бұрын
Good job polishing that thing!
@chachib.2706
Жыл бұрын
Might be my favorite sounding guitar that I've seen on the channel, so far. Super articulate and just pissed off sounding. Good work!
@Zoso981
17 күн бұрын
I have a set of the Gibson Custombuckers in my new Epi IBGC 59 Les Paul, best pickups I've ever played. People said that since they aren't wax potted, they would squeal under high-gain, but I'm not getting any of that. They just sound killer. I'm gonna pull them out and put them in my Gibson LP Custom. Great video!
@danielc418
3 ай бұрын
All of your videos are cool, but really enjoyed this one. I’m getting a VOS ‘57 Goldtop and I was in the process of going down a rabbit hole about Custombuckers, when I stumbled on this video, keep up the good work bro!
@D.Guitar
Жыл бұрын
I always luv redoing Guitars. For the last 8 years I've been making Dean ML style Guitars. I typically use Ibanez RG style Guitars for parts. Like necks. Body core pickup routes. Neck pocket position and trem position.. although I set my necks in and use actual Floyd Rose trems. I cut down along each side of the pickup routes. And build layers to build my own 25.5" scale .. 24 fret. ML style Guitars.. I have about 7 of them. Or more? Like 3 or 4 Stealth Style ML Builds too.. so I luv seeing anyone do their own work. Learning to make guitar major reconditioning and modifications a hobby....
@mehmetekici84
Жыл бұрын
Hi Kyle, I never post comments for some reason but this video fired me up. Please make more stuff like this 🙏🏻 It is great to watch someone not that professional doing projects like this. It is encouraging! 💪🏻
@dougulman6700
Жыл бұрын
I put a graphtec rezomax bridge on my e2 and i have been in love with it ever since. I have been surprised that they don't get more love. Nice build Kyle!
@joshmcclure5150
Жыл бұрын
Love to see more content like this!! Maybe as a suggestion if it hasn’t been done already.. speaker swaps and understanding your amp ohms to your speaker cab ohms.
@ronanjohnson8534
Жыл бұрын
I've got one of these as my number 1 rig, awhile back a buddy of mine got a mid 80's sg that was pretty totalled on the neck so he let me strip it for parts, took everything down to the thumb bleeders, has the og gibson pickup in the neck but recently put a jb-4 in the bridge. Absolutely love it!
@Metaldad87
Жыл бұрын
The solderless system would be amazing for me. Not that I'm afraid of soldering but I have a neurological condition called tremors where my hands shake constantly which makes soldering extremely difficult if not impossible
@amandahuginkiss6868
Жыл бұрын
I also have issues with soldering these days, because the eyes aren't what they used to be. Used to do that all day, but not without a lot of magnification these days.
@nastyriffs
Жыл бұрын
That guitar is fucking beautiful. I'm praying for the day they release another line of silverburst LP customs. We never got them here in the UK. My dream guitar is a Gibson, but I'll happily take the Epiphone!
@ajdriscoll7722
5 ай бұрын
Did you see the new Adam jones non art guitars?
@nastyriffs
5 ай бұрын
@@ajdriscoll7722 I did! It looks amazing but it’s out of my budget for the time being. The internet might hate me, but I’d have to install a pick guard on it though 😂
@ToniLovesSkateboarding
6 ай бұрын
yes! basically what I'm looking to do! My neighbor gave me a guitar he was going to donate to Goodwill. its a 1998 Korean made Epiphone LP. turns out its a great guitar! i got it working again, new locking tuners, new pickup switch, new knobs, Seymour Duncan on the bridge. Now I want to finish the whole thing! new electronics (that solderless kit is what I need!) new bridge, nut, and perhaps new pickups (or just a neck pickup to go with the JB) great video!
@doctoribanez
Жыл бұрын
I bought a headless Harley benton . Ended up buy a bunch of different tools .fret files, level beam, nut files. After several hundred dollars and wrecking then replacing things I'm fairly confident I can do whatever now. After all that and finding some used Seymour Duncan's distortion and all new wiring it's still a dump but a hell of a lot better lol
@Alexholbert
Жыл бұрын
Dude I’m so sorry that happened . I have enjoyed watching your channel over the past year and your great attitude is refreshing on KZitem. Hate it for you but they will make things right. Whoever you bought it from.
@Canadianwheelchairguitar
Жыл бұрын
Looks great! I would totally polish the back. I would always change the pickups on an Epiphone, I'm not a fan of them but I do like the Gibson Burst buckers. I think pickups are a personal choice, some people hear & feel the difference others don't. Excellent work!
@NA-xm7wj
Жыл бұрын
Oh my god you were killing me with the nut file. You know nomad has an excellent video on how to setup a les Paul I really hope you watched it But guitar very cool I’ve been wanting to do the same with my les Paul junior from epiphone
@amandahuginkiss6868
Жыл бұрын
Thanks for the video, the idea of using a car polisher hadn't occurred to me. I need to take some scratches off a headstock, that could work. BTW, your soldering iron appears to have a blue sponge (can't quite tell, but at 17:10) on the stand. You don't want to use a wet sponge while soldering. I know, it's how I was taught too, but it cools the iron off and oxidizes it. Get a brass soldering cleaner, looks like a brillo pad, and it will clean off the iron and not cool it down. Unless of course you aren't using a wet sponge, then ignore me!
@randallsimmons1093
Жыл бұрын
Hey Kyle, I see you went to MOJO. My brother is the VP over there. Its a good company. They make some great products. Enjoy the show! Never miss an episode!
@resington
Жыл бұрын
The T shirt is amazing 😅
@belligerentamateur
Жыл бұрын
Right? Chris and JPTR make the best stuff
@che2335
Жыл бұрын
Im loving the Dadarrio Planet Waves tuners the best after getting a set installed already on a used EC401. They cut themselves after u lock and start tuning the string tight. I also own Grover kidney bean lockers and 2 sets Hipshot open gear lockers.
@amandahuginkiss6868
Жыл бұрын
Wanted to mention the Planet Waves as well. I have them on an Epiphone Explorer and they are fabulous. That string cutting feature is the cherry on top.
@brandonjackson5865
Жыл бұрын
That turned out sweet those ratio tuners set that headstock off, but I already kinda like the old epiphone headstock shape on the customs the custom inlay and binding make it look classy and the shape of the ratios knobs or keys look awesome on it It looks good and sounds good. Now I want to find a neglected epiphone LP custom to pimp out.
@129studio8
Жыл бұрын
Definitely wanna see more vids like this!!
@djefferson5669
Жыл бұрын
First time watching your channel. I did not expect that great of a result, nor that impressive of a demo! Thanks for demoing the guitar in more then one way with the direct input sound and then the sound in the room. I wish more people would do that. Subscribed!
@WickedCrispy
Жыл бұрын
0:01 *when you miss the last 3 layway payments*
@Twy7chTec_Vayper
Жыл бұрын
This has to be one of top 3 favorite vids of yours buddy! Just did a restore on a '99 Ibanez AX-7521 Cherry Fudge 7-string, was almost a month of little headaches here and there but that guitar is the best sounding on my rack now lol definitely make more vids like this if you get the chance
@liselottefrejdig1112
11 ай бұрын
I had a Epi LP Standard. I changed pick-up’s to Seymor Duncan P-rails, knobs to Speed knobs and truss rod cover to Les Paul Custom. That’s nice too.
@argento8447
Жыл бұрын
Dude, I swear 9 month ago I did almost the same thing to a semi-hollow Gretsch, same bridge, tuners, nut. The only difference is that i went for BKP P90s. Such a fun project, and now the guitar sounds and feels amazing.
@emersonluz6588
Жыл бұрын
That guitar looks amazing! The only small thing that I would change is the switch tip. I think that a black one, like the original, will fit so much better than this orange one. But still a very hot guitar, dude!
@coreysteady
Жыл бұрын
i always sand down the finish off the back of the neck, feels so smooth
@StuartKReilly
Жыл бұрын
Kyle you did a very good job restoring that Epi. I LOVE seeing videos of folks fixing a guitar that some one "goobered" up. I've got a Kramer tele thats in pieces right now I wanna fix up one day and hopefully I'll get the money and time to.
@jeffh_77
Жыл бұрын
Looks and sounds killer! Would definitely dig a series like this
@m3m3sis
Жыл бұрын
Guitar Mods and Upgrades are what excites me. There's too many ppl arguing over tone, mixing and amps already.
@florisvanlingen
Жыл бұрын
17:00 just a little tip. Use some S-39 or Flux and fresh solder when trying to reheat an old solder joint. This helps to bring oxigen into the reaction which helps. The potentiometer is quitte good at dissipating the heat and it can withstand quitte high temperatures before your solder melts when using just the iron.
@bryang.6809
Жыл бұрын
Nice work Kyle looks great love the silver burst and sounds awesome!!
@littlerhodyguitar2169
Жыл бұрын
Cool video glad it worked out with what you had to work with.
@stratolestele7611
4 ай бұрын
Edit - Forgot to say "great job!". It turned out fantastic. I have several nice Les Pauls (Gibsons), but I've always wanted a Custom - just to look at! Lol I just didn't need another Les Paul, let alone what the Customs cost these days. So, I got both a black and white Epis. I ended up liking the white better and sent the black one back. I played it a few times, but it was pretty unremarkable (I couldn't stand it actually), so it just hung on the wall looking pretty. Decided one day that I was going to see about making it a player and dropped in the SD Hot-Rodded set (jazz and JB), all-new electronics, including push pull pots for coil splitting, had my tech give it a stellar setup, oh and swapped the bridge for a Gotoh (I'm a fan) and man, the transformation was incredible. I mean, they have legit ebony fretboards! Great overall platform ripe for modding. No, it still doesn't have the same feel as my Gibsons, but I won't hesitate to gig it.
@s.e.n3264
Жыл бұрын
Yea I know exactly what you're talking about..... Pickups do matter! And yes, I'd love to see a video of you putting that bridge on.
@rhyswilliams4893
Жыл бұрын
I've got an Epi SG with all Gibson hardware on it. It's an absolute demon. Only cost me around 500 all the hardware came for free when a guitarist smashed his guitar on stage and signed it and gave it too me.
@dokkenmokken6278
2 күн бұрын
Nice job reviving the guitar! Looks and sounds awesome! The only thing I'd suggest is to change the switch tip. To me looks like sore thumb :D And the drill bit in the pickup was hilarious and sad in the same time... but wit Gibson products nowadays I don't think it's surprising...
@shawnlennon1947
Жыл бұрын
a wall of sweet amps stacked so high you can just barely reach the top controls. I like you Kyle. living the dream.
@Dudesbrewsguitarreviews
Жыл бұрын
My wife giggled every time you said 🥜 😂 she’s like what are you listening too😂
@vincentrandles8105
Жыл бұрын
Sweetwater is the shiznit! The last purchase I made with them was a bag of picks. Afterwards they call, (like always) to see if I'm happy, or if there's anything they can do....FOR A BAG OF PICKS PEOPLE! A BAG OF PICKS....Yeah!
@EmmanuelAguilar
Жыл бұрын
the sound is awesome!!
@jasons.3921
Жыл бұрын
Hey Kyle, what a great journey you took us on with this video. The guitar was definitely worth putting some time and money into. It turned out really good. Thanks for putting the time into making this for the channel. Keep up the excellent work! Look forward to seeing more cool videos from ya. Cheers from Texas.
@markseverson3358
Жыл бұрын
Have an epi. L.p. 100 lefty ... worked on it .plays way above it's pay grade! It's hard to find Lefty's for a good deal so it was a score. Cool video bro,subd.
@lucaswilkinson6441
Жыл бұрын
That's such a sick lookin guitar! I've recently decided to start trying to do my own setups, mods, etc. and it's videos like this that make it seem alot easier to jump into when you're not super handy or mechanically inclined. thanks!
@Jarrodpimental
Жыл бұрын
I buffed the flat finish on a prophecy to gloss and it made the guitar look 100x better. I had to sand it like this to do that.
@SLAMDALORIAN
Жыл бұрын
This video was awesome. Love that guitar!
@zachbaker1376
14 күн бұрын
i got the same project. I just bought a (April 2024 made) Epiphone SG limited edition Special 1 in cherry. Not a fan of the bridge setup but time will tell. All i have done is put some slinkys on and ordered some black chrome grover tuners.
@ast3663
Жыл бұрын
24:40 ..whe you saw the strring slots, dont forget to angle it down and into the direction of the actual string..
@richkurtz9661
Жыл бұрын
Great work brotha. I am really gonna have to get me one of those mojo tone harnesses. I don't solder very well. I do enough to get by, but yeah, that harness is the berries man.
@gregmize01
Жыл бұрын
GREAT JOB ON THE POLISHING!
@andrewbecker3700
Жыл бұрын
The biggest reason an Epiphone Les Paul, (all other specs being equal) will generally sound a tad darker, is the pickup placement. Measure the distance between the bobbins and saddles on both a Gibson and Epiphone. You'll see for yourself. The Gibson's bridge pickup is closer.
@SoonAfterOfficial
Жыл бұрын
Josh middleton also rocked a silverburst ESP for a long time, so it all came together! Great guitar, great video, great playing, loved everything about this
@Factory_Muff
Жыл бұрын
Kyle, you my friend, are a genius!
@finaljesus
Жыл бұрын
hey Kyle about 3 years ago i bought a guitar it’s a copy a very well made copy of a les paul and i didn’t realize that the mojotone wireless harness came with this guitar i was always wondering why it would always sound so good like your guitars this one has become kind of my favorite it has a big neck no inlays an ebony fretboard which i love it’s all black in color with white binding and most of all it’s heavy i love them heavy thank you for your video of the upgrades for your epiphone
@MeTuLHeD
Жыл бұрын
The guitar looks AND sounds killer! I cannot believe you did all that work and didn't bother to polish the back!
@belligerentamateur
Жыл бұрын
Don't care about the back
@MeTuLHeD
Жыл бұрын
@@belligerentamateur Gotcha. I'm WAY too OCD for that. :D
@smeemusic
Жыл бұрын
I really enjoy project guitars but I avoid them because I don't have the network to move them. Its rare I find a guitar I actually want to keep. But working on and rebuilding stripped down guitars is super fun.
@tatt2guy86
Жыл бұрын
Killer job Kyle, glad you could bring her back from the abyss, love the silverburst finish
@jasonbates2687
Жыл бұрын
I got one of those Mojo Tone LP wiring harnesses for a similar project and couldn't get it to work, I even chatted with a tech rep from the company. He said something was probably unintentionally grounded, it still doesn't work but it is quite possible I am just stupid lol. Keep experimenting with your content, good work.
@MrBikboi
4 ай бұрын
Which compound did you use for polishing? Awesome video Kyle, love your content. You deserve to be up there with the foremost respected and popular guitar KZitemrs.
@belligerentamateur
4 ай бұрын
Just the Meg's Ultimate Compound that you buy at Wal Mart. If I run into something like this again, I will def order something with a little more cut to it
@Gabriel-vj1cf
Жыл бұрын
Sometimes the solder on things has a higher melting point it helps to get some fresh solder on the tip to get at the old solder. Also be liberal with flux.
@Rex-golf_player810
Жыл бұрын
Seeing this guitar in this condition was kinda hilarious to me because i could immediately tell from the headstock that it was one of the "new" 2020-present Epiphones, yet it's so scratched to death lololol
@RedBerylFTW
Жыл бұрын
Bought my orange crush from sweetwater at a killer price months ago. Definitely a good recommendation.
@SuperJiggawhat
Жыл бұрын
That was a fantastic video, and you did a great job on that restoration/upgrade. Please make more videos like this. Very entertaining and knowledgeable stuff. Keep it up 🤘
@iLLuzion1st
Жыл бұрын
I know it is probably impractical but please do some more videos like this in the future please! Love projects like this
@THEItchybruddah
8 ай бұрын
Excellent work and also inspiring!
@Chris-th4im
Жыл бұрын
Loved the video! Subscribed! Awesome channel! Hell yeah you got my vote for more these type of videos. 🤘😎🎸
@nicolaskotseronis
11 ай бұрын
Thanks for sharing your project, I do the same thing, I buy budget guitars and turn them into something that I think looks amazing.
@cursetheserpent
Жыл бұрын
on the pick up subject i whole heartedly agree! for me im a die hard for either Seymour Duncan Black winter sets and the Nazgul Sentient sets
@Brent-Nelson68
Жыл бұрын
Being that I love to work on guitars, probably a little more than playing them, I’d love to see more of this type of video from you. Great job! Looks killer and sounds awesome!
@FeArhsma21
Жыл бұрын
Nice job on that guitar my friend God Bless and have a good one.
@1b2m
11 ай бұрын
FWIW, I made exactly the same experience as you, Epiphones always sound darker to me than Gibsons as well, tamer high-end, flatter, less exciting and less sparkly, less clarity, less bite, just muffled, like a low-pass filter on the output. My guess is they use cheaper and less resonant woods, and maybe their figured tops are rather a thin veneer than a thick maple slab.
@scottwilcox6313
Жыл бұрын
Great video! I modded my shecter with the same bridge and tuners. They are just great. I agree pickups make a huge difference. I put a set of Bare Knuckle polymath in my LP. Sounds killer. They replaced a set of Tim Shaws which where great. But they sound clearer and way more dynamic.
@whatsmyageagain91
Жыл бұрын
Amazing job, this guitar needed some love and you gave it.
@halohat2286
Жыл бұрын
Nice work, killer guitar now.
@K707OR30
Жыл бұрын
Nice job! I’d like to see more of this. I rescued a super neglected 08 MIJ Jackson DK2 with a blue flame maple top last summer and am thrilled with how it turned out. I’m not exaggerating when I say it was DISGUSTING with shit I don’t even want to know what it was, but it cleaned up amazing. Felt great to do because it was in such awful shape and now is being shredded properly after being brought back to its former glory.
@ComedyExpress771
Жыл бұрын
Getting back into music after my gear was stolen in 2021 and I'm choosing an Epiphone Les Paul dream build similar to yours.
@stevewright107
Жыл бұрын
More videos like this. PLEASE!
@markharmon9892
7 ай бұрын
I have tried Faber and I would say the top of the line hardware is ABM who machine everything from solid billet in Germany. The prices are not to bad either.
@theshredder456
Жыл бұрын
Sweetwater is incredible and your videos really affirm that. I've tried to order from them many times to support such a great store and unfortunately can't, being in Canada. We don't have a comparable in Ontario. Also, I have always just wrapped some finer grit sandpaper around the string gauge I want to file the nut slot. Works great for me that way. Those files would be good for blanks though!
@jimmyppunk
Жыл бұрын
Subscribed brother! Only watched 6 minutes in and got sucked right in! I'm the same way with getting budget guitars and making them rip!
@yeti1002
Жыл бұрын
I'm impressed Kyle , 😉 keep up the great demo's. The guitar looks great , good job 😉 more demo's like these .
@MrBikboi
4 ай бұрын
Living in the US and having sweetwater seems fucking amazing man, I'm jelly of that, I'm in Canada and US shipping prices from stores are not fun.
@harrycanyon273
Жыл бұрын
I agree, regardless of what anyone says, I believe pickups can make or break a guitar as well. I've changed many pups in many guitars and have experienced it myself.
@steveeckert8396
Жыл бұрын
You can't beat Faber hardware. I replaced the entire bridge/tailpiece on my Epi LP Custom with Faber. Acoustically it sounds like a Murphy Lab R8
@watahyahknow
Жыл бұрын
the darker sound on the ephiphones might be because they have more mahogany and less of a maple top (its more a maple veneer in their bodies , there basicly more of a gibson sg but dressed up as for getting the deeper scratches out , you could add clearcoat and tread it as a filler building it up and finesand and polish them off , the bit above the switch is full black so could be touched up and some extra clearcoat added , since the paint / colour isnt affected you might be able to get the guitar as new
Пікірлер: 455