Looking for new truck/car mods? Check Out SPELAB bit.ly/Spelab-Oil-Seperator DISCOUNT CODE “PM20” for 20% off your purchase!
@adamboerger408
24 күн бұрын
Great informative video. I agree with all this. My last truck was a 18’ f150 and I had a 3” lift kit, 35”x12.5”x20” mud terrain Nitto tires on a wheel that had -44 offset and I had to rotate front crash bar and trim around inside wheel well but it STILL rubbed when turning really sharply or when the truck was on a slope with mild turns. I now have a 23’ f150 and I’m wanting that same look just now as offroadish so this video helped me decide my options. I think I’ll do a basic 2.5” level and keep the stock wheels(they look better than the 18’ wheels looked) then upgrade tires to a premium branded 35”x12.5”x18” all terrain tire.
@youngmigo9953
5 күн бұрын
2018 f150 platinum with: 35 12.50 r20 Toyo m/t Leveled Bora 1.50 wheel spacers Had to get the spacers cause of the tires slightly rubbing on upper control arm
@jvaldez2706
Жыл бұрын
I have a 2016 f150 lariat and am going with the 2.5” level with the bilstein 6112 with new UCAs. What are your thoughts on fitting 34” tires and with what wheel offset would be best to reduce chance of rubbing?
@ProfessorMikee
Жыл бұрын
on a 2.5 inch level, using stock wheels which are +44 offset i would not go any larger than 35/11.5 or 34/11.5 its not the tires height that wont fit, its the width, since your offset is so positive, the tire cant be that wide or it will rub on your upper control arm, going with 11.5 will be the max width I would go, which is equivalent to 295/65 or 295/60. if you go with after market wheels with more of a negative offset, 34 inch tires would be as much as i would go to have no clearance issues. I also would not go any wider than a 10 wide and no offset more than -18. hope this helps :)
@jvaldez2706
Жыл бұрын
Thank you Mike! Great advise, I’ll definitely take all this into consideration when deciding on wheel and tire set up. Thanks for answering my questions/concerns, I appreciate it greatly.
@Dimka43
9 ай бұрын
I just watched 20 different videos on this F-150 35s the headache of my and honestly it's very frustrating because everyone tells you its fits but every body has to act exmark and miss the most important or have diss on a 3inch level... This is the Best simple video by far!! Thank you! simple and short and and didn't even pretend to be a mechanic and show how u can take weel off... 🤯 But this Mike guy just set in the truck the whole time and made it simple fast and understandible ! Thank you Mike! 👌👍 ..
@baljeetseggzy7746
9 ай бұрын
I got a 2018 f150 with stock rims on 35”nitto ridge graps. I cut the crash bars out and put a level kit and I don’t rub on anything
@youngmigo9953
5 күн бұрын
Not even your upper control arm ?
@baljeetseggzy7746
2 күн бұрын
@@youngmigo9953 you can get the replacements but I have no issues with my 3 inch level spacer. The replacements are good but if u ever want to lift the truck it could cause issues since a lot of lifts rely on the factory control arms
@javierst.martien4232
2 жыл бұрын
Gonna put 33’s on mine leveled 2.5 inches with new wheels like a 20x9 with slightly negative offset
@ProfessorMikee
2 жыл бұрын
That’s a perfect setup!
@Quest4Unknown
Ай бұрын
Yes you can, cut some plastic and done. Edited to say get aftermarket wheels with Negative spacing
@ryanpritchard9350
10 ай бұрын
In the video you say 35x12.50/18R Mickey Thompson Baja Boss AT with a 2.5" level will fit without rubbing or trimming. Is this 100% true? Does anyone have this exact setup and can provide pictures? This is for a 2022 F-150.
@ProfessorMikee
10 ай бұрын
kzitem.info/news/bejne/0a-ar56Pq2Oji20si=s_4UU5C-zjRlIBGT Hope this helps!
@Nate-zy5ce
10 ай бұрын
Useful. Thanks. It's funny. A year ago before I started learning about all this, I wouldn't have understood much about what you said. Now I do. A question at the end. I'd love a Raptor, but my tentative plan is a new F150 Platinum,5.5' bed, loaded, with the Diamondback HD bed cover on the back. I want to level it, had been thinking less level rather than more, say 2" instead of 2 1/2" or even less if possible, but I can go a little higher if needed, and I do want a negative offset, just a little poke, but if a bit more poke, no more than 1", then I would like to add body colored fender flares to align, in effect a little raptorizing of the Platinum appearance. I would like to increase the tire size that comes with it, 33's, 34's, even 35's but that size seems unlikely without serious cutting. I would most likely want an All Terrain tire with the severe winter rating three peak designation since I live in mountainy ski country, though I do drive from sea level to high altitudes, from desert heat to the big winter snow storms, and I would most likely get real snow tires to swap to for winter time. I do more road driving than off, but some of both, but the offroad is more destination oriented rather than the crazy off roading fun of my youth. I currently have Falken Wildpeak AT3W's on my old Jeep and I love them, but the tires I get on the new Platinum could be another potentially. I do like the idea of a bit wider offset, towards that 1" range, and adding the fender flares as long as I could get them without those cosmetic bolts you see, but I definitely would want at least a little offset. In any case, and assuming you even see this, getting the new F150 Platinum later in 2024 most likely, what would you recommend for the height of the level (incl. any extra rear lift if needed), and amount of the offset, and max size of tire, hopefully avoiding any risk at all of rubbing or such?
@calvinripperdan600
Жыл бұрын
What load range are y’all running with the 295 65 20s
@cameronramirez7272
Жыл бұрын
I’m looking to do 35x12.50x18 on 18x9 +12. Will this fitment work with crash bars trimmed?
@ProfessorMikee
Жыл бұрын
If crash bars are cut you can fit it,
@kellyhamby8448
Жыл бұрын
I have a 2020 fx4. doing a 2.5 up front. what size block would you do on the rear. factory is 1.5..
@ProfessorMikee
Жыл бұрын
I would keep my factory block in the back
@jonathangrimes-k2z
Жыл бұрын
I have a 2017 f150 xlt and I want 35/11.5r17. I have 7.5” wide wheels will that 11.5” tire be able to mount on the 7.5” wheel? And will it hit the control arm?
@ProfessorMikee
Жыл бұрын
You’ll be ok on a level
@michaellewis-kx3bu
Ай бұрын
How much of a spacer is okay to not rub ucas
@JW-yj1qx
6 ай бұрын
Lots of great info. Thanks for compiling and sharing all the info
@wedislas
Жыл бұрын
Thanks for the video, I plan to to leveling 3 inch front and 2 back, 2 inch spacers, wondering if I can still fit 35X2.5? any thoughts? going with the stock wheels 20.
@ProfessorMikee
Жыл бұрын
You can not fit 35s on a level with just a spacer unless you do some major trimming
@taponme2472
8 ай бұрын
If your going 35 on a 3in level and then spacers you will deff fit depends on how wide the tires are
@jayykidd
5 ай бұрын
any ideas about how off-roading will affect these clearances?
@ProfessorMikee
5 ай бұрын
It will affect it tremendously depending on how much you are flexing the suspension
@GreysonParis
2 ай бұрын
@@ProfessorMikee how much clearance is needed to preserve off-road performance? I’m torn between a 35x11.5 but I’d go down to 34” if I’d be rubbing out in the wild (given a 2.5 level on a 2021- style wheel well, stock 44 offset )
@boodmeadows9213
Жыл бұрын
Thanks for this video bro!! Helps alot!!
@ProfessorMikee
Жыл бұрын
Glad I could help! Don’t forget to subscribe:)
@victorlani11
Жыл бұрын
I have 2018 F150 lifted on Max trac 4 1/2” kit, not sure which wheel and tire to get, I’m planning TIS 556AB 20 x9 offset is +20, was thinking 20 x10 but comes only on -19 offset, pairing it with Toyo AT3 all terrain 295/65/r20 , will there be any rubbing or scrubbing issues?
@ProfessorMikee
Жыл бұрын
20x9 +20 offset 295/65/20 would be very very close , and might rub, 295/60/20 I would do, if your going -18 your going to want to go with a 33inch, personally I think you should do 295/60/20 20x9 +20 or +1 and you’ll be money setup 💰
@SimulationNationOfficial
Жыл бұрын
What about -44mm offset wheels?
@ProfessorMikee
Жыл бұрын
Definitely not, they will rub badly
@The50Wicky
Жыл бұрын
ive got a 2013 ford f150 im wanting to do stocks and 35x12.50x20 nitto ridge grappler. what size level would i need to clear that or would i need to lift it?
@ProfessorMikee
Жыл бұрын
so you a 2.5 inch level would be tall enough to clear 35s on stock wheels but the stock offset is so positive that your going to rub on your upper control arm with those 12.5 wides, i recommend going with 11.5 to make some room
@The50Wicky
Жыл бұрын
@@ProfessorMikee well my dads giving me his tires. They are like a year old. So you think spacers?
@ProfessorMikee
Жыл бұрын
@@The50Wicky spacers will work but the. You might not be tall enough on the level now. I would say no less than 3 inches
@fabianglr
Жыл бұрын
2021 F150 on 35x12.5x20 NITTO A/T on 20X9 ZERO offset. I was told this would work with 2.5 level. Thoughts?
@ProfessorMikee
Жыл бұрын
35s might rub on the crash bar a little while in full lock, if I were you I’d go with 34s instead to be safe
@fabianglr
Жыл бұрын
@@ProfessorMikee thank you. It's the set up that was recommended to me by the shop that does lifts for dealerships.
@bulldogfit1584
2 ай бұрын
So a 2024 XLT with a 2.5” leveling kit should fit 34.6” at 11.2” wide? 285/65/20
@ProfessorMikee
2 ай бұрын
Correct
@bulldogfit1584
2 ай бұрын
@@ProfessorMikee correction. The leveling kit is 2.25” not 2.5”. Would I still be good?
@cfl96spam
Жыл бұрын
35s on a 17x9 w/ 0mm offset - 2.5 inch level?
@ProfessorMikee
Жыл бұрын
Will rub a bit
@cfl96spam
Жыл бұрын
@@ProfessorMikee Will it require plastic cutting or frame and metal cutting, I have a 2014 limited, the front splitter does not really come close to the tire the mud flaps come closer, I am more concerned about metal and or frame cutting which would probably make me want to go with a 34 or 33
@Tonio_
Жыл бұрын
Have 2818 f-150 thinking about going 35’s on a 26x10” rim with 2.5 leveling kit
@ProfessorMikee
Жыл бұрын
Will not fit on a 2.5 leveling kit it will rub
@Tonio_
Жыл бұрын
@@ProfessorMikee thanks for the info , and responding , I’ll look into it more before I make a final decision.. going to run all terrain tires so that may help , not going over 12 wide rim as well .. thanks again 👍🏽
@lauramilan2136
6 ай бұрын
@ProfessorMikee Hi. First, thanks for the information you shared here. I have a 2017 f150 RWD. Stock suspension, wheel (+44 offset) and no lift. Stock tire is 275/55/20. I would like to install a bigger tire.... Nothing fancy! I was thinking in 33's , maybe 34's , no bigger than that. For example, 275/60/20, 33x11.5 or 33x12.5. My main concern is to rub with the UC. Right now the space between sidewall of the tire and UC is about an inch. Not sure if I will need to also install a set of spacers. Thanks
@poisoned4life249
Жыл бұрын
What size tires do you recommend if I run a 3 inch spacer front and back with new uca for it as well
@ProfessorMikee
Жыл бұрын
Nothing wider than 11.5 on stock wheels, and 12.5 on after market -offset. For length, stock wheels 35s will fit, for after market 34s if your offset is no more than 0, anything more negative then 0 like -12 -18 the 33s would work. Hope this helps!
Hey man tag me In covering raptor wheels and 35/12s
@ProfessorMikee
Жыл бұрын
😎
@jonahbachand6857
Жыл бұрын
Haha found out myself running raptor wheels and 305/70/17s on a 2.5 BDS level no trimming or rubbing
@adamcarroll4092
10 ай бұрын
I am running 295/70/18 34.5 x 11.5 on a 2010 f150 super crew withh a 2.5 level no rubbing but they look small might go up to a 315/70/18 next time
@reesegebers2851
Жыл бұрын
Could I fit a 295/60/20 or 275/65/20 ridge graps on a 2017 F150 with a 2” spacer lift if I add 20x9 Fuel Mavericks with a +14 or +20 offset? Which do you think would be better? Right now I’m just running stock 20s with 275/60/20s and they just don’t have the height to fill out the wheel wells like I’d like.
@ProfessorMikee
Жыл бұрын
+20 offset should be fine for a 34 inch tire! Great set up, may or may not rub slightly at fill crank but that’s about it. Different tires have run bigger or smaller even though they are the same size
@fer-cl5lr
Жыл бұрын
My coworker has that setup on his 2014 F150 4x4 and doesn't rub. Looks good, actually.
@evanmiller1642
6 ай бұрын
I run 295x60x20 on stock will stock with no level. I just trimmed air damm. What about 37s? Let's elevate this topic
@calebrichard5136
7 ай бұрын
I know I’m a little late on this video. But, I have a 2017 F-150 and just installed a RC 2” leveling kit. Looking to get Fuel Rebel 20x9rims with +20 offset. Would love to be able to run 295/65/20 tires, but debating between those and 295/60/20 because I don’t want any rubbing. Wanting to go with the Nitto Ridge Grapplers. Do you think I could run the 295/65/20 without there being any rubbing or needing to trim? Or should I just stick with the 295/60/20? Just don’t want to regret not getting the bigger size. Thanks!
@ProfessorMikee
7 ай бұрын
Your never too late! 295/60/20 would be better since your a little less positive on the offset if you were +44 you could get away with 295/65/20
@kinostrong6724
6 ай бұрын
What about 285/75R18s +34 Offset on the 2020 F-150 ?
@byronneal24
11 ай бұрын
My shop is saying they can't fit a 295/65/20 Nitto Recon tire on a 2 inch level for a 2023 Ford 150 Lariat. They say it will definitely rub. Thoughts?
@ProfessorMikee
11 ай бұрын
Most shops will tell you that, people run that set up all time, shops work on all types of vehicles and aren’t really experts in a certain truck, you will have to try another shop
@gian-lucbrasseur207
10 ай бұрын
I have a 2.5 inch leveling kit on my 2020 f150. Im running -18 mm offset rims and just ordered a set of nitto ridge grapplers 295/65R20. I am expecting a bit of rubbing on the crash bar (i will just trim it back myself, I have an aftermarket front bumper so the crash bars are a bit exposed now) Will update when everything is on.
@keep1treal61
7 ай бұрын
2016 fx4 screw. Can I do 4.5 inch lift keep rake and fit 35s 17in wheels 9in. wide?
@kinostrong6724
6 ай бұрын
Are 285/75R18s Nitto Ridge Grapplers ok? With a 2 inch Level or thas way too close?
So I’m running a 2inch leveling kit on a 2021 f150 4x4 larger and want to get 285 65 20 do you think that’s to big?? I’m getting a lot of it works and it doesn’t but I love the look with this size tire. What do you think? Thanks for the info!!
@ProfessorMikee
3 ай бұрын
You are cutting it very close haha, if your on stock wheels you would squeeze by
@reedlishen3946
3 ай бұрын
@@ProfessorMikee I actually ended up going with a 295 60 20 hope it works lol
@jacielbarraza9657
Жыл бұрын
16’ f150 4wd, I want to do a 3in level, with 35s, 12.50 on platinum stocks, you said it would rub on control arms, am I not able to just add a 1/4 - 1/2 wheel spacer to avoid that?
@ProfessorMikee
Жыл бұрын
The only thing is adding a spacer will be too wide of a swing when turning and it could now rub on your crash bars.
@jeffgeesaman4386
Жыл бұрын
Could I fit a 305/60R20 (factory rim) without rubbing/trimming? I think these are 12" wide. You talk a lot about 11.5" and 12.5", but no mention of 12". Thanks, great video.
@ProfessorMikee
Жыл бұрын
Hi Jeff, there’s no such thing as 12, it’s 11.5 or. 12.5 , hope this clears it up for you!
@jeffgeesaman4386
Жыл бұрын
@@ProfessorMikee isn't a 305/60R20 a 12" wide tire?
@ProfessorMikee
Жыл бұрын
@@jeffgeesaman4386 yes but in metric size they don’t make 12 wide
@ProfessorMikee
Жыл бұрын
@@jeffgeesaman4386 305 would rub on the upper control arm
@bulldogfit1584
2 ай бұрын
Is the FX4 have a factory raised ride height? I have an XLT so does this info still hold true?
@ProfessorMikee
2 ай бұрын
Yes they come slightly taller from factory
@DBUSHER7
3 ай бұрын
so on a 2022 with a 2" level im good to on with a 33/12.50/20 in stock wheels correct?
@duccimann9089
25 күн бұрын
I’m running 33x12.50 20’s.. I had some minor rubbing, crash bars are gone and no rubbing! 2 or 2.5 level. 20x9 0 offset wheels
No sir it will rub the control arms. need to go 11.5 to clear on the upper control arm
@yoshikatsu1787
Жыл бұрын
@@ProfessorMikee thank you, that's all I needed to know
@nikocrickmer4157
Жыл бұрын
I’m new to buying wheels. I drive 2018 4x4 sport. I want to buy aftermarket rims and put a level kit in the front. I’m looking for a rim set up for 18’s or 17’s. Is there some dimensions you guys would recommend? Going for a small rim big tire look.
@ProfessorMikee
Жыл бұрын
295/75/18 would look perfect on a 2.5 inch level 🙌🏼
@drewp8773
Жыл бұрын
2018 f-150 i have a 3 inch lift kit do you think i could fit 36s or 37s on stock wheels?
@ProfessorMikee
Жыл бұрын
Won’t fit on a 3 inch lift
@natebeck9918
Жыл бұрын
I have a stock 2016 lariat and am looking to get 35x12.5x17 with a -10mm offset, will a 2.5 level be good for this and prevent rubbing?
@ProfessorMikee
Жыл бұрын
You’ll clear the upper control arm but you won’t clear th crash bars, you’ll have to go more positive on your offset or smaller than a 35
@brettmontgomery1061
6 ай бұрын
I have 35 inch tires with -19 offset wheels. What will I need done?
@ProfessorMikee
6 ай бұрын
Need to go at least 4 inch lift to fit
@Bdurando
11 ай бұрын
I have a slight negative(maybe -6mm) offset but have a 2.5 inch level, I am currently running LT295/55R20 do you think I'd be able to get away with 295/65R20?
@ProfessorMikee
11 ай бұрын
No your offset needs to be more positive
@tyebuck76
6 ай бұрын
Hi.... i have 275/55r20 and rims are 20 x 10 with offset -18 would they fit on a ford with 2.5 level kit?
@ProfessorMikee
5 ай бұрын
-18 might be a little to wide for the level, it might hit the crash bar in full lock granted the tires are smaller it will be very close
@tyebuck76
5 ай бұрын
@@ProfessorMikee thanks I appreciate the reply
@robmfk6987
Жыл бұрын
I'm late to this conversation but would 285 75 18 on factory rims and 2" level work on F150 FX4 without any issues? This tire size is what comes on the Super Duty Tremor
@willbuckner2352
Жыл бұрын
You will be fine my buddy has 33s on a 2 inch level and he only touched the the textured plastic on the bottom of the bumper
@James-by9pl
6 ай бұрын
Can you run a stock 22 which comes stock on my 13 limited?
@ProfessorMikee
6 ай бұрын
Yes
@TrustinThompson
6 ай бұрын
What is you got a 3.5 level kit
@nickrossiter2025
6 ай бұрын
i ordered 295/70/18 ko2s putting on 2019 sport ford f150 with a 2inch level will i rub? or should be good
@abousidi75
6 ай бұрын
No it won't. That's exactly what I'm running
@nickrossiter2025
6 ай бұрын
perfect! thanks hard to find the exact answer online! got a picture?
@nickrossiter2025
6 ай бұрын
stock rims?
@homerh3t
Жыл бұрын
I purchased 35 x 12.5 r20 k02 all terrain for stock wheels put wheel spacer 2” and a 2” leveling but a lot of rubbing. Would like not to trim but I can’t return the tires! Suggestions?
@hunterwarren8618
5 ай бұрын
Trim
@CandyMan69007
5 ай бұрын
I have a 2023 stx f150 with stock 20" rims. What set up should I go with
@ProfessorMikee
5 ай бұрын
Nice can’t go wrong with some 35x11.5x20 on a 2.5 inch level
@CandyMan69007
5 ай бұрын
Ty I like my stock rims they look nice to me. I just don't like the plan looking tires.
@ericbrown7689
Жыл бұрын
I’m looking to do 35x12.5x18 on 18x9 +1. I’m open to trimming plastic and cutting front crash bars, will this work with those mods?
@ProfessorMikee
Жыл бұрын
35s will rub with +1 offset if you don’t cut anything, if go with 34s and you’ll be ok
@DashmeetSingh-n9v
Жыл бұрын
Bro I got leveled AT BF KO2 35/12.5r20 with 20X9, what spacers should be on it?
@ProfessorMikee
Жыл бұрын
You’re going to rub with spacers
@DashmeetSingh-n9v
Жыл бұрын
@@ProfessorMikee it still rubs right now
@RaptorTX915
Жыл бұрын
I have a 2in leveling kit. Can I go for a 295/65/r20?
@ProfessorMikee
Жыл бұрын
On stock wheels yes 👍🏽
@markminton6141
8 ай бұрын
Them alpha Rex give problems? Heard they flicker real bad?
@ProfessorMikee
8 ай бұрын
Been 3 years no problems so far
@markminton6141
8 ай бұрын
@@ProfessorMikee I just seen your b pillars were gloss black I’ve been trying to find some that doesn’t have the keypad did you make yours or buy them?
@connorwhiteside9077
Жыл бұрын
Hey I am seeing some comments and am curious as to what I should do. So I have a 2014 f150 with new tires but I didn’t realize before I got them that they would rub my uca. I now have 35x12.5x20lt (Toyo at3), on a 2.5” leveling kit, should I get a .25” spacer? Or honestly see about swapping my 3 week new tires for their 11.5” width versions? It is only rubbing at max turn, and just very close to the UCA when straight. I appreciate the time and videos, giving you a sub for sure!
@ProfessorMikee
Жыл бұрын
.25 spacer could actually give you the clearance you need for that uca and stop the rubbing
@ProfessorMikee
Жыл бұрын
I would try that before getting a new set of tires
@connorwhiteside9077
11 ай бұрын
Hey so they don’t stop the rub with my UCA so I am debating getting 1.5” or 2” spacers. Should I go with one or the other in your opinion?
@TheKYCamryMaker
Жыл бұрын
Want to run a 35 running 2” level kit. Looking at 20x10 -18 offset. Will this work or will I have to cut? Thanks for all the information!
@ProfessorMikee
Жыл бұрын
Will not fit, you will have to do major cutting to fit that
@kadewhitley
Жыл бұрын
What size spacer do you think would work without chopping studs would a 1” work or would you have to do a 1.5”
@ProfessorMikee
Жыл бұрын
Wheel spacer, or spacer on top of your strut?
@roygarcia5568
Жыл бұрын
What about an R/T 35x12.50x20?
@ProfessorMikee
Жыл бұрын
Will rub on a standard level
@jaydenchandler7206
Жыл бұрын
can i fit it with a level but stock 18 inch wheels?
@ProfessorMikee
Жыл бұрын
yes 35/11.5/18 would be max on a 2.5 inch level
@lifewellloved0204
2 жыл бұрын
Peace ✌🏼
@codylarch1184
11 ай бұрын
If you use a 35 12.5 20 on a 2.5 moto lab level with rear blocks -24 will that rub?
@ProfessorMikee
11 ай бұрын
Yes it will rub up front
@codylarch1184
11 ай бұрын
@@ProfessorMikee what if 33s 12.5 20 on 2.5 level?
@ProfessorMikee
11 ай бұрын
@@codylarch1184 will fit the crash bar but then will rub on UCA
@codylarch1184
11 ай бұрын
@@ProfessorMikee ah a what uca should i need to have work?
@ProfessorMikee
11 ай бұрын
@@codylarch1184 you just need to go more narrow on the tires or go more negative on the offset to clear
@jrlaster5157
Жыл бұрын
what about -18mm offset
@vlad1889
Жыл бұрын
No, with -18mm you should not go past 33 inch tire
@connorbarnett7494
2 жыл бұрын
Isn’t it different if you have a 2wd f150
@jmr8835
2 жыл бұрын
Yes. 2wd stock trucks are lower than 4wd stock trucks.
@connorbarnett7494
2 жыл бұрын
@@jmr8835 thought so
@Thalor
7 ай бұрын
Hey boss thinking about switching up to 35/12.5r20 with a new 2.5 level on my 20x10 -12 rims do you think they will clear?
@ProfessorMikee
7 ай бұрын
Hey! -12 is not going to clear it’s going to rub on the front crash bars, I would go with a smaller tire, or your going to have to do some major trimming
Пікірлер: 162