Check out my other automotive videos kzitem.info/door/PLzSsPTshBX00Uhtp5QFaDC6sJKubL7BtM
@joeg.1119
4 жыл бұрын
It longest the key fob it's programmable to 315 megahertz you shouldn't be having problems to program the key fobs even the switch blade type key fobs.
@PNWBigDubz
4 жыл бұрын
K thanks
@dashtyATG
3 жыл бұрын
@@joeg.1119 Still don't work
@steveleszcynski1245
4 жыл бұрын
I suggest that in a future video, you emphasize, progammig multiple FOBS with key programming first before programming the remote buttons. Great video, many thanks, guidance was excellent!! My experience was 100%!
@Hindsight101
4 жыл бұрын
Thanks for the suggestion and thanks for watching
@masterblaster2765
Жыл бұрын
Wait, he didn't say to do ignition before remote buttons. I have 2 new keys and I did the remote buttons first and they worked fine but now the ignitioins on the new keys aren't programming. Could it be because the order of programming was switched. If so, any way to wipe the new keys and start over?
@masterblaster2765
Жыл бұрын
@@Hindsight101 Wait, he didn't say to do ignition before remote buttons. I have 2 new keys and I did the remote buttons first and they worked fine but now the ignitioins on the new keys aren't programming. Could it be because the order of programming was switched. If so, any way to wipe the new keys and start over?
@Hindsight101
Жыл бұрын
I'm not sure
@robertwren2289
2 жыл бұрын
Thank you! You explained being able to use the remote start if you only have one key.
@Hindsight101
2 жыл бұрын
You're welcome
@SA-mr4br
Жыл бұрын
This was very helpful! I bought my two keys on Amazon (on which work great so far) for under 30$. The dealership wanted to charge me $300 just for one key! Along with programming. I did it all myself thanks to your video.
@Hindsight101
Жыл бұрын
You're welcome!
@dalegill3939
5 жыл бұрын
Follow up. I was able to complete the programming on my 2011 Mustang using additional steps. Thx
@Hindsight101
5 жыл бұрын
Awesome glad to hear
@GosWardHen98
2 ай бұрын
Great info, Derrick. Clear, concise, and informative. Thanks 😅
@Hindsight101
2 ай бұрын
Glad it was helpful!
@Big7jr
6 ай бұрын
Thanks Man! It worked for me programing an extra key with only one admin key and the push start key. It saves me a lot of $$$ 🙌🏻
@Hindsight101
6 ай бұрын
You're welcome!
@michfinn230
Жыл бұрын
The remote start was the trick, worked great thanks for the two key function. E-bay special 12.99 Tax got the car started with the new one but it shows invalid key code on the display lol!
@Hindsight101
Жыл бұрын
Odd
@JohnNocito-os2cj
6 күн бұрын
I have a working key for my Ford pick up truck, but the remote buttons do not work. Can I still program a new key the same way? And the key that the remote buttons are not working, does crank the vehicle up.
@tonyneises5195
Ай бұрын
Awesome content...thanks so much for the clarity!!!!!
@Hindsight101
Ай бұрын
@@tonyneises5195 My pleasure! Happy to help
@SkywatcherSandra
3 жыл бұрын
Appreciate your helpful information and videos. You helped me out when, after having to change my keys batteries, it had to be reprogrammed. Ty again, Happy New Year
@Hindsight101
3 жыл бұрын
Thank you and Happy New Year as well
@leonardredmond1678
Жыл бұрын
Thank you so much ,lost my spare key on my Mercury Grand Marquis which has a remote starter that acted like a spare key like you said in your video,which let me program another key on my first try because i had another key.I thought i was done until you let us know a remote starter acts like a key
@Hindsight101
Жыл бұрын
Welcome
@malikgarrett2036
8 ай бұрын
Worked for me. I had 2 original keys. I have 2006ford f150
@Hindsight101
8 ай бұрын
awesome
@leonardjohnson7998
3 жыл бұрын
Very helpful video.
@Hindsight101
3 жыл бұрын
You are welcome thanks for watching
@patricknegro5071
4 жыл бұрын
Seems like these Car locksmiths know their craft.I was about to order an OBD2 key programmer but I took the third key to locksmith here in Chicago.Cost me $75.The OBD2 device would have cost me about the same but the locksmith did it with his OBD2 device.He didn’t explain to me why your method did not work. You’re video is great though.People have to get informed.He was finished in about five minutes.Lol
@Hindsight101
4 жыл бұрын
Patrick Negro glad it worked out in the end for you
@meshondac2816
14 күн бұрын
Question please. I have a 2011 Ford Explorer with two working keys that start the car, but the keys (lock/unlock) buttons on the fob do not work on both keys. Will I still be able to program the key as well the fob functions to the two new keys? Thanks in advance for your response.
@Hindsight101
12 күн бұрын
Yes, you should have no problem
@meshondac2816
7 күн бұрын
@@Hindsight101 Thank you!
@animashkatenshi9836
9 ай бұрын
I have two master key fobs that start the car, but one stopped locking and unlocking the door.what to do?
@Hindsight101
9 ай бұрын
Make another backup then try to program the not working fob
@vicwilliamson5014
7 ай бұрын
I have a 2007 Ford Escape. The internet says I need 2 working keys. Why? Will using the same good key twice work?
@Hindsight101
7 ай бұрын
Nope, it's a security feature
@LetsDoThisFR
2 жыл бұрын
any ideas on a 2015 ford focus se? I have the new key cut a programmed, but I haven't found how to program the fob section. ty
@dalegill3939
5 жыл бұрын
Hello, my 2011 Mustang gt "will not go into program" mode after accomplishing the 8 off to on steps. Hmm..Any suggestions?
@Hindsight101
4 жыл бұрын
The may be the issue
@richardmcfaul5317
4 жыл бұрын
Help!!! What if I have two keys but the metal part of one broke off and I lost it? Am I screwed and gotta go to the dealership? They are so high priced. Thank you for any information you can provide. I love my little fiesta. 2016 SE. Thank you Thank you. To be clear the metal portion of key which enters the ignition is what I lost. Can I purchase this part?
@Hindsight101
4 жыл бұрын
Unless you have remote start that is an option. Check the notes section for more info on that. But if not you will need to go and get a key made. There maybe cheaper places in your area besides the dealership but that I can't help with.
@goneviral8814
2 жыл бұрын
I have a 2008 Ford escape but I only have the two standalone keys to start the vehicle can I still program the fob remote lock and unlock my vehicle?
@Hindsight101
2 жыл бұрын
Yes
@goneviral8814
2 жыл бұрын
@@Hindsight101 thanks 👍
@ausnetting
Жыл бұрын
Tried this with a 2017 expedition XLT. Hitting the brake doesn’t cancel the remote start.
@CrazyFunnyCats
Жыл бұрын
Thanks so much! 👍 you’re a great guy! Subbed CFC66 🇨🇦
@Hindsight101
Жыл бұрын
Thanks for the sub!
@CrazyFunnyCats
Жыл бұрын
@@Hindsight101 you bet! 👍☕️☕️☕️
@guest1754
2 жыл бұрын
Great content. I just have one problem with my Focus Mk2: I have 3 keys, two of which have immo while the 3rd doesn't. After following your tutorial, I get immo on the 3rd key working, but it's only temporary. If I use the central locking with any of my 3 keys, the immo functionality of my 3rd key is reset. Any tips? I'd really like to avoid dealership since they're charging way more than necessary. Thanks and cheers
@Hindsight101
2 жыл бұрын
Where did you get the keys from? Or are they the original keys?
@chrisstinson3494
Жыл бұрын
Hi Derrick, so I’m gonna use the idea w/ key start to make of for the third key.The question is can I program the buttons w/just the two keys now?
@Hindsight101
Жыл бұрын
I have not done this but you should be able to
@aaronpollack8832
Жыл бұрын
Now for what hopefully isn't a dumb question..... If I change the battery (CR2032) in an existing Ford key fob, will I have to reprogram it?
@Hindsight101
Жыл бұрын
You shouldnt
@dominickortiz5944
4 жыл бұрын
Hello and thank you for the super helpful videos. I have lost all of my car keys to my ford escape, so I do not have any working/programmed keys to being with. Is is still possible to do this method if I buy and cut two new keys from ebay? Seeing if I can avoid that $300 dealership + towing cost.lol
@Hindsight101
4 жыл бұрын
Nope you have to go to the dealership or another company.
@stacyjones1253
Жыл бұрын
It is 735 August 26. I followed instructions to re-sync, my key fob and it locks and unlocks, but the horn part doesn’t beep when you lock the truck
@Hindsight101
Жыл бұрын
Does everything else work?
@anordenpeach
5 ай бұрын
Do you know if programming a new key will allow me to clear the MyKey restrictions on my 2015 Ford F150? One of my two keys broke a while back and I guess it was the admin key - because I mistakenly activated the MyKey restrictions, and now I can't clear them off. Thank you!
@Hindsight101
5 ай бұрын
not sure sorry
@lorenzolopez8297
3 жыл бұрын
Thanks for the 2 videos I watched them both. Very informative. Question though: Are you sure about needing 2 programmed keys in order 2 program additional keys/fobs? I've been needing to do this to get a 2nd key. And I've seen videos with others doing the same thing as you, but with only one key. Just need to make sure before I spend money at the dealer or ruin my one and only current key.
@Hindsight101
3 жыл бұрын
Check out these 2 links: If you only have one key this product might work for you geni.us/gC3JOG (amazon) How To Program A Ford Transponder Chip Key With Only 1 Key and A Remote Start System: kzitem.info/news/bejne/uJerl6d9mpqDh20
@bobh6728
Жыл бұрын
Thanks for the great information. Just seems strange that you have to have 2 working keys. I need a new key because I only have one key. If I had 2 working keys, I wouldn’t need a new one! I guess it’s to prevent dishonest valet parkers, etc. from making duplicates.
@Hindsight101
Жыл бұрын
That is correct. It's a security feature
@jso567
3 жыл бұрын
thanks for the videos i have 2010 f150 and i have two new key fobs and i was able to program them . i followed the steps in your video to program to start my truck but i was not successful what may have i done wrong?
@Hindsight101
3 жыл бұрын
Where did you purchase your key?
@robertwren2289
2 жыл бұрын
By hitting the brake, does the truck still start? I hit the break, but the truck still starts. Will the truck be running when you put in the good key? We tried different scenarios, no luck. If the key does program, will it make the locks move as it programming?
@Hindsight101
2 жыл бұрын
This might help kzitem.info/news/bejne/uJerl6d9mpqDh20
@mikenoll6892
7 ай бұрын
I have two keys that work my ignition only one of them will start the truck.can I program the other key to start truck
@Hindsight101
7 ай бұрын
You have to have two working keys that will start your truck to program a third key
@labyorkauntri5930
3 жыл бұрын
The new key must have a virgin transponder chip with it right?
@Hindsight101
3 жыл бұрын
Great question, I had to look this one up. So it seems that you can use someone else's used key as long as its the right key model for your vehicle. But it may not always work. So your mileage may vary.
@mattspinar3708
Жыл бұрын
I have a question I have two cars and one has one T1 has two keys the card I want to have two keys only has one if I take the ignition out of that one car and put it in the other one Mighty Bob program together car
@Hindsight101
Жыл бұрын
I dont think so
@LCarter-justagirl
Жыл бұрын
Hi! I have two original keys that both used to work and both stopped being able to start the car. I’ve tried changing the batteries on both keys. I get a “system start fault” error when I try to start with either key. But the buttons work fine on both keys. Does this sound like the keys both need to be reprogrammed to you? What do you think? Trying to figure out if a third key is the answer or if I need to go to the dealership. I so appreciate both videos by the way!
@Hindsight101
Жыл бұрын
I would have the dealership look at them just in case programming them doesn't work then you don't have any keys that work.
@LCarter-justagirl
Жыл бұрын
@@Hindsight101 Thanks for the quick reply!
@Hindsight101
Жыл бұрын
Np
@ibrahime2193
3 жыл бұрын
Hello Mine is Ford Fusion 2012 se While programming two new key fobs, something went wrong probably I pressed other keys than the lock key. Anyway, now the original key works fine. but the problem is : the light that indicates pairing mode is flashing every 2.5 seconds, if the original key is entered it stops flashing and can be turned on. BUT if the misprogrammed key is entered its flashing pace increases to ~ 3 times every second. The newly misprogrammed keys can lock/unlock doors but they will not open the trunk or turn the car on. I try the following but neither worked 1- Discount the battery overnight 2- switching the original key on/off and Entering programming mode and let the car exit pairing mode by itself. Please help, is there a way that let me exit the programming mode and/or reprogram the new misprogrammed keys?
@faithalways123
3 жыл бұрын
Ok I have two keys. But...One of the keys the blade fell off somewhere. I am screwed? My luck I am. Why in the hell does it always have to have bullshit like this.... $$$$$.. locksmith said 50 bucks. I still dont want to pay 50 for this procedure. It's just bullshit. I have both heads why cant I simply have a new blade cut? 50 dollar is 50 dollars. My income is tight. Thank you for an informative video. I dont blame you for the manufacturer doing this. Thank you again.
@Hindsight101
3 жыл бұрын
Ever since they started putting chips in keys because of security feature it's made it a lot harder to do things yourself if you did lose the piece with the chip in it then yes you'll have to go to the dealership or locksmith $50 is actually a good price because other places will charg close to $300
@mauricejohns3635
2 жыл бұрын
Have a question about your programming a key fob key. Recently purchased a 2015 Ford Explorer XLT I just ordered it two different type keys with key fob attached.. do I have to program the key first before the key fob part or can it all be done at one time
@Hindsight101
2 жыл бұрын
It has to be done separately
@Tropicalpisces
4 жыл бұрын
This was helpful. I have 2 keys for my 2011 Fusion, one with fob that the battery died and one normal key that still works to start the ignition... but I received both from a locksmith last year who programmed them for me, so not the originals... hmm 🤔 still perplexed.
@Hindsight101
4 жыл бұрын
You need two working keys to program a third key since you only have one working key this will not work you’ll have to go back to that locksmith or the dealership
@Tropicalpisces
4 жыл бұрын
@@Hindsight101 thank you very much. I did have to go to a locksmith so it was 150. My fob was a flop. :) but thank you for the future!
@miskito1524
4 жыл бұрын
The keys I got from amazon are not cut and no one wants to cut them! Any help?
@patricknegro5071
4 жыл бұрын
@@Hindsight101 I have two working keys to start engine.Tried your first video.Wanted to add Third key with fob.Got it cut.Then used Original keyfob then one transponder key.Waited 5sec....etc. then tried third keyfob. Still not programmed. What could be the problem. I have a 2008 Ford Fusion. Anxious to program my new keyfob. Would love your advice.
@Hindsight101
4 жыл бұрын
Patrick Negro where did you get the key from? The key could be bad
@mysticwine
11 ай бұрын
Can the key be programmed as a valet key only? Valet will start the vehicle and unlock the door, but will not unlock glove box or, with an F-150, unlock access to the spare tire.
@Hindsight101
11 ай бұрын
I don't think so. At least not for my car. Maybe for other cars
@mysticwine
11 ай бұрын
@@Hindsight101 Maybe it's a hidden feature.🤔
@antoniogarcia-hl8pi
2 жыл бұрын
My key is working great, but not the buttons, I change the battery and it start working again but after 4 days it stop working. It is a 2010 ford edge, so the key and FOB are 1 pice Can I just buy a separate FOB and program it or I need 1 that already works
@Hindsight101
2 жыл бұрын
Technically you can get a separate fob. I think your key might be defective
@jeremydgarcia
2 жыл бұрын
Question for you....If I have lost a key, or it got stolen, and only have one key left...can i reprogram just that one I have and will that wipe the lost/stolen key from the car and not make it work any longer? I know it will still unlock the car with the key itself, but will it make the buttons no longer work and make that key unable to start the car? For reference, I have a 2011 Ford Escape
@Hindsight101
2 жыл бұрын
You need two working keys to program a third key. If you reprogram a keys fob (the buttons) then it will erase all the other fobs if not reprogram at the same time
@jeremydgarcia
2 жыл бұрын
@@Hindsight101 Got it. But is there a way to erase the stolen key so it won’t start the vehicle? I get that the fob can be wiped and the the key will still unlock the door, but curious about the ignition. Thanks!
@Hindsight101
2 жыл бұрын
I think you would have to go to a dealership for that
@joeyngan7977
4 жыл бұрын
how do program a key for 2018 Ford C-Max to start and remote (doors, etc.) I bought the extra keys and had them cut at the lockshop ... it will turn in door and starter (but have 'Fault' starting the car.
@Hindsight101
4 жыл бұрын
Try this kzitem.info/news/bejne/qo-GqaeliouFpaw
@jtharmon49
3 жыл бұрын
i attempted to program my 2012 ford 150 lariat. I only have one key but it does have an engine start button. I attempted to push the brake before it started but was unsuccessful in stopping the engine from starting. It appears that the engine starting is a deal breaker. I even pushed the brake before pushing the engine start buttons but to no avail. How do I push the start button on the key fob without it starting.
@Hindsight101
3 жыл бұрын
Unfortunately I am not too familiar with this method, did you check out the video in my description - How To Program A Ford Transponder Chip Key With Only 1 Key and A Remote Start System: kzitem.info/news/bejne/uJerl6d9mpqDh20
@FranksShitBoxCollection
Жыл бұрын
What if I have 2 keys but 1 is just a clone of the original key from when I first bought the car? Like I went to Home Depot or somewhere like that and they just made a copy of the original key.
@Hindsight101
Жыл бұрын
If your clone key starts the car then you should have no problem. The only issue you might run into is programming key fobs, but I'm not sure
@mrgbar
2 жыл бұрын
Great content but the biggest question for guys like me is what are our options if you only Have 1 key and would like to get another programmed? I’m still unclear on what the options are? For those you already have 2 working keys and need a 3rd seems easy breezy. In my case I need all new keys programmed since I had to change my ECM.
@Hindsight101
2 жыл бұрын
There are options in the description of the video for you to try
@spydermonkey2127
2 жыл бұрын
Have you ran into the "Starting System Fault"? I was able to cut the key, it turns and lights up my dashboard but it will not start the truck. I've also tried the turning the key 8 times method ad well. When I insert the 3rd "new" key, it functions the same programming as locks and unlocks, but the buttons do not work and does not start the truck. I have a 2014Raptor with the IKT SA stamped on the back of they key.
@Hindsight101
2 жыл бұрын
Where do you get the spare key from. It might be defective or incompatible
@spydermonkey2127
2 жыл бұрын
@@Hindsight101 Thanks for fast reply. I got the keys from Amazon like 2 years ago. I deactivated the MYKey(thats why i Needed a new key) with ForScan, but finally got around to program this new key. I'm going to try and use ForScan to program the new key.
@spydermonkey2127
2 жыл бұрын
@@Hindsight101 I was able to get the ignition to start with the ForScan software. Now, I can't get the buttons to work. I tried the cycling 8times and the doors never locked or unlocked. I'll keep trying.
@Hindsight101
2 жыл бұрын
Let me know how it goes
@donaldvsluis1380
Жыл бұрын
Derrick when i look at some key fobs on amazon it says 2 original keys required . I have 1 original that the open button stopped working. I have a 2nd key made with no fob because of price it does start my truck. So by your video this should work. Is this correct? Thanks
@Hindsight101
Жыл бұрын
As long as you have two keys that will start the car. Yes it should work
@madeinchina2010
4 жыл бұрын
Hi, I apologize for my English. I have a 2015 Ford Focus. I have one original key. There is no function to start from the remote control. Can I register a new key myself?
@Hindsight101
4 жыл бұрын
If you want to program the remote control then you can do it with one key. Follow the second part of the video and turn the key 8 times then press a button on the remote. Also, make sure the remote has a working battery. If you want to program a key you will need to keys that work for you Focus to program a third key. See this video kzitem.info/news/bejne/kYqCqYGsjKqfrKg
@sebastian9020
4 жыл бұрын
Hello Derrick! I've watched your video with key programming for ford and I try it my self. Like in your video, I followed your steps and i managed to program the third key. I start the car with the third key, it starts, but ONLY for the first time, then when I turn off the car, and tried to start it again with the third key, it doesn't start, like the key is not programmed, can you give me any advice with this problem? I have a ford focus 2007
@Hindsight101
4 жыл бұрын
Have you tried to program it again
@daveengstrom9250
3 ай бұрын
You took several paragraphs to say this: "Start with 2 existing, working keys."
@Hindsight101
3 ай бұрын
Hopefully in the future you can make your own video. That's much shorter
@roachystrashcan4074
3 жыл бұрын
Hey wats up. Key fob won't program to car after putting the car in program mode. Do I need to get my fob professionally set by an auto locksmith?
@Hindsight101
3 жыл бұрын
Not sure what the issue is
@kevinelrod6284
2 жыл бұрын
I have one key fob and a blank key that will unlock and go in the ignition and turn my truck on but won't actually start the engine. Will this work to program an additional key fob since I'm not actually starting my truck during the programming process? Thanks
@Hindsight101
2 жыл бұрын
Take a look at these If you only have one key this product might work for you geni.us/gC3JOG (amazon) How To Program A Ford Transponder Chip Key With Only 1 Key and A Remote Start System: kzitem.info/news/bejne/uJerl6d9mpqDh20
@Hindsight101
2 жыл бұрын
You need 2 working keys that will start the vehicle to program another key. If its just the fob (buttons) you want to program then you can use one key
@stephenbaldwin5747
2 жыл бұрын
How can I program the chip in 2014 f150 with only 1 key
@Hindsight101
2 жыл бұрын
This video should answer your question kzitem.info/news/bejne/kYqCqYGsjKqfrKg
@SandraSilva-eu9ke
4 жыл бұрын
I want to fix my buttons, lock and unlock, my car starts... can I fix that and do I need a 2nd key to reprogram my buttons? I was turning my key a few times to start my car 2012 Ford Edge and then my unlock button stop working..
@Hindsight101
4 жыл бұрын
You only need one key to program the fob, you need 2 keys to program another key
@dashtyATG
3 жыл бұрын
Hy thanks for your time. Q what if the original blad key remot dosent function locking and unlock ford explore 2013 what can be done please.
@Hindsight101
3 жыл бұрын
You may need a battery replacement
@dashtyATG
3 жыл бұрын
@@Hindsight101 i did that already
@Hindsight101
3 жыл бұрын
@@dashtyATG then you may have a defective item
@Islandman08
Жыл бұрын
Hi Derrick, like your vids, just stumbled onto your channel searching for solutions to my problem, I did subscribe. I just had to replace the battery in my 2011 Ford Explorer and after that the car won’t start saying “starting system fault”. There was no starting issues prior to having the battery replaced!🤷🏻♂️ However, I thought the key fob may have lost connections with the car so I gave your instructions a go and got the lock/unlock doors activation to function but the car still will not start!🤷🏻♂️ I only have one key so was not trying to program another key, just trying to get the one I have to work thinking it’s the problem! Any help is appreciated. The dealer don’t have a mobile service and said I’ll have to get the car to them, that’s a tow truck cost plus the chunk the dealer garage will charge!😤Thanks anyone!🙏🏼
@Hindsight101
Жыл бұрын
Hey thanks for the subscribe. I think your issue is your are going to have to find a way to get it to the dealer or someone to come out to you because I think the key is no longer programmed to your car. I don't know of a way to do it without having a working key
@Islandman08
Жыл бұрын
@@Hindsight101 Tks for the reply Bud, it was the key which was my thought as well! I got a third party business to come to me and program a new chip key and separate fob, took about 15mins and about 325 smackaroos and a tip to get the job done, the car came right back to Life!👍🏼 lt’s cheaper than what the dealer cost would’ve been! Btw, I’m from the Cayman Islands🇰🇾 and the business is Pimped Auto that came through for me💪🏼in case anyone may be interested!
@Hindsight101
Жыл бұрын
@@Islandman08 to make sure this doesnt happen again get to working keys and then you can program your own keys and will not have to pay someone else
@Islandman08
Жыл бұрын
@@Hindsight101 Hey Derrick, Tks for the advice but why can’t it be done with one working key? It’ll still cost me to get another working key programmed so don’t think there’ll be any savings gained!🤷🏻♂️ Albeit, there’s a convenience gain I guess!
@Hindsight101
Жыл бұрын
@@Islandman08 it's a security feature
@tonyleuch2703
4 жыл бұрын
Bought a 2014 Explorer xlt with nonworking aftermarket remote starter. The two keys do not have a remote start symbol. Even so, do those two keys contain the internal button required for a Ford oem remote starter, or would I need new keys with the identified remote starter symbol? I don't want extra off brand fobs on the keys if possible, and would like Ford equipment if possible.
@Hindsight101
4 жыл бұрын
You'll need a new key with a remote starter or aftermarket fob remote starter
@tonyleuch2703
4 жыл бұрын
@@Hindsight101 Thank you
@fishiniseasy
3 жыл бұрын
I have the spare key woth no fob for my 2002 ranger. I know because my vehicle limits out at 90mph. Will this method still work to program a new cut key fob?
@Hindsight101
3 жыл бұрын
As long as you have 2 key that will start your vehicle. It will work
@fishiniseasy
3 жыл бұрын
Thank you
@Hindsight101
3 жыл бұрын
Welcome
@vasimmughal
3 жыл бұрын
Remote buttons didn't work for ford explorer 2015, is there any other process for ford explorer?
@Hindsight101
3 жыл бұрын
im not sure what you are asking
@vasimmughal
3 жыл бұрын
I followed the process that you mentioned. The key is programmed but fob buttons(lock/unlock) are not working. After turning the ignition on and off 8 times, the lock sound suggested that programming mode is on but new key fob buttons didn't work. Can you please guide what could go wrong or if there is a separate process for explorer 2015
@Hindsight101
3 жыл бұрын
Where did you get the key from? The key could be incompatible that's what happened to my first key from ebay
@vimaljain4071
Жыл бұрын
I have remote key fob with key blade in it. Can I program new key fob with it for 2020 ford escape push button start
@Hindsight101
Жыл бұрын
You need two keys. It sounds like you only have one
@vimaljain4071
Жыл бұрын
I can start car using 1. Remote start using Ford pass app 2. Using remote start from fob 3. Using push button of car with key fob in the car
@Hindsight101
Жыл бұрын
Check the youtube link in the description it might help answer your question
@vimaljain4071
Жыл бұрын
Thanks let me check
@vimaljain4071
Жыл бұрын
I checked couple of videos but not able to find specific video related to my case. If you could help and point to specific video will be great help. Thanks in advance
@MnDisease
2 жыл бұрын
So I have a problem with my 2013 Ford Exploerer, where I have both keys. They are both Admin keys, just one doesn't start but unlocks and locks perfect. The other works fine. What would I do to reprogram the key that doesn't start the car?
@Hindsight101
2 жыл бұрын
You will not be able to do anything. You need two working keys to program a third. Right now you only have one working key
@MnDisease
2 жыл бұрын
Well I was wondering one of my keys just stopped working. It probably got deprogrammed or something. It locks/unlock and panic work fine. It just doesn't turn on the ignition. But it beeps and gives all the warnings. What do you think I could do about that? Go to the dealership? Thank you so much for the quick response
@Hindsight101
2 жыл бұрын
@@MnDisease have you tried checking the battery? But yeah you might have to go to a dealership or if there's a local place that does keys as well that might be cheaper
@MnDisease
2 жыл бұрын
No, I haven't but I'm gonna check it and the fuses too. Thanx again friend
@slimyelow
Жыл бұрын
But I have 2 keys and one stopped working after replacing the Battery. It still starts the car when holding it close to the console. This is for a push button start 2012 Focus Ti.
@Hindsight101
Жыл бұрын
I'm not familiar with the push button. You can try it but you may have to get them programmed by professional
@ssergeant9682
5 жыл бұрын
I have a ford F150 with remote start. but only one key. so the remote start on my key fob will suffice as a 2nd key? how can I test this and do I need a part # for the key fob? how do I go about getting the key cut in order to program it? the local locksmith wants over $100 just to cut the key. then another $40 to program it. the local ford dealer in the svd dept said he would cut a key for me at a cost of $10 if I provided him with a blank. in what order do I do all this. ? Im assuming i have to get it cut first and then can you confirm if I order the correct blank and he cuts it - that should work for the proramming part? I've read stories that if you do it wrong - it may cause your original to stop working?
@Hindsight101
5 жыл бұрын
You can’t really test it you just have to try and see if it works. I would go with the cheapest place that will cut the key but if the cheap place messes up you have to get a new key. You will need to cut the key first
@ashleyfaith82
2 жыл бұрын
I have 2005 ford escape....for some reason I can't get remote to work. Help , Help
@Hindsight101
2 жыл бұрын
Have you changed the battery?
@ashleyfaith82
2 жыл бұрын
@@Hindsight101 I ordered remote from Amazon they brand new....and my truck battery new.
@Hindsight101
2 жыл бұрын
They may not be compatible even though Amazon said it would
@ashleyfaith82
2 жыл бұрын
@@Hindsight101 thank u so much for responding....got to work ...just work when it wants to.
@cyclest9300
2 жыл бұрын
Hello Derrick! the key fob in one of my original keys was damaged and after watching your video I decided to purchase a blank key from Amazon and I was able to programmed it following the steps you described in you video and now I got 3 working keys with the key fob attached, Thank you very much!!! Now I’m trying to program a 4th key (It’s just a regular key without the key fob attached) and for wherever reason I can’t get it programmed, any tips that will help me to program this key??
@Hindsight101
2 жыл бұрын
The key might not be compatible
@cyclest9300
2 жыл бұрын
@@Hindsight101 it's just a blank "ford key" I got from the locksmith that cut the replacement key I bought from Amazon. Do the key needs to have a key fob to be able to be programmed?
@Hindsight101
2 жыл бұрын
@@cyclest9300 no it doesn't have to have a fob but the chip and the key does have to be compatible with your car
@cyclest9300
2 жыл бұрын
@@Hindsight101 thank you for all your help and keep up the good work!!!!
@darryllee9190
Жыл бұрын
@@cyclest9300 hay my brother I have a car with no original key. It's lost. You say I need two key that work to do it. If I have the lock Smith to cut me a new key that's compatible, will it work even thoe the key I had cut has not been programmed. That's my question when you say two working keys? Do you mean two keys that turns the car ignition to run or on position? I need you to explain the two keys.
@charlesford9423
4 жыл бұрын
what about programing the trunk or panic/horn button?
@Hindsight101
4 жыл бұрын
Program the key will program all of those features as well
@charlesford9423
4 жыл бұрын
tnx
@gregorybrown9474
4 жыл бұрын
Can you have a combo key and a regular key as two keys
@Hindsight101
4 жыл бұрын
Yes
@turbotato
2 жыл бұрын
Thanks for both of your videos. I wanted to ask another question...Are you familiar with the Simple Key key programmer? It allows you to program a second (actually up to 4) key even if you only have one original ford key. Do you know if the simple key actually creates another administrative key (ie allows you to make more keys using the ford factory programming mode)?
@Hindsight101
2 жыл бұрын
I have not personally used the simple key. Someone suggested it to me in the comments
@turbotato
2 жыл бұрын
@@Hindsight101 I'll answer my own question...I will answer my own question...Once you make the 2nd key using the simple key programmer, you can follow the standard Ford programming method (insert first programmed key, insert second programmed key, insert unprogrammed key) to program additional keys without the use of the smart programmer. So the Smart Key Programmer does make a key that the security system recognizes as an "administrative key". Also, for the extra keys, I was able to purchase a generic key from E-bay and program it as a 3rd key...there wasn't a need to buy another specific smart key blank. I hope this helps others!
@themfknightrider420
4 жыл бұрын
got a question, i got a 2013 ford taurus sel and only have a key with no fob. could i get another key made and then program a key fob without going to the dealer?
@Hindsight101
4 жыл бұрын
You need 2 working keys to program a third key. But you could program the fob with one key
@themfknightrider420
4 жыл бұрын
@@Hindsight101 im going to have other key made so i can have 2 (only have the one now) so when i get the other key made. i could program the key fob myself?
@Hindsight101
4 жыл бұрын
You can program the fob with one key
@themfknightrider420
4 жыл бұрын
@@Hindsight101 how?
@Hindsight101
4 жыл бұрын
kzitem.info/news/bejne/qo-GqaeliouFpaw
@jonathanstremming102
3 жыл бұрын
Bought a new uncut key for a Ford 2013 Edge. Had it cut. Programmed the FOB using the 2-factory key method. Lock, Unlock, and Alarm buttons work. Key will open doors and turn ignition on. Key WILL NOT start the vehicle.
@Hindsight101
3 жыл бұрын
Where did you get the key from?
@jonathanstremming102
3 жыл бұрын
@@Hindsight101 I bought it from remotesremotes.com through Amazon. I checked the VIN with Ford and then talked to customer service about it. They could not get the key to work. The dealership wants $280 for a replacement. sigh. I gave up.
@Hindsight101
3 жыл бұрын
@@jonathanstremming102 you can try returning the key and asking for a replacement
@Austinp91
4 жыл бұрын
Does my 3rd key need to be cut for me to program it?
@Hindsight101
4 жыл бұрын
To program the key yes to program the fob no
@GlynRobinson
4 жыл бұрын
I have two keys that work in my 2011 grand marquis. So I can add two more keys? I have all extra key fobs that are programmed and work on the car.
@Hindsight101
4 жыл бұрын
Yes you can add two more keys
@GlynRobinson
4 жыл бұрын
Thank you for the quick reply. I was going to do and no I can’t find my new keys that I bought and had cut. Lol.
@Hindsight101
4 жыл бұрын
Good luck
@GlynRobinson
4 жыл бұрын
@@Hindsight101 I ordered more. thanks
@4G63FD
3 жыл бұрын
So you saying the 2nd key can just be a regular blank locksmith key that has no chip and no buttons?
@Hindsight101
3 жыл бұрын
It has to have a chip. You can use an uncut key if its connected to an aftermarket remote start system
@4G63FD
3 жыл бұрын
@@Hindsight101 Ok, so this is completely useless to me. I only have one key and most people only have one key. That's why they/we are trying to program another one.
@Hindsight101
3 жыл бұрын
You have to have 2 keys to program another key. Its a security feature
@ethanpoops
3 жыл бұрын
So do I need two programmed keys?
@Hindsight101
3 жыл бұрын
Yes
@hectorsoso2406
Жыл бұрын
There’s a kit that sells for 80 bucks and you could program 4 keys if you want
@Hindsight101
Жыл бұрын
Can you share the name?
@YasserElEkhnawy
3 жыл бұрын
I bought used 2011 Ford Escape XLT 4WD but it doesn't come with the key fob. I'm little bit concerned and don't know if all models support key fob or not. Ford dealership just said if it doesn't come with key fob then it doesn't support this functionality
@Hindsight101
3 жыл бұрын
I did a quick search and it looks like your vehicle does support a fob.
@YasserElEkhnawy
3 жыл бұрын
@@Hindsight101 Thanks man
@YasserElEkhnawy
3 жыл бұрын
Hi I got my keys cut at hardware store, I was able to program the key fob I followed the same steps to program the new key but I’m getting the same error message every time “Key can’t program “ Any ideas?
@Hindsight101
3 жыл бұрын
Where did you get the key from?
@YasserElEkhnawy
3 жыл бұрын
@@Hindsight101 sorry for late reply, I got the keys from ebay, should it be a problem with the key itself? I thought it’s just a peace of metal
@chrisjay2901
2 жыл бұрын
I have a 2013 Ford explorer and when I try and program key fob it will not do anything...I turn it 8 times and nothing happens
@Hindsight101
2 жыл бұрын
Is the fob the original or new
@chrisjay2901
2 жыл бұрын
@@Hindsight101 it's the original key but different fob...I'm saying when I turn key 8 times nothing happens for I can even see if the fob will work or not.....
@Hindsight101
2 жыл бұрын
Are you sure the fob is compatible with your vehicle and did you follow the steps in this video kzitem.info/news/bejne/qo-GqaeliouFpaw
@chrisjay2901
2 жыл бұрын
@@Hindsight101 it's actually the key....when you said do it 8 times then we will hear it lock the thing is it never locks....that's the key that came with the vehicle....
@Hindsight101
2 жыл бұрын
@@chrisjay2901 I have heard some keys do not lock when programming
@OscarHernandez-rj1dl
Жыл бұрын
It'll work but you have to have the right chip. If he has the wrong ship it won't work
@Hindsight101
Жыл бұрын
Exactly
@sabahjason1
2 жыл бұрын
My spare key already working , the title is kind of wrong , you should of wrote “ extra key “ instead spare key
@Hindsight101
2 жыл бұрын
Thanks for the info
@Mcluvin73
5 ай бұрын
Thanks my friend. I owe you a coke
@Hindsight101
4 ай бұрын
no problem
@daveshangar6820
10 ай бұрын
Most people have no more than and need no more than two keys. Having a third key is completely impractical. It looks like I'm probably going to have to March down to Ford and pay them their lousy $100 to program one lousy key
@Hindsight101
10 ай бұрын
That's an issue that has to be changed by Ford. It's a security feature they put into place
@timthevanman9688
2 жыл бұрын
you say auto start what if you have a push button by the batt not wireless
@Hindsight101
2 жыл бұрын
Sorry not sure
@nelsonlopez9412
3 жыл бұрын
I have an older ford fusion that uses the key that has the remote built into the base (the far left one you show at 2:09). Can I buy a newer switchblade style key/fob like below, and use this method to program it to my older car? www.amazon.com/gp/product/B01J47IIZ8?pf_rd_r=7KV5HR1NFAJ11RKFNFHM&pf_rd_p=5ae2c7f8-e0c6-4f35-9071-dc3240e894a8&pd_rd_r=8e60e9b8-b7f7-46c0-a63d-c1a0452f9cbe&pd_rd_w=xDW87&pd_rd_wg=prZoi&ref_=pd_gw_unk
@Hindsight101
3 жыл бұрын
Those are laser cut keys in believe they have to be done at a dealership or the like
@chechecheche
4 жыл бұрын
not worked in our F150 Lariat 2005.....after 8 times (on/off) NOTHING to changed(((
@Hindsight101
4 жыл бұрын
Are you trying to program the key or the key fob? Also is this an original key or a new key?
@chechecheche
4 жыл бұрын
@@Hindsight101 We buy new 3 buttons from Amazon
@Hindsight101
4 жыл бұрын
It might not be compatible. My first key from ebay didn’t work
@chechecheche
4 жыл бұрын
@@Hindsight101 ooh, its can be some training key fob? ))))) I dont think about this possibility) How U think: how many pcs. need to buy for find One which can work>)
@Hindsight101
4 жыл бұрын
It’s just trial and error to see what will work. Just make sure there is a good return policy
@richardmcfaul5317
4 жыл бұрын
I am Mrs.
@nftrobits3135
5 жыл бұрын
If I have two keys, one with a fob that doesn’t work, and one without a fob, will I be able to program the third key fob?
@Hindsight101
5 жыл бұрын
As long as you have 2 keys that will start the car you can program a third key
@nftrobits3135
5 жыл бұрын
Does that include programming the fob as well?
@Hindsight101
5 жыл бұрын
The fob you just need one working key
@rustyshakelfur
Жыл бұрын
"Two keys" means NOT one key and a CLONED key. They have to be two separately programmed keys otherwise your car just sees ONE key.
@Hindsight101
Жыл бұрын
Thanks for giving the info
@johnbroadwell2603
10 ай бұрын
WHat the title is program with one key but then you say you gotta have two .... are you a used car salesman as well???
@Hindsight101
10 ай бұрын
I really don't get your comment
@johnbroadwell2603
10 ай бұрын
You have to have 2 keys, to program another, you cannot do it with one... @@Hindsight101
@Hindsight101
10 ай бұрын
There are ways look in the description
@johnbroadwell2603
10 ай бұрын
Can you program a spare key with one working Ford key? AND the the first thing you say is that you must have two keys that work ... thanks for nothing ...
@Hindsight101
10 ай бұрын
There are ways looking in the description I list alternatives
@RickFurnival
22 күн бұрын
If you follow his provided link (which he referred to in the video) you will find a video from another gentleman who demonstrates the one-key-with-remote solution. It worked perfectly fine for me.
Пікірлер: 272