the answer is yes. But if you use Hall sensors only from one wheel, the second wheel you have to precisely align and lock rigidly with the first one. Hall sensors are responsible for sending voltage to two of the three windings, when it is not synchronized, the motor will jerk or resist against the other. Sorry for my english :)
@MrCopcreator
5 жыл бұрын
Yes u are right, i did this test whit both wheels on electric scooter and only 1 controller, while they was synchronized it was runing then suddenly start braking 😊
@tntexperience
3 жыл бұрын
change the yellow and blue wires over on one motor ,both motors will rotate same direction
@iforce2d
3 жыл бұрын
The only way this would work is if the wheels were clamped together (with magnets/poles at the same angle) and always rotated exactly the same. So it could perhaps be useful if you want a single more powerful wheel.
@lucatielofmirrah1389
Жыл бұрын
Maybe a little late for me to ask you this, but have you tried this? Do you know anyone who did this experiment? I really want to try this since in my country this controllers are just really hard to find and expensive. I want this to have a better acceleration and also have a better overall torque
@freestylesganggangganggang6880
3 ай бұрын
Swap the wires on the ends of esc,the one that goes the opposite of your wanted direction.. your current is fighting it's self and so this here u made is a slow cooker bunnerupper
@ricardoreal28
11 ай бұрын
Yes, try conneting the 2 motors in off , without the controller , remember that kind of motors are a gen to , make some turns to 1 motor &see whats goen on with the other if its not turn at the same side interchange 2 phases till you got it !! Sorry 4 my language im just try to help 😜
@trapsta205
2 ай бұрын
The motors will spin in opposite directions. Two motor controllers is needed.
@pedrohlt93
6 жыл бұрын
It doesn't work with load. The wheels will lost sinchronism and you will burn your controller. Only works if you lock the two wheels together at the same phase.
@MrCopcreator
6 жыл бұрын
Pedro Teixeira yeah i know that now
@scottrocks1993
4 жыл бұрын
I done this exact same experiment with hoverboard & throttle & controller and it 100% works perfectly without any issues. In the video he didn't wire the 2nd Wheel up. He didn't wire 2th Hall sensor up. Not sure why
@MrCopcreator
4 жыл бұрын
Howerboard controller is useless if u want to use wheels for example in diy electric scooter, I have tried this with electric bike controller.
@ryanokeefe12
3 жыл бұрын
He's using ONE motor controller... There is only ONE hall input.. given that the wheels will always be at different locations, this will never work. You'll always have one motor that jolts and stutters as the phases are not synced.
@TBloodFPV
2 жыл бұрын
brushless users would have switched outer wires to the brushless to atleast compensate the direction prob on the 2nd wheel... make a hall sensor harness to double the input... ~n~ ur done P>S u use to much elec tape LOL
@natewaters5579
5 ай бұрын
Yes you can I've done it connect 3 phase wires in parallel
@Hacktuber
7 жыл бұрын
bro you save me some time,thanks
@MrCopcreator
7 жыл бұрын
American Hacker you are welcome :)
@sergiotequidalozoya3875
6 жыл бұрын
American Hacker what are you doing here’s?
@scottrocks1993
4 жыл бұрын
I done this exact same experiment with hoverboard and it 100% works perfectly without any issues. In the video he didn't wire the 2nd Wheel up. He didn't wire 2th Hall sensor up. Not sure why
@chickenmanatvtuft8283
3 жыл бұрын
@@scottrocks1993 ooo my fu..ing good point was to power it whit a 1 hall speed controller not dual motor speed controller bro!!!
@ogi22
3 жыл бұрын
@@chickenmanatvtuft8283 I have never done this, so it is only my speculation. My background is warehouse automation and high bay area sotrage automation, so i connected a few motors in my work time. It should be perfectly possible to run 2 wheels on one controller. The only problem for me is that if you have one input for the sensor and probably connecting two of them parallel is not the best idea. If both motors have the same basic properties (the same amounts of coils, magnets, other parameters), it should be sufficient to connect sensors only from one motor and just power to another one. The other motor would be running "by default". Also the controller should be powerful enough to run 2 motors together. Just add motor powers, add an extra 20% - 30% for overcurrent during acceleration, perheaps a little fan for cooling and you should be OK. If there is a temperature sensor (protecting the motor from overheating), it would be nice to make a circuit taking both readings and feeding it to the controller. Something like an "OR" gate - doesn't matter which one overheats, both stop working.
@chriss8206
Жыл бұрын
I spoke with somebody regarding 2 motors 1 speed controller as long as the motors don't overload the amount of watch that the controller makes it works 2 2 50 W motors would run on 1 500 W controller I think
@sumeesa
6 жыл бұрын
initially they were running in the opposite direction, would it make difference by connecting motor cables in a diff order?
@MrCopcreator
6 жыл бұрын
Sumeet Saini i don't think so, but u could try, i was on my scooter using one controller for both wheels and when i start they was runing but after releasing throttle they both was braking to full stop 😊 i eneded up using two controllers 😊
@larrycurtis2791
2 жыл бұрын
That is what makes it work lol. Wire all hallsensors together same color swap one motor lead for direction or switch polarity. I have off forward reverse all works. Cheap eBay controller and throttle.
@saldi3543
7 жыл бұрын
I have this problem before you can run it with one controller in different directions, you have to change the connections in hall sensor and your three phase input to one of your motors, you should not connect the same colors just try more
@MrCopcreator
7 жыл бұрын
sal dI thanks man ill try it
@saldi3543
7 жыл бұрын
you're welcome
@mahshidsardar4204
5 жыл бұрын
MrCop hello I live in Kurdistan in Iraq, I want by one off this controller, thank you for your help please.
@carlosrojeda
3 жыл бұрын
Can you elaborate ? One controller , 2 hubs master and slave but different directions possible ?
@chuckmaddison2924
4 жыл бұрын
An idea I have not tested yet. It might not run 2 motors directly but you might be able to send the output to drive 6 additional MOSFETs to run motor in sensorless mode just a thought. Was playing with idea of converting my board to 4wd.
@MrCopcreator
4 жыл бұрын
Wow thats good idea, I bet someone who is more in to Electronic would made this posible
@ryanokeefe12
3 жыл бұрын
Still won't work.. the phases won't be aligned.. as soon as the wheels try to spin at different speeds (like going round a corner, the front wheel has to travel further), the motors ill lose sync.
@dustymannjr3925
Жыл бұрын
Hello my friend. Can you please give me the name of the electric box and throttle u used. Thanks in advance
@staszeko3865
2 ай бұрын
Its an e bike controller
@wesslee9060
4 жыл бұрын
You only connected one motor hall sensor????? Explain???
@ryanokeefe12
3 жыл бұрын
It's a test to see if ONE motor controller can run TWO motors... READ the description... there is no second hall input.. If you connected the hall sensor wires together, they would give conflicting signals as the motors will never be perfectly synced to each other.
@duongvu2679
2 жыл бұрын
Maybe need spin of Wheel to right coner of Magnetor block can make it run toghether!
@thestarafresh
7 жыл бұрын
Will only work with no load. trust me I've made a go kart with them need a second controller other wise the wheels will hault. because the wheels are no longer aligned. oh forgot tho you can run without hall sensors. and you can use the same padomiter tho
@rx-robo3405
4 жыл бұрын
Is it safe not to use the hall sensor?
@stuartdavies8388
3 жыл бұрын
@@rx-robo3405 Sensorless Mode
@benji376
7 жыл бұрын
Love your videos bro
@MrCopcreator
7 жыл бұрын
Unnamed. Thanks man
@polymexdf69
7 жыл бұрын
Great work good info but can you takl about you doing and not add music to the video that can help to better understand what you doing thanks
@MrCopcreator
7 жыл бұрын
polymexdf69 thanks, i dont really want to talk because English is not my 1st language and i believe no one would like to listen my english with terible accent :)
@polymexdf69
7 жыл бұрын
do you have face book or something I can contact you for help on a project like this thanks need help
@MrCopcreator
7 жыл бұрын
polymexdf69 try to find me on facebook, Aivaras Dumbliauskas :)
@polymexdf69
7 жыл бұрын
thanks a lot man
@polymexdf69
7 жыл бұрын
I sent you a friend request hope you don't mind Daniel here
@mishu0102
3 жыл бұрын
wheel won't run without hall sensor cables plugged in?
@welligtonlima6115
6 ай бұрын
Consegue me mandar o esquema elétrico ??
@rohizzle
7 жыл бұрын
Thank you so much, I’ve been wondering the same thing.
@MrCopcreator
7 жыл бұрын
Rohan Sharma thanks, at least i tried and i know i will need another controller :)
@startcherif
6 жыл бұрын
Very thanks for your information, l love your videos, you are a nice person , nice teacher
@frankyoung8221
6 жыл бұрын
Awesome project! tks
@juarezjavier3284
4 жыл бұрын
Ellos. Two motor connect independent?
@larrycurtis2791
2 жыл бұрын
You can I put a video up old thread I no. I had to swap motor leads on one wheel swap blue and green whatever not the hall sensor wires motor lead
@atily900
5 жыл бұрын
you need two controllers and one throttle.
@ramadavince6611
4 жыл бұрын
Monkey has 2 eyes 1mouth and 2 ears.
@epvit
2 жыл бұрын
its a polarity issue.. try switching the + and - of the wirings of that left wheel.. then it will work..silly people.. already made a conclusion without trying different combinations..
@moheezali2222
7 жыл бұрын
you can make 1 throttle power both wheels if you have 2 controllers - you have to connect the throttle to 1 controller (green red and black) then just connect the green wire to the green wire on the other controller. Then connect the power/battery to both controllers - twist throttle and both wheels will turn. What do you think MrCop?
@MrCopcreator
7 жыл бұрын
Shakeel Hussain hi, u know it would work? Or you just thinking?
@moheezali2222
7 жыл бұрын
I got the information from here support.electricscooterparts.com/support/discussions/topics/1000044655
@MrCopcreator
7 жыл бұрын
Shakeel Hussain thanks man for the information, its useful :)
@wojciechlenardt9870
3 жыл бұрын
Link doesnt work. Under link is Date zone
@tobyuebersezig4873
6 жыл бұрын
What speed controller did you use. Link?! Great video!
@alexindustries44
Жыл бұрын
thank you
@chriss8206
Жыл бұрын
Man why didn't you speak and explain what's going on instead of using the music what have been so much more helpful
@perfecttech8676
2 жыл бұрын
Thanx birathar
@MrCopcreator
2 жыл бұрын
Your welcome
@VideoNash
Жыл бұрын
thanks
@AIwithEren2023
7 жыл бұрын
Hello, Is your controller 60 degree? Or 120 degree?
@ruthmjalloh
Жыл бұрын
It good of you
@milestone_achiever4634
4 жыл бұрын
I have this problem since I received the wrong controller from a vendor on eBay. I have a single motor controller but I have 2 hub motors.
@MrCopcreator
4 жыл бұрын
U need two controllers to make it work properly
@milestone_achiever4634
4 жыл бұрын
@@MrCopcreator thanks for the feedback but I just don't have the patience to order another controller off of eBay. The one I have now took about one month to get. What about sharing the wires with each connection? 2 greens go in one, 2 blues go in one and 2 yellows in one. Is it worth a try?
@MrCopcreator
4 жыл бұрын
@@milestone_achiever4634 no point to try it, if u do as u said both wheels need to be moving at the same speed and if one turns a bit more then other one they will stop working, just be patient and get second controller, but remember u can use same throtle and same battery for 2 controllers 😊
@milestone_achiever4634
4 жыл бұрын
@@MrCopcreator it's actually hub motors for a electric skateboard. 90mm wheels
@עילילבשנקו-ג9י
4 жыл бұрын
thanks you very mach
@mny-patentcatalog681
7 жыл бұрын
well done
@TunisiaM2023
11 ай бұрын
Loss of watt and lower speed
@niculescumarius8715
3 жыл бұрын
for second motor,mast change blue en gren wires,green tow blue end blue tow green, work same direction, same tow hall sensor,end work same direction en speed
@marianboteanu8163
4 жыл бұрын
I thing the probleme is because the controller its to small
@TioRico10
5 жыл бұрын
Amigo sera que pode ligar duas rodas na mesma controladora.Edvandro do Rio de Janeiro Brasil
@aktiv8653
4 жыл бұрын
Amigo puedo conectar estos motores directos a la batería,,,, sin controlador?
@inventusg
4 жыл бұрын
No
@EdivaldoGomes
6 жыл бұрын
Hi, did you get better at driving the 2 wheels at the same time?
@MrCopcreator
6 жыл бұрын
Edivaldo Gomes yeah, i used to controllers 😊
@engalihammoud5843
2 жыл бұрын
من اين احصل على المنظمات
@adambalghit490
6 жыл бұрын
I am planning on making an electric skateboard with this technique. do you think it would be possible to pair it with a wireless remote?
@MrCopcreator
6 жыл бұрын
adam balghit yeah u need wirreles just for trotle and thats it, just google it and see if there any for sale
@fredynoya9351
6 жыл бұрын
como se llama la caja de control electrico y como la consigo
@josem-proyects6042
3 жыл бұрын
speed controller. Controlador de velocidad. Motor brushless
@protoyes995
6 жыл бұрын
Is it ok if the battery is difrent mah than hoverboard one?
@MrCopcreator
6 жыл бұрын
ofcourse its okey, the bigger mah the longer distance u can travel with single charge :)
@protoyes995
6 жыл бұрын
thank u i subscribe to you
@kayak347
5 жыл бұрын
Geez how do the pros who build hover boards do it ? They will always go the cheapest route so if one controller will work that what you will find in a hoverbd what a total waste of time
@MrCopcreator
5 жыл бұрын
Hoverboards have two controllers for reason, the reason is steering. Thats why i tried one controller to see if it works and could be using in electric scooter.
@thestarafresh
7 жыл бұрын
what are you making
@MrCopcreator
7 жыл бұрын
+Ben Gough i will make electric scooter with two rear wheel drive, so this way i could have 700w power in wheels :)
@null7969
4 жыл бұрын
Ofc yes, if they run at same speed and same power,
@AndrejGavriluk
3 жыл бұрын
Не фурычит чего то ...
@razacksossohou3943
3 жыл бұрын
Hi bro how are you
@MrCopcreator
3 жыл бұрын
Hello hello dude im good and you?
@razacksossohou3943
3 жыл бұрын
@@MrCopcreator l 'am fine dude l need your help getting some old hoverboard help me find this.
@MrCopcreator
3 жыл бұрын
@@razacksossohou3943 search on facebook market place or ur local advertisements where u from?
@razacksossohou3943
3 жыл бұрын
@@MrCopcreator don't you have.hoverboard with you to help me.
@polymexdf69
7 жыл бұрын
I think you should tal in your language we can have a translator app to translate for us
@MrCopcreator
7 жыл бұрын
polymexdf69 Thanks, will do in my next videos :)
@elgarpulgarin1694
4 жыл бұрын
No.réplica.nada.ni.siquiera.sabe.
@MrCopcreator
4 жыл бұрын
Really yes?
@agens9538
5 жыл бұрын
поменяй фазы...
@lorenzoricheri4485
4 жыл бұрын
😂😂
@teddyramirez2424
3 жыл бұрын
awesome. also try inverting either one of the wheel's motor cable to have them carry same direction, backwards or forward.
@ifyouaintmixinggasitaintgo1843
Жыл бұрын
If you were to go about inverting the wheel how would it be done?
@nickobrien4432
6 жыл бұрын
Did you notice any loss in torque or speed for just 1 to 2? Also does anybody know if this could damage one of the motors that isn't connected by hall sensors? I'm new to all this and am planning an electric skateboard as my first endeavor. Hoping to cut costs wherever possible
@chickenmanatvtuft8283
3 жыл бұрын
No it wont damage the motor✅ i am testing i had the same problem but If you mounth the motor opyset way it wil work but the motors wil shake when you turn your Vehicle but is not Dangerous!!! Post it on my Channel when am done May take a month.
@chickenmanatvtuft8283
3 жыл бұрын
Can you post your Project on you youtube Channel plz
@truckz08ytv
6 жыл бұрын
what is the volt of controller and battery?
@MrCopcreator
6 жыл бұрын
TRUCKZ 08 36v
@MrCopcreator
6 жыл бұрын
TRUCKZ 08 for both
@thestarafresh
7 жыл бұрын
also what controller are you using
@MrCopcreator
7 жыл бұрын
+Ben Gough just simple brushless controller for electric bike :)
Пікірлер: 135