Why not lock in the top first instead of holding it??
@Happilee97
Жыл бұрын
Looks like his arms aren’t long enough to reach the top locks until the center support is removed.
@wendylambert2717
Жыл бұрын
To show his strength! ❤
@David-wg7bj
Жыл бұрын
Thanks for pointing that out as well!
@xxstreme
Жыл бұрын
😂 i think same, it was wrong step. even on deploy
@DG.2030
Жыл бұрын
@@Happilee97Lool that’s sarcasm right ? He’s hand is right next to the lock while he’s holding it?
@jasonmcmaster4968
Жыл бұрын
I’ve seen a couple of designs like this and love them. One thing i have incorporated into my design is an additional cross brace. Everyone uses a single cross brace but by adding a second brace, I can put a piece of plywood on the bottom as temporary storage for tools/small parts that I’m working with during my projects and not clutter up the top of the table.
@ThomasCustomWoodworks
Жыл бұрын
Great idea!
@Tadjourah
Жыл бұрын
@@ThomasCustomWoodworks àaaa01❤❤😊❤❤❤❤❤
@ALCRAN2010
Жыл бұрын
@@Tadjourahurther more, you can widen the holding braces that go on the wall, so as to accommodate the lower plywood piece, the the rest of the table as shown here, all in one spot.
@raymarshall2995
2 ай бұрын
You made that look easy, but I still saw how much control, and muscle it took to lift that table, steady it, and hold it carefully. That sucker is heavy!
@angelamapes7553
Жыл бұрын
I need a dining room table I can do that with. Awesome!
@ThomasCustomWoodworks
Жыл бұрын
Thanks!
@stephenowens5375
10 ай бұрын
I need a wife I can do that with.😁
@papparocket
Ай бұрын
One suggestion to reduce the wobbles common on this type of fold-up bench with an unsecured cross brace is to put a threaded insert into each end of the cross brace and a hole in the bottom leg brace that lined up with the insert so that a bolt with a washer will go through the leg brace and screw into the insert. A knob on the end of the bolt would make it easy to tighten by hand. As suggested in another comment, add a second cross brace and lay a piece of plywood over the cross braces will you get some temporary shelf space is a great idea. Plus a second cross piece with the same threaded insert in the ends of the cross brace and bolts through the leg brace would lock the base together so firmly there would be little or no wrack to the workbench. The negative is that it would add another minute to set up and take down times.
@johnly7688
Жыл бұрын
Pretty awesome dude. I'd probably add 2 vertical 2x4 under the support wall beam just in case. Great job!
@ThomasCustomWoodworks
Жыл бұрын
Thanks!
@charliedavis1384
11 ай бұрын
Agreed, I just added 2 small “L” brackets to ensure it doesn’t slip off when storing. Good job!!!
@Gods1servant
Жыл бұрын
Excellent idea!!!
@ThomasCustomWoodworks
Жыл бұрын
Thank you!
@Normal1855
Жыл бұрын
Nice table.
@MarcelMarcheschi
11 ай бұрын
C'est Super !❤😁
@mochafit42
4 ай бұрын
I need this so bad
@nickmartinez7163
Жыл бұрын
Great job 👏👍👌🙌
@ThomasCustomWoodworks
Жыл бұрын
Thank you!
@MyrtaLopez-wn2xz
11 ай бұрын
SIMPLESMENTE. EXPETACULAR. ADOREI !!!
@ezzatramadan5987
Жыл бұрын
Very good
@ThomasCustomWoodworks
Жыл бұрын
Thank you!
@Hannadayflo
2 ай бұрын
Wonderful! A kitchen table would be great like this too if one had limited space.
@nubiagoncalves8505
11 ай бұрын
excelente! quem sabe um dia eu possa fazer assim com todos os meus móveis. sonho isso sempre! tenho muitos gatos iria me ajudar bastante. incrível genial!👏👏💯👍
@veralpereira
10 ай бұрын
Excelente trabalho 💯🇧🇷🔥🔥
@dandagaiola4750
10 ай бұрын
É show de bola ficou muito legal parabéns 👍 👍 👍 👍
@mnchannel
10 ай бұрын
Sangat praktis dan simpel 👍
@JTodd-fp2ve
11 ай бұрын
GREAT!!!! 👍
@jerrbear1506
5 ай бұрын
You did a great job awesome😊😊😊😊😊😊
@malabarista2023
Жыл бұрын
Excelente!! Felicitaciones!!!
@lindapack3229
Жыл бұрын
Listen fantastic idea for workshop whether it be for a woman or men thanks for showing❤❤❤❤❤❤
@ThomasCustomWoodworks
Жыл бұрын
You’re welcome!
@tedihermawan6105
Жыл бұрын
ilmu yang bermanfaat
@user-jd5fn1uy3f
9 ай бұрын
LOVE THIS! AWESOME IDEA! Making them fold and even roll is great because then they can be stacked easy! Film crews that have to recycle wood should do this and make tables and workbenches that can be reused out of the construction wood!
@wenepzoli
Жыл бұрын
Super cereative! Good day! Thanks shareit!
@AnaCristina-hh9xe
Жыл бұрын
Ideia genial parabéns gostei muito
@bcroft68bc
6 ай бұрын
Fantastic idea for the man that has to store his tools away because he doesn’t always have a project to work on and is either working in a small workshop or his garage, (Like me).
@valnicebarbosa5871
11 ай бұрын
Amei, pra quem tem pouco espaço como eu, é uma maravilha. Valeu a dica.
@Zenforya
4 ай бұрын
Awesome space saver. Idea
@josefreitasoliveira4547
Жыл бұрын
Excelente trabalho
@faustovera1097
Жыл бұрын
Muy buena idea 👏👏👏👏👏 pero sería bueno si nos pasa, un video cómo se hace la mesa, ho las medidas 🙏🙏🙏 gracias !!!
@deldom174
9 ай бұрын
Excellent
@tomnewland8715
8 ай бұрын
Thanks for going to effort to put on line. Love mine
@silvaniasiqueira5456
11 ай бұрын
Top essa ideia👏👏👏👏👏👏
@calvinchung2036
Жыл бұрын
Clever!
@jtlifechannel9134
4 ай бұрын
Wow great idea🎉
@h.d.s.s.3837
10 ай бұрын
Awesomer!
@bienletemknowchannel
8 ай бұрын
Amazing
@boboraratheviper
9 ай бұрын
What is this music ? Friggin' love it !
@user-sr3xi9nj1h
Жыл бұрын
عمل متقن واصل
@RusydiRabbani-kf1jk
8 ай бұрын
Nice ideass!!! *talented skill😊😊😊
@andhewonders
10 ай бұрын
Pretty optimistic thinking my workbench would ever be empty, but that might work if there was a window behind it and a skip outside.
@qualitydigitalvision
Жыл бұрын
Wow Excellent superb very nice
@user-hk8si8gt8xni
6 ай бұрын
Jizzaxda is very good place to live and enjoy the same thing as soon va boshqa ko'ngilochar dasturlar milliy va har bir inson o'z oila a'zolari bilan bir necha yil ichida bir
This is really cool. you don't happen to have a step by step video building this do you? this would be a cool weekend to weekend project.
@ThomasCustomWoodworks
Жыл бұрын
I have detailed written and video plans here. Enjoy! etsy.me/3IFzI34
@GenarusMatus-ou6oq
Жыл бұрын
Muy buena idea, solo creo que cuando la subes debemos poner los cerrojos primero y después quitar el (perno ) palo y doblar las patas. Exelente idea 🎉
@ThomasCustomWoodworks
Жыл бұрын
Thank you!
@gabrielmorales1066
5 ай бұрын
That’s amazing
@frankbullitt4556
10 ай бұрын
very cool idea
@ThomasCustomWoodworks
10 ай бұрын
Thank you! Cheers!
@claudioperandin-428
Жыл бұрын
Ottimo salvaspazio 🔥🔥🔥
@joebourke1018
Жыл бұрын
Cool 👍👍
@ThomasCustomWoodworks
Жыл бұрын
Thanks!
@linamulina5716
10 ай бұрын
Cakep buat meja nya irit tempat
@ThomasCustomWoodworks
10 ай бұрын
Thanks!
@azwarchaniago5592
11 ай бұрын
Mantap sekali
@FrancisFurtak
7 ай бұрын
Yeah man, too cool!
@AmjadAli-ej3dg
Жыл бұрын
Assalam u Alaikum Wow good idea brother..
@luizcoloniese2700
10 ай бұрын
Eu vanda barros. Maravilha.
@anthonymwangi
Жыл бұрын
For real. Wow. Great. I like it ❤
@ThomasCustomWoodworks
Жыл бұрын
Thank you!
@CAESAR_PUTIN_LOVERS
Жыл бұрын
روعة .. Nice job ♥️🙏
@NemesisVNV
4 ай бұрын
Great idea, I'm curious how sturdy it stays in place with those casters. Depending on the work being done I imagine a lot of jimmys and shakes?
@RandyHollis-tx6zc
3 ай бұрын
Thanks!
@ThomasCustomWoodworks
Ай бұрын
No problem and thank you!
@ZulfiqarAli-rf6fp
Жыл бұрын
Wonderful
@mauriciod56
Жыл бұрын
¡Great!
@Da1stDay
Жыл бұрын
Great idea.
@simonjaviergarciaruiz9055
Жыл бұрын
CON LA MITAD DE MADERA QUEDA FUERTE Y MÁS MANEJABLE .
@javierortega8024
Жыл бұрын
Me encanto
@ThomasCustomWoodworks
Жыл бұрын
Thank you!
@graceoverall
2 ай бұрын
A brilliant design, but I would improve a couple things. Namely, spring loaded locking pegs for the legs instead of the cross bar, and also make the bench long enough to accommodate traditional casters instead of the side mounted ones that would buckle under heavy loads over time.
@tukangkayujawa974
Жыл бұрын
I like it 👍👍
@colewomble7078
8 ай бұрын
Yes it can. Cuz I just built one exactly like this
@reachmbg
9 ай бұрын
Supeeerrrr👏🏼👍🏼
@Sophiaboneu_
7 ай бұрын
Nice🎉🎉🎉🎉
@soarebv
7 ай бұрын
Cool
@andersonribeiro5844
10 ай бұрын
Gostei otimo
@marciochaves4700
Жыл бұрын
👏👏👏👏👏👏💯👍✌️
@nancybarrett6266
Жыл бұрын
That's Badass 😊
@ThomasCustomWoodworks
Жыл бұрын
Thank you!
@javierortega8024
Жыл бұрын
Genial😊
@anberart123
8 ай бұрын
زبردست
@joec3247
Ай бұрын
I Like Those Casters, What Are They Called, Where Can I Get Those? Great Bench Idea By The Way, Very Creative!
@VlogAntoTv
10 ай бұрын
Mantap bosqu
@crystalvanchure2759
5 ай бұрын
I add chain so when bringing down it doesn't break or hurt anyone
@anthonydewayne712
Жыл бұрын
My work bench has stuff on it from the work I do.
@toroah
7 ай бұрын
haha you have no idea how much time you saved me... lol i was about to say i'll make this over the weekend... and then i read your comment and was reminded my bench always has stuff on it too lol.
@Chris-fl6fx
4 ай бұрын
Not to speak about having no empty wall available because off all the materials, tools and machine you (want) need to have to get the job done. 😅 Nice job and idea though !
@jorgebiase3348
10 ай бұрын
AMEIZING
@ThomasCustomWoodworks
10 ай бұрын
Thank you!
@mahendrarajaharumugam9159
11 ай бұрын
Yes I can Do this bench👏🫵😃🫡🇨🇦
@manchitaaguilar3547
Жыл бұрын
Muy ingenioso
@ThomasCustomWoodworks
Жыл бұрын
Thank you!
@mahfoud514
2 ай бұрын
Bonne idée mai un peus compliqué
@ConectadosHoje
11 ай бұрын
Perfeito 👌
@AntonioSilva-zk3if
Жыл бұрын
Top a ideia
@user-hm9fv9xk7x
10 ай бұрын
That would be the most useless thing for my workbench to do, it is literally never cleared XD
@ShivamSharma-zd8lw
6 ай бұрын
haha i agree
@tomthompson7400
9 ай бұрын
a simple latch on the top bracket would make life a lot easier , like a garden gate latch
@abdullahjan8824
7 ай бұрын
Ketny ka he
@tomthompson7400
7 ай бұрын
@@abdullahjan8824 probably
@Nusremmus
6 ай бұрын
I dig it, but I'd try to work a french cleat in there somehow . LOL
@goranhinic9242
6 ай бұрын
Seem like it would be a bit wobble without any diagonal bracing, no? Can you open it and move it side to side?
@jerryklooster438
11 ай бұрын
Wait. Before I start I have to reassemble my work bench...again.
@Ricky-eg3wd
Жыл бұрын
Very nicee
@ThomasCustomWoodworks
Жыл бұрын
Thank you!
@linamulina5716
10 ай бұрын
Bisa juga buat tempat tidur juga kl ya
@aaronag7876
10 ай бұрын
With the 2 black bolts at the top, could you not have used the table legs support beam, the one you put and rest on the top of the table, after putting the table on the wall ? Use the support beam in a way to hold the table onto the wall, seeing as it is wide and would require a few wooden twist wedges to hold the beam. Just seems 2 little bolts are not strong enough and the weight of the table will pull them off the wall
@ZZZ-qy8wj
10 ай бұрын
Let's see how that works out for you as you get older. The best inventions are the ones where even a senior citizen can use it or do it.
@buildandbescene
Ай бұрын
Seen these! Wanted to do one but my bench space changes so much
@cgifly2
11 ай бұрын
Its very cool but whats the point? I am not being mean.what do you need the space for? when its up if you store stuff there you have to move it anyway as opposed to just leaving it there. In my shop wall space is the premium.
Пікірлер: 242