Good full take down. Maybe do part 2 for complete reassembly? Reverse engineering is not so easy for some of us. thanks
@petergloria5247
3 жыл бұрын
Great video and explanation. I agree with the reassemble video. 👍🏽👍🏽
@charlesdavaro8554
2 жыл бұрын
Best take TPSFX take down video I have come across Great job
@TrinityRolling
4 жыл бұрын
Great video! Lots of information for the disassembly of this and other Canik TP9s.
@TacticalAdv
4 жыл бұрын
Thanks, hope it helps
@lemonman1
22 күн бұрын
Thank you!
@HaggoPoppinz
11 күн бұрын
Great video Bro💪🏽 Qik question. What magwell is that? 🤔
@JerryLee..
3 жыл бұрын
Awesome video man. It makes me feel better about considering a TP9.
@firestarter3095
2 жыл бұрын
Good video and great tips 🍻🤙🏼🇺🇲⚡🇺🇲⚡🇺🇲⚡
@Gunnypauly73
3 жыл бұрын
Thanks for the tips !!
@Rickmaki
2 жыл бұрын
Question: TP9SFX the extractor spring. I pulled out the extractor and the spring fell out before i could see which way it was in. There's a smaller hole on one side. Which way does it go in, with the smaller hole facing out that the dimple on the extractor arm fits in or does the bigger hole fit into the extractor arm ?
@ABiblicalView
2 жыл бұрын
I'm wondering if I could Dremel out a thumb place on the support hand side
@BURNSL0W3
6 ай бұрын
Is this most necessary or can I get away with a regular cleaning???
@warrenrosen132
3 ай бұрын
What contact surface limits,the,forward movement of the striker?
@Rickmaki
4 жыл бұрын
What size punch is that you used for taking down the slide lock pin (the vertical pin) I need to get one, all my punch's are too big
@TacticalAdv
4 жыл бұрын
1/16th i believe
@michael7324
3 жыл бұрын
Harbor Freight has a set for cheap...
@johnrodwell2281
2 жыл бұрын
Ever figure out the accuracy issue that started the disassembly in the first place? I've got an Elite Combat that's approaching 10k~, and while I haven't had so much as a hiccup, I am curious if you figured out the gun's issue?
@jonathanschmidt417
2 жыл бұрын
Caniks don't have issues it's the only gun that Chuck Norris fears and has nightmares in his sleep and makes is his 45s quiver in shear terror
@SOSdoorgunner69
4 жыл бұрын
How can we send mesaages to you directly? just in case we see something that does not make sense to us? thanks again
@vinny5727
3 жыл бұрын
Nice vid, but your explaining this like everybody who’s watching has been doing this for 10 years. Lmao I’ve never disassembled a gun before and your just like “alright pop this off, slide this back boom boom there we go, next” 😂 like wait slow down man
@diegoabreu6548
3 жыл бұрын
Same! My first reaction was like "OK, slow down guy!"
@deussanguinius4263
3 жыл бұрын
Videos also labeled full disassembly and he doesn't fully disassemble it hahaha
@mytquin7605
4 жыл бұрын
the dreaded roll pin is definitely a poorly designed part of the gun
@TacticalAdv
4 жыл бұрын
Yup, kinda a pain, thanks for watching and commenting!
@minjin0259
3 жыл бұрын
@@TacticalAdv I took a small drill bit and put a relief cut in the frame just below the hole for the roll pin. Some 2000 grit sandpaper and it looks like it is factory. Now I can use a normal roll pin and just push it out in about 2 seconds.
Пікірлер: 27