the last three times I've asked KZitem how to do something it was your videos that answered it. Thank you and keep up the good work
@MichaelJohnsonProductions
2 жыл бұрын
That’s pretty cool. Honestly I dont mind the little views as long as when someone watches the video they get the answer they are looking for. Just shot a video last night Titled “Canon C70 with the DJI Ronin S. A lot of people are searching to see if that gimbal will work with the Canon C70 and there is not a lot of videos so in the video I show everyone how to get a good balance and make it work with the DJI Ronin S.
@silvestrossouthernitaly9795
2 жыл бұрын
@@MichaelJohnsonProductions I needed a counterweight for exactly those two, together. There is a 50 Euro weight for sale on Amazon but I used heavy clamps as a counterweight. Works and I saved 50 euro. And you need to remove the handle strap
@MichaelJohnsonProductions
2 жыл бұрын
Haha that is crazy. Im sure you seen the video by now but pretty freaking cool.
@davebeck8973
3 жыл бұрын
Hey ya Michael Hope all is well. I'm sure your out filming or with the family. Have a great time. Don't over do it in that Florida heat!
@MichaelJohnsonProductions
3 жыл бұрын
Hey Dave. Thanks for reaching out :) All is well. Just been extremely busy shooting and editing. Haven’t had time to shoot a KZitem video. I guess it is a good problem to have. But I have so many ideas but dont have the time to share it. Thanks for the support :)
@davebeck8973
3 жыл бұрын
I would have to buy a nice camera as you have now. Good the fact it's paying for itself in use. Your turning into a real pro since I first came across you. Great presentation Michael.
@MichaelJohnsonProductions
3 жыл бұрын
Thank you Dave for the awesome compliment. Yes this camera is a true work horse and definitely paying for itself. Thanks for watching I really appreciate it :)
@cristiantoma1500
3 жыл бұрын
No need for 48V phantom power when you actually get line in signal from receivers.
@esther_wright
Жыл бұрын
Thank you
@Roman.the.explorer
Жыл бұрын
Thanks for the video man
@MrJHCAMPBELL
2 жыл бұрын
Awesome thanks.
@MichaelJohnsonProductions
2 жыл бұрын
Glad it helped :)
@iEditProjects
Жыл бұрын
You my friend are a true rockstar!! We have identical equipment. Getting ready for a Red Carpet this weekend and the C70 is up for action. Great post!
@MichaelJohnsonProductions
Жыл бұрын
Kill it my friend
@bashmedia
2 жыл бұрын
thanks
@MichaelJohnsonProductions
2 жыл бұрын
You're welcome!
@TheFedericogalli
5 ай бұрын
Thank you really helpful
@OB_shredder
Жыл бұрын
Looks like your channel 3 to the Rodelink lav was set to +48 which is probably why it wasn’t working. I was looking for an xlr to 3.5 solution so thanks! Totally gonna pick those up!
@scottievee7467
3 жыл бұрын
Isn't 3 and 4 just a left and right? Technically only 3 channels? Not sure how you got 4 but that's cool. Good stuff! Thanks.
@MichaelJohnsonProductions
3 жыл бұрын
Yes a left and right that can be separated. Use it all the time and it works great. Thanks for watching
@ElayneOkaya
3 жыл бұрын
Is the 3.5 channel joined with the inbuilt camera?
@MichaelJohnsonProductions
3 жыл бұрын
Yes it is. Great question though
@ElayneOkaya
3 жыл бұрын
@@MichaelJohnsonProductions thanks a lot for the feedback. How clean is that audio in outdoor filming conditions? I ask because I just got a rather pricey cable that takes audio from the Rode Wireless Go II receiver into the two mini XLR ports to avoid the possibility of capturing excessive wind noise through the camera’s inbuilt mics/3.5mm jack.
@MichaelJohnsonProductions
3 жыл бұрын
If you are using a label microphone like I do the audio is really clean and you have no problems. If you are using the built in audio that’s not going to be the greatest. But that’s for every camera.
@ElayneOkaya
3 жыл бұрын
@@MichaelJohnsonProductions noted. Thanks. 🙂
@hyunseoklee8611
2 жыл бұрын
Hi Michael! This was super helpful content. I have a question tho. Why 3.5 channel is getting mixed with built-in mic?
@leonaloveish
2 жыл бұрын
Pls help,once I plugged my rode mic my audio is grayed out in my camera😟I can’t even access the inbuilt audio at all,everything is grayed out.
@MichaelJohnsonProductions
2 жыл бұрын
Send me email at johnsondrummer@gmail.com
@oscarm4154
Жыл бұрын
My built In mics have ok level for input. Now sending video feed via HDMI video is OK but not receiving any audio via HDMI. Does the C70 not send audio via HDMI? Thank you
@DevotedMediaGroup
2 жыл бұрын
Thank you! Very helpful
@MichaelJohnsonProductions
2 жыл бұрын
Glad it was helpful!
@geovannyflores
2 жыл бұрын
I get really bad audio from my mic input so I use my r6 for interviews instead.
@MichaelJohnsonProductions
2 жыл бұрын
Wow you might want to get that checked out. Might be a bad mic input. I get great audio from mine. Since you payed all of that money you might want to send it back and get it repaired.
@geovannyflores
2 жыл бұрын
@@MichaelJohnsonProductions thank you for the reply, level always shows really good but when I listen to it it’s either to low or to hot
@MichaelJohnsonProductions
2 жыл бұрын
Yeah would highly recommend sending to Canon. They will take care of you with no worries. Customer support is great.
@struggletostrengthpodcast
2 жыл бұрын
For some reason i can't figure out how to control the audio levels of the mic input, I can hook it in and get both mics playing but they're super loud and I can't change the volume, any advice?
@MichaelJohnsonProductions
2 жыл бұрын
Hmmm thats not good. If you know what your doing and get get it resolved it might be time to call Canon. They have a number that is specifically made for the EOS Cinema Line.
@dglatz01
3 жыл бұрын
OK that was a very useful video. Well done. Sub'd too.
@MichaelJohnsonProductions
3 жыл бұрын
Thank you. Glad it was helpful. That’s the goal of these videos. Thanks for watching :)
@ClarkeeClarkee
2 жыл бұрын
What settings do you use for your Go II, im having a lot of issues with hissing and my Go II's and C70?
@MichaelJohnsonProductions
2 жыл бұрын
Really? Hmmm have you tried doing the firmware update? I had a little issue like that in the beginning which i mention in one of my videos and the firmware fixed it
@ClarkeeClarkee
2 жыл бұрын
@@MichaelJohnsonProductions yeah. It’s all up to date.
@MichaelJohnsonProductions
2 жыл бұрын
Okay email me at johnsondrummer@gmail.com
@BrocknNoobz
Жыл бұрын
I know this has been a while ago, but I'm having a similar issue where I'm getting a lot of noise with my Go II's with my C70 and I can't seem to figure out how to get rid of it. Any chance you fixed it and remember how?
@ClarkeeClarkee
Жыл бұрын
@@BrocknNoobz the solution for me was to turn off the channels I wasn’t using in post.
@silvestrossouthernitaly9795
2 жыл бұрын
i have a rode condenser into channel one but I can't seem to get the camera to register the rode Go2 into channel 3 and 4. Any insights?
Пікірлер: 51