Do you know how to replace the lcd screen? Im having issues doing it myself.
@GrimwoodWatchModding
2 жыл бұрын
Is there any manuals showing exploded views of the M50. Might need to repair one and always find it more useful looking over exploded views before hand to get an idea of whats involved. This video however is very handy :)
@imaheka
2 жыл бұрын
Hi Pavel, I would like to know if that white hexagonal thing on m50's main board is that the internal battery? If so, do you have any idea what kind of a battery it is? Thanks
@pavelantoniadi8339
2 жыл бұрын
Hello. Yes, it is the battery. UT614 button cell. 6.8mm x 1.4 mm 3v. You can try to find analogs: MS614S or another 614 battery Panasonic ML-614 battery works well, for example
@abelaguirre7725
6 ай бұрын
Does that battery take the surge in the event it was connected to a power source greater then the recommended voltage or is the PCB need to be replaced ?
@colorfulcollage
4 ай бұрын
Yikes! I came here to learn how to change the clock battery (the date/time keeps needing to be reset each time I turn on the camera), but after seeing this I think I'll just reset the time each time I power on.
@CarsonClayOfficial
Ай бұрын
i feel your pain
@GucksTV
3 жыл бұрын
hey! Nice you've done a full teardown...I've dropped my M50 and had a Quick-Release-Plate mounted, the Cam is completely fine but the bottem where the 1/4 threadding is located got broke. I was asking myself if you can remove that part of housing and the threaded part without getting to the electrical core components. Is the threaded anchor point fixed to everything or removable behind the housing?
@pavelantoniadi8339
3 жыл бұрын
Hello. If I understand the problem correctly, you need to remove the part that falls on the table on 1:56? It removable behind the housing. You need to try operations from 0:00 to 0:34. Be careful with the flex cable on 0:33 (it's easy to rip) Then try from 1:30 to 1:57. Threaded anchor holds one screw. That's it
@GucksTV
3 жыл бұрын
@@pavelantoniadi8339 wow! I've missed that part! :D amazing! Glad I've asked and thankful you could help! Thanks!
@pavelantoniadi8339
3 жыл бұрын
@@GucksTV you are welcome!)
@michaeltylermedia
3 жыл бұрын
I totally am in the process of replacing the threaded screw as well. How do you put back the flex cable? Please tell me there’s a way!
@asianlodi5282
3 ай бұрын
hello, can you help me where I can purchase HMDI mini parts for M50
@JoelIgene
2 жыл бұрын
Thanks for this, the micro hdmi port on my m50 is not functioning properly, tried finding the part online and can't find it...can you link me to where I can buy that part to replace on my camera?
@AdventuresInSkateboarding
Жыл бұрын
So pay someone to replace my messed up mic jack. Got it. 😂
@andreasforer3556
2 жыл бұрын
Hey Pavel, thank you for your video! I opened my m50 and the battery door switch was missing. I soldered it, but then i realized that the capacitor just to the right is missing too. Do you have any idea what its capacity is? Or do you know where I can find out?
@pavelantoniadi8339
2 жыл бұрын
Hello. unfortunately I have no idea what this capacitor is. Show me a photo, I'll try to find out.
@andreasforer3556
2 жыл бұрын
@@pavelantoniadi8339 Of course, how can I contact you? Do you have an e-mail address?
@pavelantoniadi8339
2 жыл бұрын
@@andreasforer3556 cj-ejay@bk.ru
@unamusedbryson
2 жыл бұрын
Do you know what could be wrong if my m50 crashes every few minutes or so? Would I probably need to replace the main board?
@Bunta1987qwerty
Жыл бұрын
Sounds like overheating or bad firmware
@siddhantsrivastava8599
4 жыл бұрын
Nice one mate
@pavelantoniadi8339
4 жыл бұрын
You are welcome
@pablodanieldominguezdelang2905
8 ай бұрын
How can i find the display :c
@creativeedgemediaproduction
2 жыл бұрын
My m50 screen has go blank, people said is the flex on the camera, Can I fix this?
@SWMDAjaxRacing
5 ай бұрын
Hello, I have an issue were nothing powers on, no sign of life at all but I can hear like a hisssing noise, it's like a capacitor has failed and is venting. I noticed there was a capacitor in the front of the camera, would replacing this potentially fix the issue?
@nahueljo
2 ай бұрын
The capacitor you're mentioning is for the flash unit. I doubt it has anything to do with powering on. Hope you can fix it!
@adrijus2390
Жыл бұрын
Hi, my viewfinder glass is cracked. Any chance you remember if that piece comes with a glass or if the glass is attached to the electronic viewfinder unit? 2:44
@pavelantoniadi8339
Жыл бұрын
Hi. Glass is part of the viewfinder
@Ridetheflow
3 жыл бұрын
How do you fix stuck shutter? Getting error 20
@GazInTheBackground
3 жыл бұрын
Did you figure out how to remove the actual LCD panel from inside the housing? I have the screen removed to try and replace mine as iit's broken, but it looks as if the glass has to be removed to remove the LCd panel.
@GazInTheBackground
3 жыл бұрын
I managed to do it. It does indeed need to be heated up and pried from the glass side. Awful design on that front.
@pavelantoniadi8339
3 жыл бұрын
@@GazInTheBackground yes, the screen is glued. I'm glad you managed to change it :)
@meera6700
3 жыл бұрын
Hi, love the vid! My touchscreen is not working. Is there anything I cld do or open up and tighten to maybe fix this? Cld the wiring be affected in this case?
@pavelantoniadi8339
3 жыл бұрын
Hello. let me know the screen does not show an image? or is the sensor not responding? did you drop your camera before that?
@josht2151
3 жыл бұрын
I have had the same issue my screen has gone blank but responds (beeps) when you touch the screen. I have checked the settings through the view finder and it doesn’t appear to be the main sensor problem people speak of. The screen just remains blank but still beeps. Any advise would be great!
@teefishes
2 жыл бұрын
Please help 🙏 I dropped my m50 and the audio port only works when I hold an audio jack from my external mic in place. Once I let go, it goes back to the internal mic and it's impossible to use the external mic. I've tried using other mics and it am certain it's the m50s audio port. I noticed you pulled the audio port side last, but wanted to know if you can fix this problem without disassembling everything? Thank you and any response is greatly appreciated!
@pavelantoniadi8339
2 жыл бұрын
Hello. You will have to disassemble the camera until 3:35 to remove the audio port. Maybe it will be possible to do it earlier, I do not remember such nuances. Anyway you need to remove the audio port and solder the contacts or replace it completely
@mikevaroke21
2 жыл бұрын
Thanks for they video man, bye they way, do You know where can i order a new shutter for this model? I live in México.
@pavelantoniadi8339
2 жыл бұрын
Hello. You can find it on Ebay or Aliexpress for example alii.pub/67yrlp Here are some tips for replacing the shutter: You need to remove the matrix. It is held in place by three screws. On each screw you need to make marks and count the number of revolutions when unscrewing. Then change the shutter. There should be no problem here. Now the most important step is to put the matrix back in place. how many turns were there when unscrewing the screws? The same amount is needed when tightening the screw. The marks on the screws should line up. It is important!
@EliyaArt
2 жыл бұрын
thanks for sharing. whats tipe battery bios m50 bro ? thx before
@pavelantoniadi8339
2 жыл бұрын
It is UT614 button cell. 6.8mm x 1.4 mm. Try to find analogs: MS614S or another 614 battery
@2darki
2 жыл бұрын
my usb-port stopped working, so i cant use it as a webcam anymore. If i apply some force to the usb, it still kinda works and the pins in the port look fine. Should i try to resolder it?
@pavelantoniadi8339
2 жыл бұрын
Yes you should try. Most often soldering is broken on the connector and it stop working
@greigmccarter789
2 жыл бұрын
I think I got some dirt under the off/on switch and it is really stiff to toggle. I had rock dust on my wet hands when trying to record the slicing of some stones. Do you know how to remove the off/on so I can clean it?
@pavelantoniadi8339
2 жыл бұрын
Well. Yes it is possible but you will have to remove the top of the camera(operations from the beginning of the video to 2:54). Then you need to remove the switch. This is a complex operation that requires caution. You have to work with small details. but nothing is impossible
@greigmccarter789
2 жыл бұрын
@@pavelantoniadi8339 Thanks for the quick reply
@keshavnaick9778
3 жыл бұрын
is there a way to get to the back of the sensor without taking the whole thing apart?
@pavelantoniadi8339
3 жыл бұрын
No, i don't think so. In most cameras, to get to the sensor, you need to completely disassemble it
@hopkinsd33
2 жыл бұрын
Hello, great video , would this be the same as a m50 mk2, as I need to replace a shutter
@rivergate950
Жыл бұрын
yes the 2 cameras are basically the same with only a firmware and badge difference
@nikfizri
3 жыл бұрын
my m50 doesn't turn at all no matter what i did. new battery swap, took of lens and battery overnight, switch out mmc, doesn't do anything. do you have any idea what could be the problem? yes the camera does fell on the floor before this but really super light fall and i haven't had any issue since. up until one day it just started to show the sign. sometimes ok sometimes not then totally dead.
@pavelantoniadi8339
3 жыл бұрын
Hello. I don't know what exactly the problem is, but the first thing I would check is the battery door switch.
@nikfizri
3 жыл бұрын
@@pavelantoniadi8339 i did some few methods and it works but the same problem keeps happening again whenever i left the battery inside the camera for a moment. In your video at 1:57 is that some kind of internal battery or capacitor(blue)? i read in a forum that it might had to do something with it and is it replaceable?
@pavelantoniadi8339
3 жыл бұрын
@@nikfizri what methods have helped you? This is flash capacitor at 1:57. I think it can be changed. You need to look at the parameters on his body and buy the same. But you need to know how to work with capacitors! be careful
@nikfizri
3 жыл бұрын
@@pavelantoniadi8339 the one method that works is take off the battery and sd card, set the mode dial to P, switch it on and press the shutter button for at least 15 seconds then switch it off, put the battery and sd card and switch on and walla, its alive. But if i switch it off and leave it for few minutes then try to switch it on again, it completely dead again and the method wouldn’t work again unless I took off the lens and battery, left it overnight and try again day after. It may or may not work and yeah, it took me more than a week to somehow figure it out.
@ksy5290
Жыл бұрын
Is the sd card reader slot soldered onto the main board?
@pavelantoniadi8339
Жыл бұрын
Yes it is
@majidhussainraza2801
3 жыл бұрын
Hi Pavel I dropped my M50 and after that the lcd is not working but I can view in the viewfinder it works fine and also recording is good. Can you suggest something please.
@pavelantoniadi8339
3 жыл бұрын
Hello. Same problem has already been discussed in the comments. Here's what can help you, it helped another user: If the display is not broken, most likely the connector 0:40 does not fit snugly. Try to push it. If you have a screwdriver and a little experience you can solve it at home. but be careful with the plume that comes out 0:33. Good luck
@majidhussainraza2801
3 жыл бұрын
@@pavelantoniadi8339 Thanks Pavel I really appreciate the help!
@Deepak_chkd
Жыл бұрын
Nice
@valikvlog4973
2 жыл бұрын
Thank you.
@Bigjuergo
3 жыл бұрын
nice vid! do you also repair m50s? i dropped mine since then display does not work. display has no scratches. maybe connection problem.
@pavelantoniadi8339
3 жыл бұрын
Hello. I faced the same problem once. If the display is not broken, most likely the connector 0:40 does not fit snugly. Try to push it. If you have a screwdriver and a little experience you can solve it at home. but be careful with the plume that comes out 0:33. Good luck
@Bigjuergo
3 жыл бұрын
@@pavelantoniadi8339 i opened the m50, the cable looked okay, I unplugged it and plugged it back and now the display works again :-) do you habe paypal? i send you a coffee.
@pavelantoniadi8339
3 жыл бұрын
@@Bigjuergo glad to hear that! thank you very much. best regards! cj-ejay@bk.ru
@shankarlalsinwer5473
Жыл бұрын
@@pavelantoniadi8339 hi
@organicproduced
2 жыл бұрын
Hi. My m50 got caught in the rain 4 months ago sitting outside in a lawn chair for about an hour. Do you think it's still repairable?
@pavelantoniadi8339
2 жыл бұрын
Hello. After getting wet, you need to disassemble and dry the camera as soon as possible. 4 months is a lot. the worst has already happened. Without disassembly, not sure of the result. but most likely it will have to be sold for parts
@organicproduced
2 жыл бұрын
@@pavelantoniadi8339 thank you for the quick respond. I had a feeling like it's too late to save it but i wanted your opinion. Thanks again!
@pavelantoniadi8339
2 жыл бұрын
@@organicproduced Don't jump to conclusions ahead of time. In any case, you must try to save it! Good Luck!)
@organicproduced
2 жыл бұрын
@@pavelantoniadi8339 thanks. By the way, where can i find the same tools you used in the video. Maybe I'll try to save it myself... maybe not lol but i would like to at least open it up just to see.
@yatendrasingh4303
3 жыл бұрын
Hi, I'm facing issue in creating a wifi connection with my mobile, actually M50 gets stuck while creating the SSID, and I have to turn OFF the camera and turn back ON to use it for shooting images. But wifi connection isn't getting established, please can you suggest something.
@jeffluna5777
2 жыл бұрын
i came here because my meny button decided not to work
@deathstarkit
3 жыл бұрын
nice to see solid metal frame chassis inside.
@bambamtherapist
6 ай бұрын
I'm trying to get my screen to work again. It fell on a carpeted floor of all things and now the screen doesnt work at all. I am guessing I dislodged a connector. Does that sound feasible and do i have to tear the camera down all the way to access the connectors to plug them back in?
@pavelantoniadi8339
6 ай бұрын
Hello. Please read the comments, we have already discussed how to solve this problem. Best regards
@vladrodideal1972
Жыл бұрын
Hey Pavel I was taking some photos with my M50 and all of a sudden it turned off ,ever since that it hasnt turned on, but sometimes when I turn it on or off the led light turns really fast. It also makes a weird clicking noise when I turn the switch to on.And the aperture blades move around too when its on. Besides tha there's no sign of life . Do you have a clue on what the problem could be? Thanks.
@rubabmubarrat
2 жыл бұрын
Hey, My M50 resets the date and time everytime it's battery is taken out and I think that's caused by the dead cmos battery inside. Is there any way I can replace it?
@kawinewmai
3 жыл бұрын
Nicely done dude . My m50 is dead . New battery didn’t solve it . Can’t it be the motherboard or fuse ? What can be the potential problem ?
@pavelantoniadi8339
3 жыл бұрын
The first thing to look out for is the microswitch of the battery door cover. Then you need to check the fuses and whether power is supplied to the board. Remember without tools and minimal skills it is better not to try to repair the camera
@shedtime_au
Жыл бұрын
Useful, but I could have done without the noise. Where does one find such nice tools though? I've never seen them.
@IkambaDeVictoire
Жыл бұрын
He disassembled everything BUT the screen ... what I've been looking endlessly for, for THIS model. 😢
@pavelantoniadi8339
Жыл бұрын
Hello. The screen is glued. You can find a new one on ebay or aliexpress
@IkambaDeVictoire
Жыл бұрын
@@pavelantoniadi8339 oh thank you for your reply my friend!!! Maybe you can do a video on how to reinstall it sometime? I prayed durinf the whole process and Holy Spirit gave me insight and helped me figure out how to take it apart and instal a new one! (There were no videos or instructions anywhere, so I was sooo thankful for this 🙌🏿). I have light now, but no picture. Just a white screen. The camera still records, and my old screen had lines through it, so I was pretty sure it was the screen that was broke. Do you know what could be the problem? Maybe I installed something wrong??? One of the ribbons?
@realchristopher4334
Жыл бұрын
OMFAG! WTF! Incredible! Amazing!
@seewhatisaw
4 жыл бұрын
My M50 stopped working because the micro switch that gets activated when the battery door is closed is broken, that little black lever that is sticking out under the SD card slot @ 5:04. I don't know if it can be replaced, and if so is there an easier way to get to it or do I have to do what you've done and take the whole camera apart. Thanks.
@pavelantoniadi8339
3 жыл бұрын
I think it can be replaced. But the camera will have to be disassembled at least until this moment 3:34. Otherwise you won't get to him. But you have another option if you know how to solder. Just remove the switch and the camera will turn on, even with the battery cover open. You make it at your own risk
@seewhatisaw
3 жыл бұрын
@@pavelantoniadi8339 Thanks for the reply. That's what I wanted to do, solder where the switch is.
@seewhatisaw
3 жыл бұрын
@@pavelantoniadi8339 I soldered where the switch was and still the camera won't turn on. Any idea where the problem could be.
@pavelantoniadi8339
3 жыл бұрын
@@seewhatisaw well did you remove the switch completely or not? The switch is normally closed when door is open. You can check this with a multimeter. maybe the problem is not in the switch but deeper
@FreeLifeExplore
4 жыл бұрын
How to remove M50 eyecup
@pavelantoniadi8339
4 жыл бұрын
Hello. To remove the eyecup, pull it towards you and slightly up (you need to make an effort). But you can't take eyecup off without disassembling camera. The screw holds it.
@taraksimo7894
3 жыл бұрын
So interested video! My M50 dropped on the floor and the display is black and shows nothing and the the viewfinder sensor is out of adjustment and not working properly, the expert told me that the motherboard is fine but the display is dead so I bought a new one and still the same thing not working, so I searched and found an information that it coud be the graphic chipset is dead, so I ask what could be the problem related to the display ?? Thank you.
@pavelantoniadi8339
3 жыл бұрын
Well, the version about the dead chipset looks like the truth. But I do not presume to say it 100%. Did not face such problem.
@kudzie8627
2 жыл бұрын
Are you selling the dead M50 for spares
@kudzie8627
3 жыл бұрын
Please help ,The menu button on my M50 is not responding, after the camera got soaked with water .. i have be told i have to replace the motherboard that controls that section . Is it possible to buy the circuit board from Ali express and replace the faulty one Thanks
@pavelantoniadi8339
3 жыл бұрын
Hello. Yes you can buy it on ali: alii.pub/5wo003 But first, I recommend disassembling the camera and examining this board. Wash with isopropyl alcohol. It might work
@kudzie8627
3 жыл бұрын
@@pavelantoniadi8339 thank you soo much
@messylaura
3 жыл бұрын
have you or can you make a vid showing the shutter mech replacement?
@pavelantoniadi8339
3 жыл бұрын
I had a video but I can't find it. I will try to describe in detail: the camera needs to be disassembled as in the video. After that, you need to remove the matrix. It is held in place by three screws. On each screw you need to make marks and count the number of revolutions when unscrewing. Then change the shutter. There should be no problem here. Now the most important step is to put the matrix back in place. how many turns were there when unscrewing the screws? The same amount is needed when tightening the screw. The marks on the screws should line up. It is important! Now assemble the camera.
@pract1ceisst
3 жыл бұрын
Hi, My M50 got clock memory issue, when the battery is out about 3-5 mins, the date will be lost , which parts on camera is for memory clock? Is the capacitor shows on video 2:00 for memory clock? thanks
@pavelantoniadi8339
3 жыл бұрын
Hello. The capacitor shown on video 2:00 for flash :) There is a battery on motherboard for the memory clock. You can see it from 3:34
@pract1ceisst
3 жыл бұрын
@@pavelantoniadi8339 Do you mean bottom left of Motherboard? Is it a button cell? what's the model / size of the battery? Thanks
@pavelantoniadi8339
3 жыл бұрын
@@pract1ceisst Yes, bottom left of Motherboard. It is UT614 button cell. 6.8mm x 1.4 mm
@pract1ceisst
3 жыл бұрын
@@pavelantoniadi8339 So grateful to you for the answer! That battery seems not easy to buy lol ...
@pavelantoniadi8339
3 жыл бұрын
@@pract1ceisst try to find analogs: MS614S or another 614 battery. Good luck :)
Пікірлер: 108