Printer Cleaning Kit - Get Yours Now & SAVE $! [CLICK THIS LINK] 👉 geni.us/wArXsZT Expedited Support 👉 geni.us/BPChannelMember
@EdwardsStreet603
Жыл бұрын
Thank you for this video. I did not have your cleaning kit available so I used cleaning vinegar and just a syringe. It worked. I went from no yellow or cyan and everything printing in pink back to normal. THANK YOU
@kathyparent-lew3997
Ай бұрын
Thanks sooo much. this fixed my yellow. It was absolutely BROWN when I pushed the solution thru!!!! I couldn't believe it. I haven't had yellow in my Print head line in a while so it just sat there and went bad. You are great!!! Canon told me on the phone that my printer had a "Hardware Issue" and needed to be replaced! NO, no, no!
@BestPrinters
Ай бұрын
Excellent!
@suzannex3414
2 жыл бұрын
This worked on my Canon G6020. My initial nozzle check showed nothing on the cyan and yellow lines. I used a little less than half a bottle of the cleaning fluid on those two colours, and then I ran another nozzle check. This one showed a very faint cyan and yellow and no magenta (I had not run any fluid through magenta). After running a cleaning and deep cleaning, a third nozzle check showed a slight improvement on the cyan. So I did the ink flush. Although it did use a lot of ink, it didn't use as much ink as I had thought it would. A fourth nozzle check shows all colours back to normal. I'm very happy to have found this video and to have saved myself the cost of a new printer and ink!
@Bonjour-World
3 жыл бұрын
That "Ink FlusH" fills up the waste pad(s). How do you replace them and reset the counter on this printer?
@TallyTechandTroubleshooting
5 ай бұрын
Product worked flawlessly on one of my customers' printer (print head was nicely cleaned out). Unfortunately, I had a feeling there was a bigger issue that has been the topic on many tech repair forums involving this Canon printer. Black ink was not being drawn to through the distribution tube. After closer inspection, air bubbles were evident. I will be keeping a couple of these in my inventory for the future though. Great product and excellent walk-through, my brother! Take care!!
@BestPrinters
5 ай бұрын
I'm glad this video was a good resource to you!
@lathersforlife7389
Жыл бұрын
Thank you. I just purchased the kit at your recommendation. Your video is user-friendly, and I appreciate it. I hope it goes well. I have confidence I can do this. I need my printer to work for soap label AND mailing labels. I didn't expect my printer to just stop printing this morning when there is still lots of ink left...
@lapinott
3 жыл бұрын
Hi! To stop the cartridge, i think it's better not to 'hand it', but just push 'STOP' button 5 secondes and the cartridge will come to center and stop alone. ;) Have a good day! :)
@bill1772
2 жыл бұрын
Thank you, I did NOT know I could grab the sliding head; I just watched it go back and forth. Great informative video Brandon
@BestPrinters
2 жыл бұрын
You're welcome!
@mijolobo
Жыл бұрын
Happy New Year and thank you for this guide! I have a Canon Pixma G5020 and it was bothering me that there didn't appear to be anything about this printer on KZitem after finding my colors weren't printing. I realized this video was close enough to pay attention to it. Ordered the Printhead Cleaning Kit and followed the steps only to learn I needed to perform the Ink Flush. Originally thought I was going to have to wait anywhere from the 6th till the 9th this month when surprised Amazon told me it was coming NYE! It did, yay! Just filled the tanks, ran the Ink Flush, and back in business. Thank you!
@BestPrinters
Жыл бұрын
That is great news, thank you for sharing!
@Lauren-tk1gq
2 жыл бұрын
Thank you so much for making this video! I never have been technology savvy. I just purchased the cleaning kit in hopes of fixing the awful printing of the inks
@BestPrinters
2 жыл бұрын
Awesome, let me know how it goes!
@lutherkindle5799
4 жыл бұрын
Very good prevention, thinking of buying this printer, but would like to know if it will print cds ? Thanks for being so helpful,
@darcie56
2 жыл бұрын
This kit works ! Saved my Cannon 6020. The kit is worth every penny. Thank you !
@BestPrinters
2 жыл бұрын
Awesome!
@surfyogi
5 ай бұрын
Great video! Thanks for showing us how it's done. I guess I'll check my ink sponge in the back and dry it out too, after doing this? I would think this will just completely saturate the ink drain sponge? I keep alchohol and large syringes around, just for these fing printers, what a pain. My last canon only lasted 6 years, with carts, my moms even less time. I kept it limping along, but it seems they are NOT DESIGNED TO LAST, and that's how Canon wants it. I hope these new printers end up better; my G6020 is completely clogged after 2.5 years, deep cleaning does nothing for it; of course I rarely use it.. which is why there is a problem.
@BestPrinters
5 ай бұрын
If I could guess I believe these companies are gonna keep making printers that become obsolete sooner. That's how they make their money.
@nickditoro
2 жыл бұрын
Thank you so much for this video. I went from having no black results at all in a nozzle check to printing like new!
@BestPrinters
2 жыл бұрын
Happy to hear that! Consider leaving a 5 star review on Amazon and subscribing to my channel
@Grannyrides
2 жыл бұрын
Many thanks! Was ready to toss the printer out the window but this works and it prints like new.
@melbendigo
4 жыл бұрын
Very helpful! Thanks! Why do you need to use Ink Flush if you'd already flushed out the print heads with the solution? In the past after cleaning with a solution, I would just print a page of solid color to clean out the remaining solution, and it used much less ink and didn't add ink to the internal ink pads.
@BestPrinters
2 жыл бұрын
When you run a printhead cleaning its just to have the ink pushed back into the system.
@melbendigo
2 жыл бұрын
@@BestPrinters I see, thanks! In that case, it's probably just as good to print solid pages of each color, so as not to fill the waste reservoir.
@denahom
2 жыл бұрын
@@melbendigo This sounds like a better idea. How did you print out solid pages of each color?
@melbendigo
2 жыл бұрын
@@denahom Dena, I just saw your message, sorry so long to respond! Just open an image editing program (Photoshop, Gimp, etc.) and make an 8.5"x11" document, draw a box that fills to the margins and fill it with 100% of whichever color you want to print. Always leave a margin, 1/4" or so, to make sure ink doesn't get on your rollers.
@travelgirl3172
3 жыл бұрын
Thank you for this. I hate this printer. I have a 10 yr old canon at home and it still works well. We got this model for work and it clogs ALL THE TIME. Probably because it doesn't get used that much. I will never ever buy a printer with ink like this again. I had one years ago at another job and it was a constant battle as well. Can't remember the brand. I'd rather pay through the nose for ink cartridges than deal with this every time I want to print something! Great tutorial. Thanks again.
@no_peace
2 жыл бұрын
I have it too and I will never buy a tank printer again. I hate it so much. The prints have never looked good and all it gives me is trouble
@gertrudedaraklis1170
3 ай бұрын
7/5/24 what happens if you don’t do the flush at the end of the? I have a g7020 very similar to this and there is no replacement material/kit that soaks up all of the ink that’s used in the final step. Question 2- if I cleared the dried ink with your kit , why is the last step “ maintenance ink flush” required? I mean no disrespect or negative tone, I’m just trying to better understand . I’m concerned for where all that flushed ink goes. If the material in the back of the printer (let’s call it a sponge)gets saturated, the printer throws a code that to my understanding needs to be addressed by canon ( which defeats the whole DIY principle). Thanks Gerddy from Jersey
@ilonaramazanova6940
Жыл бұрын
Thanks! I had to do an ink flush afterwards, but now the colors are good as new.
@BestPrinters
Жыл бұрын
Welcome!
@rociovazquez6766
Жыл бұрын
Thank you!! I run an art business and this was so helpful!! 🙌🏼
@BestPrinters
Жыл бұрын
You're so welcome!
@tomhuster4700
2 жыл бұрын
Thank you! Huge help to restoring print quality!
@BestPrinters
2 жыл бұрын
Awesome!!
@vidalperegrina5119
11 күн бұрын
Thanks everything working like new after that cleaning method thanks
@BestPrinters
9 күн бұрын
Great to hear!
@djdsk
Жыл бұрын
Thank you your kit and method fixed my Pixma G6050, i wanted to ask where does the ink go during an ink flush? Do we need to empty a resevoir or anything?
@BestPrinters
Жыл бұрын
No need, it goes into an ink waste pad.
@djdsk
Жыл бұрын
@@BestPrinters does that waste pad need replacing?
@JimLuby-z2f
8 ай бұрын
Thanks for this helpful link. I'm curious to know where the ink used during a flush ends up.
@BestPrinters
8 ай бұрын
Hi, it ends up in a waste pad located within the printer.
@rabnesbit
Жыл бұрын
Very helpful. I understand why you might not want to share what is in the cleaning fluid but I applied a bit too much pressure and the tube came out and I got sprayed with the stuff so I would like to know if it is harmful.
@BestPrinters
Жыл бұрын
No it is not harmful just wash it off. I have submitted a sds sheet to Amazon. If you message me via Amazon I can send one over to you. The solution is water based.
@rotfan77
Ай бұрын
Before cleaning printed only a couple colors. I used to the cleaning kit suggested everything seems to work good except for the yellow still is not as good as it should be? Flush used about 1/4 of a color capacity.
@BestPrinters
Ай бұрын
I recommend topping off yellow and doing a system printhead cleaning.
@Bertminator
Жыл бұрын
This kind of confirms for me that laser is the way to go. They won't dry up because toner is already dry
@BestPrinters
Жыл бұрын
True!
@StDebb
Жыл бұрын
This process works well for me, but is there a way to get just the cleaning solution? I don't need to buy the whole kit every time I run out of solution!
@pj2123
26 күн бұрын
CAUTION. I tried this because our colour ink tanks are stained inside and we could not see that one was empty, it must have sat dry for a while. I must have used slightly too much pressure on the syringe as the fluid came out of a different colours nipple and not the jet end. A new head did fix the issue but they are not cheap to replace.
@BestPrinters
26 күн бұрын
Thanks for sharing.
@Diamondbittersweet
Жыл бұрын
Hi Brandon. I watched your video om cleaning the nozzle heads on the ink cartridges, but you also mentioned flushing. Do you recommend running a nozzle check after cleaning out the dried ink? Is flushing also necessary after completing the nozzle head cleaning? Lastly, where does the ink go during the flushing process? Does it empty out of the printer?
@BestPrinters
Жыл бұрын
Yes an ink flush will only help and the ink will go into a ink waste padl.
@janetharris9291
9 ай бұрын
The epson tank printers are being purchased by the crafting community to use sublimation ink. Please talk about that. Will that ink damage the printer
@BestPrinters
9 ай бұрын
No it wont unless you arent doing frequent maintenance.
@BornAgainCynic0086
Жыл бұрын
If the tubes/pipes are empty just run the IJ Printer Assistant Tool Ink Flush application.
@BestPrinters
Жыл бұрын
ok
@donnellabuxton3709
7 ай бұрын
Thank you the only thing I don't like is the ink flash as every time this is done you then end up with other issue as the sponge in back of the tank gets full and then it cause another major issue. These printers are full of issue. Cannon need to change modify these printers with ink emptying tanks too not a sponge.
@bananza1310
2 жыл бұрын
Hi there! I have a fairly new Canon Pixma G6020, but it's only printing with the red ink. Any advice?? Thanks so much!!
@BestPrinters
2 жыл бұрын
Yes you will want to clean the printhead, like I did in this video.
@omarperez9121
Жыл бұрын
Hello, great video. Can I do that if edible ink?
@BestPrinters
Жыл бұрын
Not reccomended.
@waynesevin7374
2 жыл бұрын
I am learning here! Where does the ink go after the flush? Is there something I need to change after this step?
@BestPrinters
2 жыл бұрын
The ink will go to the maintenance box ( an ink pad absorber).
@sotddrc.3372
4 жыл бұрын
Can you show me the waste ink box or absorber?
@BrendaMcG
3 жыл бұрын
good question
@Roadsurfer2k11
2 жыл бұрын
So many asked this question and printer guy didn't answer 🤔 smallbusiness.chron.com/clean-canon-ink-absorber-57609.html
@joeshmoe5935
2 жыл бұрын
Thanks for informing us. I plan on trying this kit. I'd like to point, I went to the cannon video on changing printheads and am wondering (A.) why don't you use their procedure to park the heads via the maintenance menu so we can pull out the print heads? Does this start some kind of a counter so that if old heads are returned the system will not want to work? (B.) the receptacle in the printer that accepts the waste ink from the purging and the cleaning and all that. When do we have to start worrying about that. Before I got to your video, I tried so many cleaning and purging cycles and what not to no avail, now I am worrying if I have that thing filled. Thanks for all the help.
@BestPrinters
2 жыл бұрын
Hi, I have always done my own method for stopping the printhead. I was not aware Canon had a video like that, I wouldnt be opposed to doing it their way. Also once the waste ink pads fill up you will be notified as to you replacing it. I hope this helps!
@joeshmoe5935
2 жыл бұрын
@@BestPrinters got tips on how to remove air from lines when they start getting empty. I see all the Hindu and Tagalog and Indonesian videos on how to do it, but they tell you to apply lock when sucking the ink. Don't get it.
@vincentdo4967
5 ай бұрын
Very nice instructions. Thank you!
@BestPrinters
5 ай бұрын
You are so welcome!
@kevingiocanti8801
4 жыл бұрын
This is really a good method, but in the end all the ink that has been used is there a recovery tank to empty which is filled with the used ink? If so is where? (sorry if the translation is approximate I don't speak English)
@keith3025
2 жыл бұрын
thanks for you video , i'm not sure this all worked for me, my system didn't print a nozzle check so i did clean each driver , and found the black was clogged, however i ran out of cleaning solution i will buy one more cleaning kit , my problem started by printing all blank sheets and for me thats frustrating because i'm wasn't sure where to start, I like the g6020 but I'm willing to have separate printers for each computer so i;d be willing to hear your ideas on a new printer for my mac , of course the g6020 is fairly new and i would like to clean it or just replace the drivers , we bought that one last year on amazon and print coupons with a HP with a terra bit to print coupons sadly to go to the grocery store.!
@BestPrinters
2 жыл бұрын
Hi Keith, after using the kit focus on running a printhead cleaning over and over until the color comes back 100%. Also keep your ink full during the whole process.
@mikejw58
3 жыл бұрын
OMG. I just bought one of these. What did I get myself into. UGH
@BestPrinters
2 жыл бұрын
Sorry
@rozettepeckham1157
Жыл бұрын
Thanks. So I am not sure what to do after cleaning the print heads. You mention ink flush and then it looks like video was edited and you mention, cleaning, deep cleaning and then ink flush. So do I clean and deep clean after I use the cleaning kit or do I automatically do ink flush after cleaning the print heads with the kit?
@BestPrinters
Жыл бұрын
Yes do an ink flush right after the kit cleaning.
@rparker120
4 жыл бұрын
Just made an order!
@BestPrinters
2 жыл бұрын
Awesome!
@HeidiPierovich
Жыл бұрын
How long does it take for the print heads to dry? The box says wait 24 hours but your video did not mention the amount of time.
@BestPrinters
Жыл бұрын
Yes let it dry for 24 hours.
@KickAssets
Жыл бұрын
Ink flush is such a scam. They charge a fortune for ink and each flush takes so much. What a scam. These companies really piss me off.
@BestPrinters
Жыл бұрын
I know.
@jenniferfletcher5425
Жыл бұрын
Your ink tubes have air in them though. So that is going to give you another issue. So if my black is causing smudges on the paper is this what I should do? I see that there are sponges in the printer, do those need to be cleaned as well?
@zakslife17
11 ай бұрын
Thanks so much! Just saved my printer 🎉
@mariasolis7311
4 жыл бұрын
Hi I need to know if you can help me how to adjust the colors on mega tank because the red is not too red and the purple is blue and it is new printer can you help me please ??
@adamszwarc56
Жыл бұрын
Hi, just bought your print head cleaning kit, however, the color print head is not getting any ink from the color reservoir. How does the ink get pumped to the print head?
@BestPrinters
Жыл бұрын
By running a printhead cleaning, that will push the ink back into the system.
@christinecobb2831
Жыл бұрын
Does the ink flush pool up somewhere that needs to be emptied? Did you fill the tanks on top of whatever old ink was already in them, or drain those out somehow first?
@BestPrinters
Жыл бұрын
Yes you just need to refill the yanks with new ink, no need to take out the old.
@crystalkniffen4846
Жыл бұрын
I use my G6020 for edible printing with edible ink & paper. Is this cleaning solution safe to eat?
@BestPrinters
Жыл бұрын
No, dont eat it.
@Mix-gx5ps
2 жыл бұрын
Hello, this is a great video and I'm anxious to try it, however I can't seem to find a kit that specifically calls out the G6020. I'm worried that the hoses aren't going to fit as a result. Are you aware of any kits that are available at this time that will work with the G6020?
@BestPrinters
2 жыл бұрын
Yes the kit in this video is compatible with the G6020. I have used it myself.
@dseyna
2 жыл бұрын
Thanks very much@@BestPrinters for your quick response, I appreciate it. Based on your advice, I'll give it a go.
@tieshahenson2460
Жыл бұрын
Thank you so much, this was a very helpful video!!!!
@phylwags
Жыл бұрын
I followed these directions but must have done something wrong since the colors are still very light and the quality of my photos I've printed are awful. An advice? Should I have used a full bottle of cleaning solution on every color?
@claudepiche2384
Жыл бұрын
I have a Canon G6020 but the tube for Color are block. I don’t see any ink in the tube and the reservoir are full. Thanks
@BestPrinters
Жыл бұрын
You can run a power cleaning/ Printhead cleaning to get the ink back into the system.
@tracyvass742
9 ай бұрын
Can your cleaning solution be used with edible image priters?
@BestPrinters
9 ай бұрын
Yes, absolutely
@PaulHoyle777
Жыл бұрын
Is it easier to buy some new print heads?
@BestPrinters
Жыл бұрын
In some cases yes.
@annanderson4262
5 ай бұрын
I've got a g7020 and there's no. Ink flush in the maintenance section on the printer tools what next?💙
@BestPrinters
5 ай бұрын
It may be titled something else on your printer you will need to look it up.
@AppleUser
2 жыл бұрын
Great video, but..... how do I clean the waste ink pad???????
@BestPrinters
2 жыл бұрын
It needs to be replaced actually.
@AppleUser
2 жыл бұрын
@@BestPrinters how? Where can I buy new pads?
@Roadsurfer2k11
2 жыл бұрын
Yeah answer this guy's question... Pretty sure if I buy this printer from bestbuy I'll pay the extra $60 for 4 years of warranty and let them deal with it. Any code that pops up I either get the money back or replacement as I've done 3x before
@onearmer
5 ай бұрын
Could you please clean a cloged printhead instead showing Theorie. That would be great...
Hi I have a bigger problem my daughter filled up the blue tank with black ink. Of course printer it's not using it. How I can remove and clean the blue thank filled with black ink?
@BestPrinters
Жыл бұрын
You will need to use the metal tubing that comes with the kit to remove the incorrect ink.
@Kenlydford
6 ай бұрын
I honestly rarely use color but after a year and a half of printing black only, the colors look to be full until the nozzle check it’s looks almost as bad as the black. Is this just because I don’t use it that often and can I just add black to fix my faded black problem?
@BestPrinters
6 ай бұрын
It is most likely because you don't use color. The cleaning kit should help.
@Kenlydford
6 ай бұрын
@@BestPrinters yep, that was my guess. Thanks.
@kevinlavin6633
Жыл бұрын
Thank, great video! ***QUESTION*** I am looking to purchase this printer (classifieds - never used, but half the price vs retailer and tanks were filled by owner). I am going to be using this for sublimation with sublimation ink, but I need the existing ink GONE from those tanks. Will the Ink Flush get rid of all of the ink? Or is there a lot of residual still in there? If there is, is there a way to flush the rest out or even remove those tanks so I can syringe-wash by hand? I can't have any remaining 'regular' ink in there. And if you don't know, that's perfectly fine, I just can't seem to find a straight answer online!
@BestPrinters
Жыл бұрын
Hi Kevin, there is no easy way to perform this ink clearing. The ink flush will still leave quite a bit of regular ink in the system.
@kevinlavin6633
Жыл бұрын
@@BestPrinters I kind of figured that. Hey, thanks so much for replying, I really appreciate it! Keep up the great work!
@nicolinavincelli9369
5 ай бұрын
Hello, I did try "how to clean the printheads" and did not work, I did all the test I was told to do, nozzle, deep cleaning etc, It filled my maintenance cartridge twice and now I have to wait to get another maintenance cartridge. I received a phone call from Canon today and now they are sending me another printer, oh wow. I print a lot and I am not sure this is the printer for me, not even a year old and I have already printed 7350 pages. I not sure what brand is best, so confusing. Apparently the printheads are gone, to replace them is very expensive and very hard to find, I own a Canon G 2270.
@denisehenson6116
Жыл бұрын
My ink tanks are completely full now. My printing is super faded. Can I still clean the cartridge??
@BestPrinters
Жыл бұрын
Yes
@MagdaLena-ph4pp
Жыл бұрын
Hi , I did everything from your video to clean the printer, but on the and I’m not sure of the steps ? So I did clean manually with cleaner kit ✅ and then with I understood from your video on the and I did ink flash and nozzle check✅ but you are talking something and deep cleaning and cleaning, I’m not sure if I should add this to the process. Please make sure on the and of video you are slowly describe the steps with showing what to click on the screen the printer, it was confusing. And after the process you show on the video my check print page looks the same 🤔 and idea what I did wrong ?
@MySaturdayCreations4575
2 жыл бұрын
I recently purchased my Canon pixma 7020 (a month ago) and its print is kinda faded and dull. I’s very frustrating! Would this cleaning product help me?
@BestPrinters
2 жыл бұрын
Yes, definitely
@GrabberBlue5.2
2 жыл бұрын
does the G6020 have a replaceable maintenance cartridge?
@BestPrinters
2 жыл бұрын
It doesnt.
@sophieliu7749
2 жыл бұрын
What about gx6020. Is there a similar video
@BestPrinters
2 жыл бұрын
It would be the same process.
@joeshmoe5935
2 жыл бұрын
Thanks. I hope this is what it takes to take care of error 5200. I was trying to print a 100 page pdf and black ink starts to die. When run nozzle check black no longer prints. Hope this is it.
@BestPrinters
2 жыл бұрын
This should bring back your black color.
@joeshmoe5935
2 жыл бұрын
@@BestPrinters didn't work. flushed it with solution until it all came out clear. jus the black then ran ink flush to fill up the tubes. ran nozzle check and no black. Now when I unhook the cartridges the black tube seems to remain full. Only the color ones seem to empty and fill with air. Does that tell you something?
@joeshmoe5935
2 жыл бұрын
@@BestPrinters solvent didn't do it. dipped print head in very hot distilled water, flushed it with more of teh same. water came out clean and clear. ran ink flush and still nozzle check no black print. Tubes in the printer are full. and ten minutes later 5B00
@RichardSwope-k1t
2 ай бұрын
How do I get the ink to flow from the bottle to fill the tank?
@choscheit
Жыл бұрын
I have followed your directions, it prints in double letters. It's hard to read the pages. I've followed everything, except to use the cleaning kit. I did buy it and ready. But, I'm 70 yrs old, and afraid to try more. I have used the cleaning settings & the full flush. Still hard to read printing, its double printing on each letter being printed. usC000 code. What now?
@XellosMetallium
10 ай бұрын
Can you show us the waste ink tube? I just need to route it to a reservoir
@BestPrinters
10 ай бұрын
There isnt tubing , the system works with a pad. The pad collects the wasted ink.
@XellosMetallium
10 ай бұрын
i figure it out, for the g6020 model the tubes are on the right side of the printer. instead of taking the whole thing apart i drill and cut to expose the tubes and reroute them into a larger printer ink resevoir. Now everytime I flush the ink it goes into the tank instead of dumping it onto the pad sitting below the printer.@@BestPrinters
@GaryWold
3 жыл бұрын
Hey Brandon, what are your thoughts on Epson vs. Canon with regard to the Waste ink sponge servicing and reset. I'm drawn to the Canon G7020 but I its my understanding that you cant service this yourself on the Canon.
@Roadsurfer2k11
2 жыл бұрын
What printer did you get? I was eyeing ecotank 3850 before seeing the g6020. Did you replace pads? I'm getting a 4 year store warranty and not dealing with this. I've had no problems even at bestbuy getting an newer improved headset at no extra cost because former headset was discontinued
@randakhoury8366
11 ай бұрын
Great video Thank you My printer Canon G3062 error code 5100 Please help Thank you Randa
@BestPrinters
11 ай бұрын
Hi Randa, with error code 5100 please ensure that there isnt anything jammed within the printer.
@ttwotees
9 ай бұрын
My Canon G7020 mega tank printer only prints yellow when it should be printing other colors,
@BestPrinters
9 ай бұрын
Yes it needs this cleaning.
@JaneDSeyz
Жыл бұрын
💯Best thanks so much - video helpful, thorough and well done!!!
@BestPrinters
Жыл бұрын
You're very welcome!
@follow_your_dream_goals
2 жыл бұрын
I just bought this printer a few days ago and it prints lines across horizontally only at the beginning can you help please
@BestPrinters
2 жыл бұрын
Yes you will want to do a printhead cleaning witht he bp cleaning kit.
@starrsong3432
4 жыл бұрын
thank you! really helps
@donethen7984
3 жыл бұрын
Brandon, I did the whole flush, even did the Ink Flush in Maintenance. The BLACK seems to be problematic. I feel that the black tank needs black ink. However, an odd problem: The ink from the bottle will NOT FLOW into the black tank. I did a dipstick analysis and the tank is almost empty but hard to see when ink has been in there for a while. Can you shed some light on why an ink bottle will not flow its ink into the black tank? thank you.
@roymariano7116
4 жыл бұрын
what is the cleaning solution made of ? is it water based or hydrocarbon or other solvent based ? Could you please provide a link to the cleaning solution's MSDS. Thanks
@BestPrinters
4 жыл бұрын
Please contact Best Printers through Amazon for MSDS.
@Roadsurfer2k11
2 жыл бұрын
3 drops dish soap, 4 teaspoons ipa from drug store mixed in some deionized water ($1 a gallon). We already get ripped off by the printer manufacturers ($165 for an epson ecotank maxify print head??) Cost them $10 in China or Vietnam to manufacture
@charlottebeseke5596
2 ай бұрын
Your Amazon link doesn't take me to your kit.
@carsonmcnamer5321
4 жыл бұрын
Thanks! Really helps
@ebravo31497
3 жыл бұрын
What if one color doesn’t appear at all on your nozzle check?
@BestPrinters
2 жыл бұрын
Repeat the process.
@choscheit
Жыл бұрын
I can't get the ink bottle to flow into the tank. I've cleaned the bottle top and the top of the tank, but the ink will not go into the tank. Directions say to have printer on, and I've done that. Now what? I've ordered you suggested cleaner, and will be attempting to clean heads, But if I can't fill the tanks, what do I do?
@Whodatt999
Жыл бұрын
Where does all that ink go? All the ink used in a flush? Do I need to find it and dump it out?
@BobCindyL
3 жыл бұрын
Thank you very much.
@BestPrinters
3 жыл бұрын
You're welcome!
@anggiasibuea6051
2 жыл бұрын
Thank you.
@BestPrinters
2 жыл бұрын
You're welcome!
@d_dubya44
3 жыл бұрын
I have been scouring the internet for an at home solution to my canon pixma g1200. Error says something about tank overfill??? This happened after doing a session of cleaning and clearing. Now I can’t attempt anything through my computer to resolve. Is it possible to manually fix this issue at home?
@jeffschlumpf1753
3 жыл бұрын
I have a Canon G1200 and the waste ink pads are full. Canon says it's not serviceable. Are there any ink tank printers that have replaceable waste pads?
@radellaf
3 жыл бұрын
I hear that a user replaceable waste pad cartridge is a new feature on the G3260 and similar generation (dec 2020) megatank printers.
@d_dubya44
3 жыл бұрын
Jeff- i am having issues with mine too, error says something about tank overfill 🤷🏼♀️
@toyotavizio4023
2 жыл бұрын
Good Job. Thanks.
@BestPrinters
2 жыл бұрын
Thanks for watching! Consider leaving a 5 star review on Amazon and subscribing to my channel.
@grikor1
2 жыл бұрын
Will this reset the waste ink count?
@jackcotlar1594
4 жыл бұрын
Nice presentation. On Pixma G3200 how do I get the carriage to be stationed in the middle for access?
@dougmann777
4 жыл бұрын
Hold down the Stop key for an 8 count, twice.
@jackcotlar1594
4 жыл бұрын
@@dougmann777 Thank you (belatedly)
@bmwM5ma
Жыл бұрын
Do heads dry out if not used
@BestPrinters
Жыл бұрын
Yes, they do. Which is why you want to print at least bi weekly.
@bmwM5ma
Жыл бұрын
@@BestPrinters thank you what printer would u recommend for home use, dont print much?
@googleuser7202
3 жыл бұрын
*So when you do a ink FLUSH where does that ink go*?
@yukiwing
3 жыл бұрын
Good question, I also want to know.
@no_peace
2 жыл бұрын
There's an ink absorber inside I'm pretty sure when the ink absorber is full the printer has to be replaced
@denahom
2 жыл бұрын
@@no_peace 😒
@vilmachavez7807
3 жыл бұрын
Hi, can you help me out a cannon G6010. An error reads" something like" close the ink valve and reinstall the print head". The paper also stops feeding all the way ver frequently. Thx!
@bubbita23
Жыл бұрын
Can this cleaning product be used on an edible printer?
Пікірлер: 242