This is the first video I’ve found that actually creates art with the nespresso machine! Excited to try it again thank you!
@EstebanHernandez-hs6zl
3 жыл бұрын
Thank you!!!
@DonovanLee
3 жыл бұрын
Facts
@kristymichael3397
9 ай бұрын
OMG SO HELPFUL!!! I didn’t know that you can take out the spiral attachment in the center to help make a thinner foam. Always felt annoyed at how thick the foam was whenever I made drinks with it
@nares2005
7 ай бұрын
Did he take the spring out? I didnt see it in the video.
@Xenon_Proto
7 ай бұрын
I do this every Saturday morning, can’t have a bad day with a coffee like this!
@klemgems2527
2 жыл бұрын
Did you froth the milk twice or am I not understanding from 1.37 -2.06 thanks
@ray-xdddddkeeptrying3858
Жыл бұрын
Omg… for the first time in past five years, i finally know what the of the other head on the lid does. Thank you so much!
@honoredsage4946
Жыл бұрын
What?
@chadbailey7038
8 ай бұрын
Gonna try this tomorrow morning. Wish me luck 🤞🏾!
@Taquhi
3 жыл бұрын
This is the third video I’ve watched tonight using the Nespresso Aeroccino Milk frother and it is absolutely the best. 1st was good, 2nd was better and more practical (but didn’t show the Aerocino pre milk), and this one is everything #2 was missing. If I had the milk pitcher, I’d try to make latte art right now, but I’ve had 2 failed attempts that are now resting in a mason jar in the fridge. Hopefully my target run in the morning & this video will help me have a decent result tomorrow 🤣
@EstebanHernandez-hs6zl
3 жыл бұрын
Thank you
@tpc9002
2 жыл бұрын
What pods I need to do latte or flat white I’m confused with them and which is this machine called worth the frother
@DarkLightAsDay
2 жыл бұрын
Same here! There's no avoiding the pitcher I guess
@viviandiaz1439
Жыл бұрын
Hello great video! I'm just confused on if you heated the milk twice in the frother or once?
@EstebanHernandez-hs6zl
Жыл бұрын
just 1 time!, the thing is that a lot of foam was stuck in the frother so i try to mix everything again
@damage0311
Жыл бұрын
I tried this, but there's just so much foam and it all stays behind in the pitcher. Seems like my aeroccino 3 is not good for making latte art.
@alexross9630
Жыл бұрын
Did you remove the spiral/spring? The spring froths it into a thick foam, but the froth is much gentler without it.
@honoredsage4946
Жыл бұрын
@@alexross9630 i noticed it doesn’t work with out it in
@jamesrenaud9218
Жыл бұрын
Did u removed the spiral?
@darkcowofthenorth
9 ай бұрын
@@honoredsage4946the spring only. Not the entire spinner.
@hudamohammadzuhair
8 ай бұрын
You can stop it before it becomes too thick
@scottwells6877
4 жыл бұрын
I’ve just bought a milk jug and have practiced twice today. So far not so good 🤣
@EstebanHernandez-hs6zl
4 жыл бұрын
scott wells if you really like latte and flat whites, invest in a breville bambino, I just bought one and my latte art is incredible, also the taste is way better (natural) than nespresso
@scottwells6877
4 жыл бұрын
Esteban Hernández I would love to buy another machine (one with the grinder attached to the machine), especially now that I’m working from home due to Covid and have the time to put into it. But life will soon get back to normal and I’m afraid the Bambino will be neglected 😞
@Nutshell287
4 жыл бұрын
Hey you are mixing mixed milk in aeroccino for the 2nd time ? Of youre pooring it back to aeroccino to collect the rest of the foam and pooring it once again to metal mug ?
@EstebanHernandez-hs6zl
4 жыл бұрын
Second sentence is right, I’m making sure it’s well combined
@Nutshell287
4 жыл бұрын
@@EstebanHernandez-hs6zl thanks for the answer!
@MitchRichard65
3 жыл бұрын
@@EstebanHernandez-hs6zl I was browsing the comments section for an answer because that part was VERY unclear.
@p3030134
3 жыл бұрын
Same here, which is funny when there is a statement "This is the most important part of the video"... lol . Thanks for the tips.
@chrischammas1
2 жыл бұрын
Thanks for asking this. That was the only question I had.
@viviane4400
3 ай бұрын
Hi ! Can you make a video to explain the entire process to get the perfect milk texture with the Nespresso machine ? Thanks 🙏
@今日安否
2 жыл бұрын
Not sure why are there so many hater comments but thanks so much for the video! Really wanted to make latte art but my house only has Nespresso machine and it’s not east making latte art with Nespresso. Tried many times but still fail will the milk, will continue trying😭 ur video will be my inspiration
@joseceja8908
2 жыл бұрын
Thanks for this video bro...Gonna try this tonight
@ghina1920
3 жыл бұрын
am i supposed to wait until the milk frother machine stops? because one time i waited until it stopped, and it was so foamy and i couldn’t do latte art
@akx_xn3661
3 жыл бұрын
I usually wait around 50 second or so since it makes too much foam or just use a spoon to block the foam just put the milk then use the spoon to scoop out foam to ur liking
@ghina1920
3 жыл бұрын
@@akx_xn3661 oh okay thank u so much!
@faisalalmousa1890
Жыл бұрын
finally someone know what we looking for, haha Thanks for the video.
@svenjamd1119
10 ай бұрын
Huh? Did you remove the spiral from your attachment?? 😮 Is this supposed to be detachable? Please show how 😮
@castcrus
Жыл бұрын
So I have to have the right amount of milk so when I pour, the liquid go under the creama first, then at the end the foam forms the art on top. Didn't know that, thank you!
@andresasnicar3562
2 жыл бұрын
Hola, buen video, me quedó una duda nomas: luego de usar el Aeroccino depositas la leche con espuma en el pitcher para mezclarlo, hasta ahí bien, pero luego veo que del pitcher volves a pasar la leche al Aeroccino. ¿Para qué sería eso? Volves a repetir el proceso? Porque después vuelve a aparecer la leche en el pitcher...
@MarianaRodrigueszion
Жыл бұрын
I have the same question
@MarianaRodrigueszion
Жыл бұрын
He actually Answered bellow on the coments.. He puts the milk back in the aeroccino to mix with the remaining milk
@sadaharu5870
Ай бұрын
Can I do this with a Nespresso Barista Recipe Maker?
@luchodovidio7202
2 жыл бұрын
What button should I press in aeroccino 4?
@ruizmota3115
Жыл бұрын
I haven't understand why so you transfer it back in the frother. You froth it twice?
@nickdadon
3 жыл бұрын
Im confused by the milk part, You poured it back into the aeroccino and then what? did you reheat it? or just put it back into jug for a second time, this part of the video isn’t clear?
@rrroumn
3 жыл бұрын
Lol yea that's confusing as hell, don't understand either
@tinalee7473
3 жыл бұрын
I think he poured it back into the frother and then straight back into the Jug just to get all the foam out of the frother
@eimilpatel
4 жыл бұрын
I’m not using that spring whisk yet my milk comes out super foamy still. I just don’t know what I’m doing wrong or how to get the milk creamy enough for latte art...
@ghina1920
3 жыл бұрын
samee
@dircegomez1521
3 жыл бұрын
For how long do you guys leave de aeroccino frothing the milk?
@veritas932
2 жыл бұрын
you will never get creamy foam from automatic frothing machines, it's just not possible
@EstebanHernandez-hs6zl
Жыл бұрын
i think you are putting to much milk in the frother
@duygukurt4472
3 жыл бұрын
Mixing the milk with foam in pot makes the milk a bit colder, right? I have aerrocino 4 it already does not heat it to the temperature that I want. What do you think and suggest?
@EstebanHernandez-hs6zl
3 жыл бұрын
Heat up the pot with warm water
@JonLake
Жыл бұрын
Or put water in the aerrocino heat it. Remove the water pour milk and froth.
@dalebradley6039
2 жыл бұрын
I would imagine your coffees cold after this process. Iam not sure areochinos are hot enough (I do realize coffees not to be too hot) But i Like mine Hot... Any Ideas..?
@茌铭匡
2 жыл бұрын
Hi,Mr. i make milk foam in your way,but the status of milk is not very good,the most of the milk cant attached to the surface,only the final milk can keep on the surface。can you help me?thank you very much!
@EstebanHernandez-hs6zl
2 жыл бұрын
Use a spoon to put some foam in the milk
@EmWatsonable
4 жыл бұрын
Taking off the spring is a pretty neat trick. i found that the milk is gonna be way too foamy with spring
@EstebanHernandez-hs6zl
4 жыл бұрын
Yes, makes the foam way more easy to handle basic latte art
@Mandocammarano505
4 жыл бұрын
Esteban Hernández I have one of the older nespresso mil frothers and I can never get the milk good enough for art, do you think it’s the difference in machines or am I missing something
@dman4435
3 жыл бұрын
So he/she froths the milk taps it and then pours it back into the frother? Then what? Runs again? It cuts to the milk being back into the metal cup......???
@tinalee7473
3 жыл бұрын
I think he poured it back into the frother and then straight back into the Jug just to get all the foam out of the frother
@dman4435
3 жыл бұрын
@@tinalee7473 Thanks. I kind of assumed.....but wasn't sure.
@gigig2492
8 ай бұрын
Does this work with 1/2 & 1/2 or only milk?
@ricardorayg.9820
3 жыл бұрын
Dope
@JolenesJournal
4 жыл бұрын
Omg!! Did you really leave the lid off of the aeroccino?! I took the spring off but it was still pretty foamy.
@EstebanHernandez-hs6zl
4 жыл бұрын
Haha, i know how much milk I have to pour for 1 cup and no spilling. Try taking spoons of foam to make the milk less frothier
@JolenesJournal
4 жыл бұрын
@@EstebanHernandez-hs6zl that's so smart!! I'm over here like FFFFF i don't want the aeroccino 4. I usually make it to the top max line but that's still not enough milk for my cup. It's enough milk for my tummy though lolol
@robb682
4 жыл бұрын
I just order aeroccino 4, i hope that machine can make creamy milk for my cappuccino. Good video thx 👌
@EstebanHernandez-hs6zl
4 жыл бұрын
@@robb682 good luck! buy a pitcher, and stir the expresso alot, fake crema like nespresso is hard to handle, buy a moka pot
@stanceworks7995
4 жыл бұрын
I just bought the essenza mini bundle and it came with this same frother.... But the frother isn't making the milk hot so my coffee doesn't stay warm for long. What am I doing wrong? I do switch the frother off and not wait for it to switch off on its own because it makes it too thick. Is that what I'm doing wrong?
@saralam2008
3 жыл бұрын
Plz which kind ok milk 🥛 you are using ?
@EstebanHernandez-hs6zl
Жыл бұрын
whole
@mladen83db
2 жыл бұрын
This late milk isnt dense at all, can this machine. Make real late dense milk insted of this
@mikeshi2956
3 жыл бұрын
What type of milk do you use?
@EstebanHernandez-hs6zl
3 жыл бұрын
Whole milk
@manosm1
4 жыл бұрын
Ouaou! Perfect preparation. I will try! Thank you!!!
@sukaduit485
3 жыл бұрын
nice
@vanessa8853
3 жыл бұрын
what kind of milk works well for latte art?
@EstebanHernandez-hs6zl
3 жыл бұрын
Whole milk!! All the way
@vanessa8853
3 жыл бұрын
@@EstebanHernandez-hs6zl have you tried almond or silk milk before? if so, was it successful lol
@EstebanHernandez-hs6zl
3 жыл бұрын
@@vanessa8853 yes! Just make sure you buy the “barista” type
@ghina1920
3 жыл бұрын
i have a question why do i need to take off the spirals?
@EstebanHernandez-hs6zl
3 жыл бұрын
Because if you don’t. You will make a lot of foam you don’t need and it’s counterproductive
@betomy69
Жыл бұрын
Love the sandals look!
@EstebanHernandez-hs6zl
Жыл бұрын
lol thanks
@iliana_b
3 жыл бұрын
I just got a Nespresso Pixie by Krups and Aeroccino 3! Can you recommend a nespresso capsule for cappuccino? Also, is it ok to mix the foam and the milk with a spoon? thanks!
@EstebanHernandez-hs6zl
3 жыл бұрын
Try the colombia capsule it is very good
@EstebanHernandez-hs6zl
3 жыл бұрын
Try to mix the foam and the milk with the pitcher
@iliana_b
3 жыл бұрын
@@EstebanHernandez-hs6zl thanks!
@DF-yz4kj
3 жыл бұрын
it would be nice to have an explanation as to why you did what you did
@EstebanHernandez-hs6zl
3 жыл бұрын
What questions do you have? I can help you with that
@MrDriao
2 жыл бұрын
La tecnica es hacer círculos con la leche?
@Gilkshe
Жыл бұрын
You can tell the milk doesn’t come out as white as it should, it’s possible to make latte art with this but it’s more difficult and the result is not the same..
@theshortsofAlexus
3 жыл бұрын
I have Nespresso virtual next can I do this my machine too????
@buss7771
Жыл бұрын
Tried this a couple times and does not work....
@robpullen
3 жыл бұрын
I’m struggling with the coffee already in the cup having a frothy top before even pouring the milk in ?? How can I practice the art of the coffee is already frothy ??
@robpullen
3 жыл бұрын
@@googlexd7294 no matter what I try, I can’t do it. I bought a small jug for pouring in the milk but I just can’t do it. I’m not sure if it’s me or because it’s a cheaper nespressso machine rather than an expensive commercial coffee machine. I’ll keep practising I guess.
@gerhernz1698
Жыл бұрын
What Nespresso machine is that?
@catalinaholzer
3 жыл бұрын
What size cup do you use? What’s your milk to coffee ratio?
@EstebanHernandez-hs6zl
3 жыл бұрын
180 ml the ratio is 150 milk and 40 ml expresso
@NxSBob.
Жыл бұрын
How do you set the ml of espresso on the machine? Or do you just press the button twice
@grootlug
Жыл бұрын
Hold the button down (with a cup underneath), once you have your desired amount of coffee just release the button. The machine will remember the setting for the next times
@yadirarojas8621
2 жыл бұрын
cual es el cartucho para esta maquina, puede explicar la funcion de los tres botones de arriba
@earlbai697
Жыл бұрын
May I ask how long should you keep the frother running?
@fisher4022
Жыл бұрын
Use a bodum French press for frothing milk it’s only 15 bucks and works better than any other non Steam wand method. Watch some videos on it and you’ll see they get much better results
@maurodelgadoo
4 жыл бұрын
Hola! Solamente le quitaste el espiral o donde conseguiste ese espiral? Tengo el aeroccino 4 crees que funcione?
@EstebanHernandez-hs6zl
4 жыл бұрын
Si quítale el espiral si no hace mucha espuma, tienes que revolver la espuma con la leche de abajo hasta que quede como brillosa, ademas el expresso de nespresso no ayuda mucho porque la crema que hace es súper fake, si quieres ponerle más contraste ponle canela o chocomilk espolvoreado.
@maurodelgadoo
4 жыл бұрын
@@EstebanHernandez-hs6zl gracias! Tengo el aeroccino 4 pero hago espresso con una maquina de espresso de nombre nanospresso no me gusta la crema de la nespresso voy a intentarlo. Muchas gracias
@EstebanHernandez-hs6zl
4 жыл бұрын
maurodelgadoo si! Lo más importante es dejar la leche como pintura y sobre todo practicar
@rodf16mx
2 жыл бұрын
@@EstebanHernandez-hs6zl a que te refieres con decir que la crema que hace el nespresso es super fake?.
@ZeusBielski
3 жыл бұрын
Does the frothier heat up the milk?
@EstebanHernandez-hs6zl
3 жыл бұрын
Yes
@tkarwai
2 жыл бұрын
May I know what is the size of milk pitcher u using?
@Sekhmet91
6 ай бұрын
I would've also like to know this 😅
@mehdi6797
3 жыл бұрын
Should I take lango or esspresso??
@EstebanHernandez-hs6zl
3 жыл бұрын
Try both!! But u usted to take expresso
@mehdi6797
3 жыл бұрын
Did you remove the whisk??
@paolaguajardo3060
6 ай бұрын
Y así es como te tomas un café totalmente frío 😂
@AztielSanchez
3 жыл бұрын
How can I take off the spring attachment?
@EstebanHernandez-hs6zl
3 жыл бұрын
Remove the metal ring from the plastic that holds it
@ZeidGho
Жыл бұрын
I thought I could do it straight from the frother 😥
@sarizonana
2 жыл бұрын
Hola oye puedo comprar la pieza de late online( que no tiene el reguilete,). esque vez que con el aeroccino te vienen 2 aritos o piezas para tu aeroccino, una para cappuccino y otra para late bueno perdí la del late porque no la uso, siempre uso la de capuchino y me encanta jajajja la uso de forma simple sin el arte latte. Pero puedo Comprar online la pieza que perdí?
@EstebanHernandez-hs6zl
2 жыл бұрын
Búscala en Mercado libre seguro la encuentras, la otra opciones quitarle la espuma más densa; prueba y error
@sarizonana
2 жыл бұрын
@@EstebanHernandez-hs6zl mil gracias yo creo que mejor busco la otra pieza en mercado libre, la verdad nunca me interesó usar la otra pieza hasta hoy. Yo estaba muy feliz con mis capuchinos como me los hacía hasta que vi tú video jajaja. Pero buscare la pieza en mercado libre también perdí mi tapa del aeroccino. porque siempre me hago mis capuchinos sin tapa.
@EstebanHernandez-hs6zl
2 жыл бұрын
@@sarizonana te recomiendo brincar a Breville! Cuando puedas
@sarizonana
2 жыл бұрын
@@EstebanHernandez-hs6zl sugieres que me cambie una de las cafeteras de breville o que busqué el aeroccino de breville? Las cafeteras hijole me dan miedo no saberlas usar y son más caras. La automática dicen que no saca tan buen café como el nespresso y la que es con café molido pues se ve más complicada
@EstebanHernandez-hs6zl
2 жыл бұрын
@@sarizonana sugiero que te cambies! A la larga (2 años) vas a gastar más en cápsulas que invirtiendo en una buena cafetera
@georginamusalem7993
3 жыл бұрын
Wow pararece tan sencillo..pero por más que intento no me sale 🤦🏻😁🤷
@EstebanHernandez-hs6zl
3 жыл бұрын
Sigue intentando!
@aznvincekong
3 жыл бұрын
What flavor u use
@EstebanHernandez-hs6zl
3 жыл бұрын
Colombia capsule
@ExploreCoffeeRoasters
4 жыл бұрын
does this work for the cold mode for the milk?
@EstebanHernandez-hs6zl
4 жыл бұрын
Paul Xing is not the same though
@ExploreCoffeeRoasters
4 жыл бұрын
@@EstebanHernandez-hs6zl oh ok, I tried using your method but unable to get the right texture for the milk...
@EstebanHernandez-hs6zl
4 жыл бұрын
Paul Xing stir and stir until its glossy
@ExploreCoffeeRoasters
4 жыл бұрын
@@EstebanHernandez-hs6zl ok got it, will try that. Thanks man!
@simbawood
2 жыл бұрын
It will be cold by the time when it is ready.
@hkgtravellover
3 жыл бұрын
Hi I tried your way but didn’t work out well. Couldn’t make the milk surface glossy after swirling the frothed milk in pitcher. Any idea why?
@EstebanHernandez-hs6zl
3 жыл бұрын
Tap the pitcher more times
@RodrigoRodrigues_info
3 жыл бұрын
I've been trying to follow these instructions but can't get the texture right, any tips?
@EstebanHernandez-hs6zl
Жыл бұрын
milk must be suuuper glosy and "perfect" with the frother is SUUPER hard, try and error try and error dude
@MasterPiece-rg7ed
4 жыл бұрын
On other videoes they use the spring?
@EstebanHernandez-hs6zl
4 жыл бұрын
Yes, but i dont like it, it is to foamy for latte art
@MasterPiece-rg7ed
4 жыл бұрын
@@EstebanHernandez-hs6zl but when i use the latte whisk like you, then my milk becomes too watery? And im using whole milk 3.5%
@EstebanHernandez-hs6zl
4 жыл бұрын
MasterPiece 1419 use cold Milk, if it doesnt work then use the spring but when you stir in the pitcher take out like 2 spoons of foam
@hyggekitchen2007
4 жыл бұрын
I have a recipe 'how to make Einspanner(ViennaCoffee) at home using Nespresso Lattissima one
@danielazevedo2940
10 ай бұрын
latte art? no have one
@jj2223
3 жыл бұрын
Wtf is that 🤷🏻♂️
@fredd4y
2 жыл бұрын
bleah
@rafaelfavaro1260
3 жыл бұрын
Kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
@BuddyQuaid
2 жыл бұрын
Guarantee this was a pretty mild to luke-warm cappuccino. Too much milk in the frother (above the lines), no lid so heat escapes, coffee sitting there waiting for milk while he taps the cup all day. I've never seen a barista tap it that long in my life. Then swirls the coffee! Allows room temp air to cool the espresso down even more.
@EstebanHernandez-hs6zl
2 жыл бұрын
Lol, try doing latte art with nespresso, you have to improvise a lot to make it work
@BuddyQuaid
2 жыл бұрын
@@EstebanHernandez-hs6zl Yes. True. I have tried. It never turns out well.
@veritas932
2 жыл бұрын
that's really crappy lattte art. shows that the foam is not the right consistency
@EstebanHernandez-hs6zl
2 жыл бұрын
🤣🤣🤣🤣lol
@AbdullrazaqHussain
2 ай бұрын
Wow so bad
@carlosrobles813
4 жыл бұрын
is this a joke? lol
@EstebanHernandez-hs6zl
4 жыл бұрын
Yes, for your mom
@austinhayes3837
2 жыл бұрын
Your video makes no sense. You made the milk and just left it sitting there while coffee was made? (how long was it just sitting for?) you poured it out, then poured it back into frother just to pour it immediately back into container to serve lol and it was way too much milk. your video sucks.
Пікірлер: 169