check out this video for painting model faces kzitem.info/news/bejne/wHptua2ieniJhag
@ippaku
4 ай бұрын
Watching the back catalogue to learn and support the channel. Be well be you
@MinifigureManiacs
2 жыл бұрын
You have some great skills, don't give up on the channel, it will blow up eventually with the quality of your work.
@Groundeffected
2 жыл бұрын
That's the plan! thank you
@blahtoausername
2 жыл бұрын
I want the smaller version. I don't have instasham to ask about a commission though. Love your work!
@Groundeffected
2 жыл бұрын
I’ll figure it out asap
@kalzyoung
2 жыл бұрын
That intro 🤣🤣🤣🤣🤣🔥🔥🔥🔥🔥🔥🔥🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼 you sound like Ewan McGregor
@JesusIsKing373
2 жыл бұрын
Mah se harreh, brilliant!
@tomasguadarrama3266
Жыл бұрын
I’m always so impressed of how good this works of art come out.
@mickkennedy1853
2 жыл бұрын
Damn, you made that look so easy mate. Superb job
@Groundeffected
2 жыл бұрын
Thank you. It’s not too difficult when you know how. Thanks for watching!!
@timwelch175
2 жыл бұрын
Your talent got me watching. Your personality, humor, and delivery are what got the sub and notifications clicks. I'll be using your links when I can. Keep up the great work!
@nolanmerchan5095
Жыл бұрын
Awesome job, man. They look amazing. I wonder how this would look with Rogue in her green-and-white costume and Carol wearing her Warbird costume.
@Groundeffected
Жыл бұрын
That would be cool!
@anthonydefrancesco9078
2 жыл бұрын
You make this look so easy! Awesome video as always.
@Groundeffected
2 жыл бұрын
Thank you very much.
@vegitagt
Жыл бұрын
Awesome statue and paint job.
@danielbalmaceda2270
2 жыл бұрын
Excelente acabado..
@scottssillymodelworx370
2 жыл бұрын
Well that was a cool one. I might start looking into dirting up some models... looking forward to the next one 😀 👍🏻
@Groundeffected
2 жыл бұрын
You should! thanks for watching
@adambeedle
2 жыл бұрын
Awesome print and paint!
@Groundeffected
2 жыл бұрын
Thank you.
@azhorel
2 жыл бұрын
Outstanding paint job!
@Groundeffected
2 жыл бұрын
Thanks my dude. Look out for the eyes video hopefully this week. Thanks for watching again man
@azhorel
2 жыл бұрын
@@Groundeffected I’m looking forward to it! BTW, did you print it all? I always struggle with big figures and supports. I’ll be trying an NFEP and your Lychee settings to see if that helps! Thanks!
@Groundeffected
2 жыл бұрын
@@azhorel yea all printed here. Used mostly medium supports of my settings. Not the lights and hardly use heavys maybe on like well hidden areas only.
@jimallen4382
2 жыл бұрын
Awesome work
@Groundeffected
2 жыл бұрын
Thanks very much man!!
@darkorakix22
2 жыл бұрын
Man,started to follow you and this piece is great, super painting
@Groundeffected
2 жыл бұрын
Thanks for your time dude.
@evolutionxstudios
2 жыл бұрын
great job!
@Groundeffected
2 жыл бұрын
Thank you 🙏 thanks for watching.
@JohnSmith-rt5yq
Жыл бұрын
I gotta ask, how much does one of these run? It's a ton of work and looks amazing.
@Groundeffected
Жыл бұрын
It’s so dependent on artist and size and detail. None are the exact same price they’re all different and some can take weeks of work.
@juniorjoseph8232
2 жыл бұрын
Amazing work! Out of curiosity which liquid latex are you using? (Your website store link doesn’t seem to work)
@Groundeffected
2 жыл бұрын
Damn. It must be a broken link that means all them are broken. Urgh!! Um I’m using Vallejo liquid mask if you want to support the channel you can just search for it after clicking any of the Amazon links that do work. This obviously costs you no extra but does give a small fee to the channel 😊
@TheFrayedBrush
Жыл бұрын
Great looking status. What was the gold you used on Captain Marvel? It looks amazing.
@josealmazan1592
2 жыл бұрын
Hello, another excellent video. I don’t stop getting amazed by the quality of your prints and paint jobs. I hope don’t mind a couple questions. How do you get those perfect prints? I vídeo maybe on how to? I’m tired of watching a ton of videos on how to till the pieces on the program (chitubox, lychee…) 45 degrees….or whatever…so we don’t get those annoying print lines, and at the ends they always appear somewhere on the figure 😢 do you varnish with satin the final paint job? It looks to me so in the final captures. And the perfect clean paint job you achieve it by painting many thin coats? Thanks a lot for your content. And sorry for the long comment/questions, hope does not bother you.
@Groundeffected
2 жыл бұрын
I still sand my prints most of the time. It’s almost impossible to print without lines. I use satin and Matt depending on the application. As for the thin coats that’s the best way I’ve found to make sure there’s no brush strokes but that has to be mixed with brush control too I think to provide best results.
@josealmazan1592
2 жыл бұрын
@@GroundeffectedBrent, thank you so much for taking the time to answer, very helpful info indeed 🙏🏼
@Groundeffected
2 жыл бұрын
@@josealmazan1592 sure man no problem at all
@dadoffour
Жыл бұрын
So fucking good
@dimitriossakarellos8332
Жыл бұрын
how long do i have to wait before i apply masking tape? Cause sometimes when i unmask some spots also pealing paint from underneath..
@sergeyrozin8512
2 жыл бұрын
Супер работа
@Francois_Le_Blendeur
8 ай бұрын
What yellow did you use for the lines?
@shaun64084
2 жыл бұрын
Awesome work, what glue do you use?
@Groundeffected
2 жыл бұрын
Thank you. I use Normal super glue the medium one. And I use two part epoxy for some bigger parts.
@shaun64084
2 жыл бұрын
@@Groundeffected Thanks for the reply
@Groundeffected
2 жыл бұрын
@@shaun64084 no problem dude!
@TDSaber
2 жыл бұрын
How come I'm never the first to comment lol :) Anyhow, It's an awesome video and another cool project.
@Groundeffected
2 жыл бұрын
Haha that’s hicontrast only job lol. He didn’t make it this video though. Thanks my dude. You gonna be featuring in 2 more vids soon I’ve taken more commissions of your sculpts wink wink.
@TDSaber
2 жыл бұрын
@@Groundeffected I guess I need to work on my timing and practice a bit. lol ...I'll be asking another commission from you soon. :) I love your work.
@hicontrast
2 жыл бұрын
George noooooooooooo
@georgeashcroft
2 жыл бұрын
Hahaha he said you’d be pissed 😂
@hicontrast
2 жыл бұрын
Collusion!! Doesn't count
@dsdkustom8143
2 жыл бұрын
What do use to after print for the big resins?
@Groundeffected
2 жыл бұрын
I’m not sure I understand the question? You mean how do I clean the large prints?
@dsdkustom8143
2 жыл бұрын
@@Groundeffected Yes, sorry about that. How do you clean the resin? Which printer did you use?
@Groundeffected
2 жыл бұрын
@@dsdkustom8143 I use the sonic mighty 4K and i clean in a bucket of alcohol
@dsdkustom8143
2 жыл бұрын
@@Groundeffected Can maybe you make a video on how you clean it?
@Groundeffected
2 жыл бұрын
@@dsdkustom8143 if you look for a video on my channel called cleaning resin prints. It’s more a visual video than a talking one but gives you a good idea
@Hughie1987
2 жыл бұрын
never seen the two fight, wouldnt rogue win? just drain the shit out of her til she dies?
@Groundeffected
2 жыл бұрын
She does. It’s a thing. And rogue keeps her powers for a bit. It is a cool story arch. Thanks for watching my dude.
@Hughie1987
2 жыл бұрын
@@Groundeffected awesome! And no prob it's a good video
@dideovision2314
Жыл бұрын
Dont suppose your selling this are you? Im from UK🙂
@Groundeffected
Жыл бұрын
Thi one is so old and dusty now dude. It wasn’t looked after unfortunately and got dusty and the paint is a bit dull now. If you’re anywhere near littlehampton feel free to come see it but it’s not really for sale especially because it’s all glued together and wouldn’t ship well too
@dideovision2314
Жыл бұрын
I will get in touch via insta dude😎
@georgeashcroft
2 жыл бұрын
First
@georgeashcroft
2 жыл бұрын
Muahaha
@totomen666
6 ай бұрын
Ms Marvel vs Rogue, Captain Marvel isn't real
@Groundeffected
6 ай бұрын
Not sure if you know this. But captain marvel and ms marvel are two completely different characters. Also none of them are real they’re comic book characters.
Пікірлер: 71