Great video. No rambling, straight to the point. Thanks
@jamesbarber4765
7 ай бұрын
The best video I've seen on this subject. Thank man.
@2Point
7 ай бұрын
I appreciate it brother. I do my best 👊😊👍
@danielgrobe
5 жыл бұрын
here is another option, just throwing this out there. you can get blue painters tape, after you space your letters on the table, you can use painters tape, put it over top of the spaced letters on the table, and they will stick to the painters tape, and you can then add the adhesive to the back, and stick them all at once.
@a.j.sciara984
5 жыл бұрын
I'll go one further...instead of tape itself, double sided tape on a more rigid cardboard then stick all at once. Improving on a good idea.
@egar71
4 жыл бұрын
Jepp this is classic signmakin stuff and technique for applying decals end stickers to cars and so on.
@t.sorvig3540
4 жыл бұрын
I was literally about to say this after he used the level...
@AdamOutlaw87
3 жыл бұрын
Buy new ones and install it as a badge quick and easy no individual bullshit headache BOOM
@felipegalvan2718
5 жыл бұрын
Your video was helpful in rebadging an Altima I bought which was shaved of all emblems. Thanks.
@a.j.sciara984
5 жыл бұрын
Simply, logical and effective. It worked great. Thanks!
@Fuck_Tarentum_Boro
4 жыл бұрын
Thanks! Will be taking on the task of replacing my stock chrome door/tailgate letters once my black letters arrive in the mail. The truck is dark blue and i bed lined the chrome grille, the chrome on front and rear bumpers, and the stock steel wheels, the bowtie badges are carbon fiber.
@darrelladams4686
5 жыл бұрын
Great information. Have a 2018 Silverado and I wanted to put the 6.2 L emblems on it. That worked perfectly thank you
@2Point
5 жыл бұрын
Darrell Adams Thanks bud Glad to hear it worked out
@dylanmihalitsas7104
3 жыл бұрын
Is there any sort of template for the badges I can find somewhere I already removed them and bought new ones on eBay I want to have them eacactly where the factory places them
@lloydbailey7140
Жыл бұрын
Thanks for a simple but very effective vid
@Samuelfish2k
5 жыл бұрын
Great tutorial.👍🏽
@kentashabrowne9411
2 жыл бұрын
Dude i like you,short and wseet and simple if people didn't know..
@pamelagarland680
5 жыл бұрын
Where can I find these size Alphabet lettering for a poster board.
@tigeabenton2174
2 жыл бұрын
Short and 2 the point. That’s wusup lol. Thanks for the tips!
@Aucklandsaltwaterflyfishing
4 жыл бұрын
I like your attention to detail but would it now make sense as the letters are now set on your table to put a strip of masking tape across the letters and then transfer them to the car.
@phillipblades6784
Жыл бұрын
I’m changing the badges on my 2005 Silverado to the ones that are on the 2007 Silverado. I don’t like the 2005 ones at all. Your video was exactly what I needed to see. You are showing the exact same badges that I am going to put on my truck. Thanks for your help.
@2Point
Жыл бұрын
Right on I redid a 2007 slightly Put the updated bow tie on the back. And covered the grill bow tie with a layer of adhesive vinyl. It cost me probably $30 total and two hours of time. It looked like the truck had thousands of dollars worth of restoration work done afterwards.
@phillipblades6784
Жыл бұрын
@@2Point My goal is to clone a 2007 Silverado classic, but also use the badges for the new body style 2007. I’m using the 2007 tailgate bow tie also. There are many instructional videos on KZitem about changing the hood and grille, but yours is the only one I’ve found that shows the exact badges I’m using on the doors and tailgate. I measured a truck with them to learn that the left edge of the S is at 3 3/4 inches from the front of the door. I guess that on the other side, it’s the right side of the O at that position. I hope you can show one on how to get the bow tie on correctly also. Thanks again for your help.
@2Point
Жыл бұрын
@@phillipblades6784 I assume that you’re talking about the bowtie on the tailgate Since I placed a bowtie on there that didn’t normally come on that model, there was no measurements or anything to benchmark from. I just used double-sided, sticky tape to stick it on there temporarily, repeatedly, marking the height and taking pictures. After I had about five different pictures, I picked out the one that I liked and installed it at the marked height. I would send you pictures, but I gave that truck to my mom and she lives about 1000 miles away.
@phillipblades6784
Жыл бұрын
@@2Point Thank you for the instructions. I never would’ve thought of that idea myself. Put it on temporarily, take pictures and notes. And measure from the bottom of the tailgate to the bottom of both sides of the bow tie. The left/right center of the gate is easier to find because of the bow tie’s center crease. Thanks again.
@anthonyholmes71
5 ай бұрын
Great idea
@SPHINX144
3 жыл бұрын
Great tips. I need to this with new "v8 kompressor" badges. Is this the same method used by dealership?
@azealmcfall690
Жыл бұрын
Useful; thanks.
@Tony-ow3if
2 ай бұрын
Very too the point gr8
@mr.fishfish570
3 жыл бұрын
thank you!!
@FathaSun
4 жыл бұрын
Late to this party but to get exact measure and placement take a piece of paper and hold it over the letters while they are still on the vehicle. Take a pencil and trace over to create a template.
@EazyEHBK
6 жыл бұрын
Been subscribed since the back cracking video, just recently bought a Toyota Celica and was going to paint the badges and emblems, thanks a lot! Hey and if you have any more tips on cracking your back, another video would be appreciated!
@2Point
6 жыл бұрын
EazyEHBK if you want to change the color of your badges, leave the badges on the car and use plasti dip
@EazyEHBK
6 жыл бұрын
Jeremy Zuther just finished it up! I really appreciate it! If you have any tips on breaking in a baseball glove, that'd be awesome!
@2Point
6 жыл бұрын
EazyEHBK haha it's crazy that you ask that I coach two baseball teams. The most important thing to consider when purchasing a baseball glove glove is it's pliability. Especially for children. I like the Mizuno Power Close series. They are made of fake leather that will not last a lifetime but they give great performance for a few years. If you've already bought the glove, I 'd pick up a rubber mallet at a home-improvement store and just get to work. Cheers
@joseescobar3390
3 жыл бұрын
lol. perfect. thx a bunch.
@mac2dc1
4 жыл бұрын
What's the brand on the glue you used to put them all back on? Where can you buy it.
@AntonioVillaretardo
4 жыл бұрын
I've used that exact glue and within two weeks the letter fell off again.
@mallen6526
3 жыл бұрын
@@AntonioVillaretardo the glue must have lost its shelf life i guess....
@TarePandaHelp
2 жыл бұрын
Thanks boss
@rt2255
Жыл бұрын
I want to replace emblems with stickers, where do i go. No one local cuts vinyl that small. Most do large lettering. Any ideas ? Thanks
@2Point
Жыл бұрын
Lots of vinyl people on eBay. I would just search custom vinyl lettering
@rt2255
Жыл бұрын
@@2Point i have, have not found one that can specify products. So many companies but no direct answers yet, but thanks.
@kevinbryant6459
3 жыл бұрын
Wow! Rite on
@rickrod4701
5 жыл бұрын
How much is the spacing between letters?
@dunebasher1971
4 жыл бұрын
It's going to be different for every badge. You just have to measure it before you take the letters off the car.
@sistercalhoun4444
3 жыл бұрын
Where can you buy decor letters what store sell them ?
@2Point
3 жыл бұрын
Ebay
@jaimerodrigovelderrain6464
5 жыл бұрын
Do you know separation between letters?
@chupposity
4 жыл бұрын
To address this I would measure them before removing from the vehicle. If that is not possible maybe you know someone else who has same vehicle where you could measure
@hawlhu
6 жыл бұрын
很讚的說
@2Point
5 жыл бұрын
eBay Car badge letters
@darnanarda8902
5 жыл бұрын
What's the size of the letters? 25mm or 45mm?
@vincemount6802
2 жыл бұрын
WOOF!
@Miles-mf9kg
5 жыл бұрын
you pointed to the dislike button so i clicked it.
Пікірлер: 56