Cara Aktifkan AutoTidur Di solder Mustool MT 883
Assalamualaikum warahmatullahi wabarakatuh,
Di video kali ini saya akan mengulas tentang Solder Mostul MT883 yg tidak bisa Autotidur, Autosleep, Autoff, saya cari informasi tentang solder tersebut di google, di youtube, deskripsi di toko online, gak ketemu, ternyata jawabanya ada di kardusnya, smoga deskripsi ini bisa membantu, jangan lupa like, komen, subscribe, aktifkan tanda loncengnya kawan, Terimakasih 🙏🙏
Ini buku panduan Solder Mustool Mt883 👇
( 1 ) PERFORMANCE PARAMETER
[working voltage] AC240-200V 50HZ
[output power) Constant temperature work 80W
[security assurance] Gb standard 3-core plug anticreep anti-static [breakdown voltage] more than 1200V
[total weight] 128g(Contains soldering tip, heater and power cord)
[ temperature range] centigrade180-480°C
[temperature correction] After calibrating the temperature, the error is less than +4°C
[specification of loro head] Use the 900 series soldering tips
[heating core] 936Hheating core
[The tin time] 18-20 s
[Replacement of heating head] Direct plug-in (Socket connection) [failure warning] Poor contact of power socket EUS
EAO Heater break
E01 Strong electromagnetic interference
__________________________________
( 2 ) OPERATING INSTRUCTIONS
[Temperature setting operation]
When you press red "+" the temperature will increase by 1 degree,When long press the "+" button, the temperature increases continuously.
Press the white "-"key to decrease the temperature by 1 degree,
while long press the key to decrease the temperature continuously.
When the button is not pressed for 3 seconds, the new set temperature will be memorized, and the temperature will be
maintained for the next time.
When the "F" or "C" symbol flashing, it means that the heating core temperature setting of degree has not been achieved, When the heater reaches a constant temperature of about 30-50
seconds, soldering tip temperature reaches the set value.
[Temperature calibration operation] 1. After 90 seconds of power on, put the soldering tip on the thermometer, and add solder (appropriate amount) on the soldering tip to make full contact between the thermoelectricity of the thermometer and the soldering tip
2. When the temperature of the thermometer is stable (about 2-4
seconds), write down the temperature of the thermometer.
3. Remove the soldering iron from the thermometer and press
and + to enter the temperature adjustment interface.
4. Input adjustment. (see example) 5. Press- and "+" to exit the temperature calibration interface.
For example when setting temperature of 290° C and the measured at 282 ° C, the calibration steps are as follows
1. Press "-" and "+" at the same time to enter the temperature
calibration interface
2, press the "+" button until the LCD display 8°C 3.Press "-" and "+" to exit the temperature calibration interface.(temperature calibration completed) For example when setting temperature of 290 ° C and the measured at 300°C, the steps are as follows:
1. Press "-" and "+" at the same time to enter the temperature calibration interface.
2, press the button until the LCD display -10 °C
3.Press - and + to exit the temperature calibration interface.(temperature calibration completed) It is best to calibrate the temperature at 320 degrees to ensure
good linearity across the temperature control range.
__________________________________
( 3 ) PARAMETER SETTING
Press the red and white buttons at the same time without power on. When the power is on, release the red and white buttons when you see the LCD display.Enter the Settings menu. The LCD display "C." or "* F*
According to the white button to choose * C* or ** F.* C*
representative degrees Celsius, *F on behalf of Fahrenheit, at
the same time, press the red and white button save these settings
and launch a set menu. In the setting state, to ensure safety, the soldering iron will stop heating, and it will start heating after exiting the setting menu.
__________________________________
( 4 ) PRECAUTIONS
Put the electric iron on the iron rack for 5 minutes and enter the stop heating state (sleep state). Immediately activate the startup program under the display screen of the handgrip and start heating. The electric
iron is in normal working state. Be sure to separate the power plug and socket of the soldering iron when replacing the heating element, otherwise there will be the risk of scald and electric shock.
#
kalibrasi mustool mt883,kalibrasi solder mustool mt883,cara kalibrasi solder mustool mt883,cara kalibrasi solder pintar,Mustool mt883 tidak bisa autooff,mustool mt883 tidak bisa autosleep,autotidur mustool mt883,autooff,autotidur,autosleep,solder mustool mt883,cara aktifkan solder mustool Mt 883,Autotidur tidak bekerja,Autosleep not work,Solder Mustool Mt883,kalibrasi solder mustool,
Негізгі бет Cara Aktifkan AutoTidur Di Solder Mustool MT 883
No video
Пікірлер: 59