A great video! It will help a lot of people out there . Just one thing with pvc pipe , always use the red primer before the blue glue ,not important on this job but if you were running water you have the possibility of the joint cracking, vibration is a killer on these joints ! All the best
@kevinroberts2395
Жыл бұрын
Great idea for storage. I cut our 10m hose into a 6m and 4m. Rarely do I need 10m but have a joiner for when I do.
@phillipevans-n5r
10 ай бұрын
We store ours inside the rectangular chassis rails on our jayco. Just extend with a short bit of pvc to the rear of the van for easy access. Had to remove some of the teck screws through the chassis rails and cut the tips off and re- install so they didnt catch on the pipe as it slid in.
@loukennedy9058
Жыл бұрын
Excellent video , thanks for the tip mate 👍
@iainhetherington4608
2 жыл бұрын
Hi mate it’s a good idea and works well we put a hole at the front and one at the rear in the caps to let the smell blow out while you drive and also put some tin on the front cap to stop stones breaking it, made it from 90mm storm fits 4 lengths of sullage hose with joiners on Cheers
@markward38
Жыл бұрын
Well done , can you tell me what I should ask for when I go to the hardware store what size pipe reducer and screw on cap I should ask for?
@onapowertrip
Жыл бұрын
I did a multi size adaptor and a 90mm screw on cap, I think I used 60mm conduit, but just check what clearance you have to fit it under your van
Пікірлер: 10