This guy has made a very hard task look easy. Dont be fooled, its really hard. Thumbs up.
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! That's right. Making carbon fiber parts takes a lot of time and devotion. And it is a difficult task. However, I want to share the knowledge I know with people. Thank you for watching.
@minhajuddin1769
4 жыл бұрын
Loving the videos so much that it’s inspired me to try it out! Could you please include the exact ingredients and amount used with each step in the description in future videos?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! The mixing ratio of epoxy resin varies depending on the manufacturer and product. I will try to add more details in the other parts. Thank you for watching.
@flippy9133
4 жыл бұрын
I feel like this is the knife making guy, who just got really rich from the knife making videos, and now he turns everything to carbon
@Xxassass1n021xX
4 жыл бұрын
Wish it was me
@tarekz9992
4 жыл бұрын
Same, thought it was him but seems this guy just copies his style
@rstezza
4 жыл бұрын
What’s this knife making guys KZitem channel??
@tancakar8987
4 жыл бұрын
good idea to remove air bubbles i usually warm up the epoxy before mix, but this is great too!
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! Thanks for the compliment. I'm using several methods to get rid of air bubbles. Using hot water is very simple and easy. We also use gas torch and heating gun. Thank you for watching.
4 жыл бұрын
Thank you. X5 owner, have lacked courage, now I'll try it.
@adamwoodworth5758
3 жыл бұрын
Wow...real carbon fiber...not that plastic stuff.... impressed. Bet that will last. How well does it survive in a hot environment. My plastic over wood melted in Arizona...sadly it would be too difficult for me to use this method to fix my situation.
@ter3360
4 жыл бұрын
My mate done this on a few old mini parts and it shocked me. Top job and balls being fairly new car👌
@andrea8498
4 жыл бұрын
Fantastico, bravo quando hai scartavetrato il pomello e il supporto del cambio però stavo male bel lavoro Complimenti
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! Thank you so much. I'm will make a fun and informative video. Stay tuned to my channel. Thank you for watching.
@andrea8498
4 жыл бұрын
@@ECOLAPStudio absolutely, for my rc plane and Alfa 156 😁😁🏋🏋🏋💪💪
@jumuworks
Жыл бұрын
That hot water trick is great!
@DOUBLESTACKDIABLO
4 жыл бұрын
Dude hell yeah!! Keep up the good work , you’ll be at a million followers in no time !!
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! Thank you so much!! It's okay if my channel isn't a million subscribers. I just want to share fun and information with many people. Please, Look forward to the next video. Thanks for watching.
@sf1projects
4 жыл бұрын
Love your videos, can I substitute the gel coat with spray glue? Just to stick the carbon fiber cloth to the product. Thanks!
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! it's possible. However, apply epoxy resin after the spray adhesive has cured completely. I hope you helpful.
@sf1projects
4 жыл бұрын
@@ECOLAPStudio Thank you!
@doubleplay06
4 жыл бұрын
대단하시네요. 기계 공구도 없이 수작업으로만 저런 퀄리티가 나온다니... 카본 원단자체가 워낙 비싸다고 들었는데...
@Genny_B
2 жыл бұрын
It’s actually not really expensive, prices are between 25-50$ per yard
@teoyota
4 жыл бұрын
How essential is the gel coat to your projects? Can it be skipped most of the time, or maybe use resin instead? Do you ever bake your carbon or just let it dry at room temp. Do you clear coat the parts or always use uv resin as top layer?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy~ The gelcoat is very important in carbon fiber skinning. In carbon fiber skinning, It can attachment replace to epoxy resins or spray adhesives. But, The black gelcoat can cover the surface of the parts in black. If the base color of the parts is not black or darkness color, the base color may look fine after carbon fiber skinning. Also, the gelcoat is very strong. The finish of the surface uses epoxy resin topcoat or clear car spray. I think the best surface finish is the epoxy resin topcoat. Because epoxy resins make a stronger surface than clear sprays. I hope you helpful.
@marcosamaral8701
3 жыл бұрын
Olá moro aqui no Brasil, e queria revestir o acabamento central do painel do meu carro de carbono,e procurei vários tutoriais até chegar no seus vídeos,em fim notei que você sempre usa pra um ótimo acabamento da fibra na peça o gel coat epóxi o preto que você passa e aguarda até que ele fique pregando certo? Procurei aqui no Brasil em várias lojas mas não tem o produto! Você me indicaria qual pra usar no lugar dele pra que o substituísse?
@jotapejoaopaulo3629
2 жыл бұрын
olá, muito legal seu trabalho, parabéns! só gostaria de saber , qual é o material que vc utilizou na primeira camada ,antes de colocar o tecido carbono . vi que ele tem a cor aparentemente preto ? E faz com que, o tecido carbono adere com facilidade. agradeço, caso vc possa me dizer.! abraço!
@hipijs1337
4 жыл бұрын
Great video! Really inspired me to do some carbon skinning too, thank you very much!
@sanchitrathi7062
3 жыл бұрын
Hi, great video! I wanted to know if theres any difference between Epoxy Gelcoat that you use and Epoxy basecoat. Or are they the same things with different names?
@myCarModsBestPrice
4 жыл бұрын
you are the real diy BOSS
@JoseCruz-dk3fi
4 жыл бұрын
Outstanding job my friend. I've been watching a lot of your videos and you do such a great job all the time.
@nelsonnotforyou7632
10 ай бұрын
I saw your video, but you only said the material you used, but not the brand so I can see if I have the same or similar in my region... can you tell me? I'll have to make one, because Chevrolet doesn't just sell the Shift Knob? Chevrolet is forcing you to sell the complete automatic transmission.
@joebloggs4191
4 жыл бұрын
Another amazing job! I see on your video you leave the carbon fibre 'hanging' over the edges of the trim piece and then cut the excess off with a knife whereas on other videos I have seen they tuck the cloth underneath the trim piece and tape it and then cut it off with a knife or Dremel like tool. Which way is easier or better?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I use both knives and dremel depending on the situation. I usually use knives and Dremel for those that cannot be cut with a knife. I hope you helpful.
@Catchmyep3
4 жыл бұрын
So, do you ever have that moment before you start sanding the original BMW covers, where you stop and question if you want to continue?
@pelandukhutan3498
4 жыл бұрын
Woww...very nice and beautiful..
@santiferret2851
4 жыл бұрын
M’ha encantat aquest vídeo, molt ben fet i a l’hora divertit. Felicitats
@VannessThao1988
4 жыл бұрын
Very good video. I want to know the brand of the resin and epoxy you're using. I want to order them and try out sometime. If you dont mind to link all the materials that you are using. Thanks
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I'm buying the materials from online shop in Korea. However, Korean online shops do not ship overseas. So I introduce you UK online shop. Maybe you can find what you want. I hope you helpful. www.easycomposites.co.uk/
@VannessThao1988
4 жыл бұрын
@@ECOLAPStudio alright thanks buddy
@b1ejc
4 жыл бұрын
Can you do one video for plastic around buttons on steering wheel or something very small like details? Pumped up for next video!
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! The skinning of small parts is also not very different. I think trimming is an important part of skinning small parts. If I get a chance, I'll make a video. Thank you for watching.
@shukryghany
4 жыл бұрын
Loving your work buddy! Learning few tricks here and there. Gonna do one tomorrow. Hope everything goes well. Anyway, just wondering how do you clean/wash the brushes from epoxy resin & hardener? Care to share?
@jakefromstatefarm9721
4 жыл бұрын
im curious how well the epoxy bonds to the plastic surfaces, especially considering these are areas that get handled often.
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! When skinning carbon fiber, it is important to scratch the surface of the plastic parts by using very rough sandpaper. The gel coat is absorbed by the strong scratches and helps to firmly attach the carbon fiber cloth.
@diphexu1760
4 жыл бұрын
@@ECOLAPStudio hi,I recommend that the surface needs sandblasting at least ,Because the black glue is difficult to adhere at the chrome surface。 Sanding with sandpaper does‘t achieve sufficient roughness
@samuele4036
Жыл бұрын
Hello i like your video and i want to know the brand of the hardner you use (the black hardner) thank you!
@2k5mike
4 жыл бұрын
Do you know how to tell the difference between carbon fiber and black kevlar
@zache8135
4 жыл бұрын
You should put everything used in the description
@ahmadnabil1332
4 жыл бұрын
What epoxy resin do you prefer to work with? I don't want to buy bad epoxy resin and regret it all. THNKS
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I purchased materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html I hope you helpful.
@frysinclairmobilemechanic7732
4 жыл бұрын
Hi Mate, Looks very smart & professionally done! Cant you tell me the name on the song at the start..? I seem to recognise it from somewhere, Cheers!!
@knab1sss
4 жыл бұрын
Классная работа, ты использовал гелькоут с эпоксидной смолой как состав для адгезии? Какие пропорции смешивания?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! All epoxy resins and gel coats vary by manufacturer. The mixing ratio is usually indicated on the epoxy.
@tobikichi
4 жыл бұрын
かっこいい!日本からのコメントでした! It was a cool comment from Japan!
@carvideosgermany6359
3 жыл бұрын
Vor dem trimming mit welchen schleifpapier hast du geschliffen? Und was meinst mit leveling? 400,600,800er schleifen
@Rich77UK
2 жыл бұрын
Ouch, sanding bavarias finest vacuum metalised parts. Worth it though as it looks great at the end. Good job mate.
@jvvb28
4 жыл бұрын
Hi, quick question, when you applied the clear coat, how many layers you apply and did you do something extra to get that gloss?. Thanks.
@MegaNursen
3 жыл бұрын
I have the same question
@themanthelegend7048
3 жыл бұрын
Probably 4. You sand it smooth but want as few layers as possible. Really it's up to you. Don't sand through to t carbon fiber.
@zcong3402
3 жыл бұрын
I wonder if anyone ever gave it a go after watching this video? Nice work mate btw!
@xloboxx
4 жыл бұрын
¿No queda marca de la lija?. Yo lo hago igual y se queda marca que se ve al sol. ¿No es mejor lijar cuando hay mas capas de resina?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! There are no sandpaper marks on my parts. The epoxy resin penetrates the scratch and cannot be seen with the eyes.
@josssamperio1283
4 жыл бұрын
E hecho mis propias piezas con fibra de carbono Gracias a tus vídeos Saludos desde México Deberías hacer video para un difusor o alerón amigo
@zepryo
Жыл бұрын
bmw純正のカーボンパネルと遜色ないクオリティ!やってみたくなる!
@orangemerc
4 жыл бұрын
Gr8 work .. fabulous finishing
@ECOLAPStudio
4 жыл бұрын
+Ahmed Sebaei Hello buddy!! Thank you for watching! I hope you watch other videos on the channel. And I'll make a good video so look forward to it! Thank you!!
@orangemerc
4 жыл бұрын
Can you share the type of epoxy used for your products
@ECOLAPStudio
4 жыл бұрын
+Ahmed Sebaei I am using a gelcoat resoltech product Epoxy resins are produced in Korea. I can tell you about the UK website because what is sold in Korea cannot be shipped overseas. Maybe you can find what you want. www.easycomposites.co.uk/
@nico.s7333
4 жыл бұрын
Are mixing every 2 hours new epoxy resin Or do you use the same mixed stuff all the time. Why arent you using the vacuum pump this time ?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! A new epoxy resin should be mixed every 2-3 hours. The gear knob and the gear plate did not have many curved surfaces, so it was possible without a vacuum bag. I also wanted to make trimming easier. For parts with many curved surfaces, it is recommended to attach a carbon fiber cloth using a vacuum bag.
@nico.s7333
4 жыл бұрын
@@ECOLAPStudio when do i use the vacuum bag...in what step exactly ? Do you use sandpaper between every epoxy resin painting, or only first time and then just paint and paint....Happy eastern
@chanyongchuen2270
3 жыл бұрын
Hi bro, what is the difference between 200gsm and 240gsm twill carbon fiber fabric?
@messi3509
4 жыл бұрын
재료 한글로 좀 부탁드립니다 ㅎㅎ 주말에 밖에도 못 나가는데.. 이것나 한번해봐야겠네요 ㅎㅎ.. 맨날 시트지만 했는데 ㅋㅋ 신세계입니다^^
@LosDaGhostGaming
4 жыл бұрын
just a question.. could i use vivid carbon fiber vinyl wrap and add epoxy to give it that feel and texture and shine?
@Ez-sk8ig
4 жыл бұрын
The carbon has thousands of fibers that catch light from different angles, vinyl will never be able to reproduce that... sure you can epoxy over vinyl to get the thickness and smoothness, but the light will show the difference... and if you are going to epoxy over vinyl, why not just use carbon, you can practice with regular fiberglass to learn techniques if you feel the real carbon is too expensive. Of course you can just use carbon vinyl wrap and know that it's not real carbon.
@sahalayamon
3 ай бұрын
Can we remove the iron part with only carbon fibre ?
@360supafly
4 жыл бұрын
Real Man Used Carbon 👍🔥🔥
@bluedevil305
2 жыл бұрын
Looks like you used weblock carbon fiber in the video?
@blakewilson3062
Жыл бұрын
Do you have the links for all the things to include the carbon fiber to purchase the items needed ?
@douglasrho5619
2 жыл бұрын
Hi! Do you sand 400 grit and finish with uv top coat? It very glossy nice finish but you do different finish in other video!
@ECOLAPStudio
2 жыл бұрын
Hello friend. Sand with P400~ P600 or P1000 sandpaper and spray with clear spray.
@bernardbernard7249
4 жыл бұрын
You Are un artist !
@tuned_auto
3 жыл бұрын
Is there a reason you didn't vacuum bag these parts?
@nancysmith9487
3 жыл бұрын
Wow turned out really nice... thank you for sharing
@initial_n__8143
2 жыл бұрын
와 진짜 멋져요.. 다이 끝판왕이네요
@marcopinotti2555
Жыл бұрын
Bel lavoro complimenti.
@NeedleDrop87
4 жыл бұрын
Amazing work! I'm going to try this on my s5 interior aha where did you get the 3m carbon fiber cloth material?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. Also, if you want skinning, I recommend 240g carbon fiber cloth. www.easycomposites.co.uk/
@Nodrama92
4 жыл бұрын
I'm doing the same 😂 Audi S5 you mean or ?
@georgesfaucher8527
3 жыл бұрын
@@ECOLAPStudio ï
@rollieazanion1975
4 жыл бұрын
Can i ask a favor please?what is the exact name of the product you’ve been using?can i buy that product online?
@punkuk1979
3 жыл бұрын
A link to to products you use would be helpful
@AaronOffRoad
5 жыл бұрын
Please, we need a video tutorial on how to make a carbon fiber car steering wheel. There is none on the internet
@eafne
4 жыл бұрын
Hola podrias indicar donde consigues los materiales? Quiero empezar ha frabricarme alguna cosa en carbono también. Gracias un saludo
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. Also, if you want skinning, I recommend 240g carbon fiber cloth. www.easycomposites.co.uk/
@dorualin4847
4 жыл бұрын
Hello, do you do any of that jobs to out or it's just for yourself???
@IuriGennaro
3 жыл бұрын
Ficou muito bom seu trabalho belo acabamento, parabéns.
@hoangthienang1176
4 жыл бұрын
Wow It’s really nice
@ricardoprieto9034
3 жыл бұрын
Top demais cara! Parabéns, vou chegar nesse nivel ainda!
@shaka1997
4 жыл бұрын
Hi, great videos, when you skin car trim pieces in carbon fibre, how much thickness does it add to the piece? Thanks
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! When skinning, carbon fiber uses one layer. It is very thin and is approximately 0.3-0.5 mm thick. It's just skinning, so it doesn't care about thickness, weight, and stiffness.
@evanweatherford2360
3 жыл бұрын
Hello can you tell me where you got the products from? The epoxy resin?
@lookaround_00
4 жыл бұрын
看完對碳纖維的伸展性有更了解. 很有趣.
@EvgenyMuryshkin
4 жыл бұрын
When you apply coating every 2-3 hours, do you mix a fresh one every time or just make one portion at the beginning and then store somewhere?
@GermanTopGameTV
4 жыл бұрын
You mix a new one every time as it starts to harden within this time, and so does the left over bit in your cup. Just mix very small amounts, so your waste doesn't become too big. Or make many parts at the same time, that also cuts down on waste :)
@christianperles9780
4 жыл бұрын
Wow very impressive. What rear diffuser do you have?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! My car has installed Varis diffuser and BMW M Performance diffuser. Varis diffuser is tough design. I hope you helpful. Thank you for watching.
@christianperles9780
4 жыл бұрын
ECO-LAP Studio thanks man! Is it authentic varis or rep?
@ECOLAPStudio
4 жыл бұрын
+Christian Perles Varis is rep. M performance is genuine. ^^
@christianperles9780
4 жыл бұрын
ECO-LAP Studio nice! Do you remember where u got it from?
@ECOLAPStudio
4 жыл бұрын
+Christian Perles The varis made in Taiwan. I got via Korean importer. I think you can find out on ebay or aliexpress. But I'm not sure that's quality.
@Jaluku
4 жыл бұрын
Very nice video! Looks good! How did you get the carbon fiber cloth? Keep up the nice video's
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. Also, if you want skinning, I recommend 240g carbon fiber cloth. www.easycomposites.co.uk/
@Jaluku
4 жыл бұрын
@@ECOLAPStudio thanks. I will take a look at it!
@munich_zpeed
3 жыл бұрын
Great Videos! Apreciate that you dont use stupid music :) Another question. My BMW M2 has this raw Carbon Fiber. How do I skin this? Just step 1 after gel coat, but what about the edges? They will come lose and dont be smooth.
@bovicheth3
3 жыл бұрын
professional work 😍
@kaiksondapazsilva5825
4 жыл бұрын
Hello! From Brazil I like see your videos, your style that make videos.
@WeddingFilmmaker
4 жыл бұрын
Did you sand and polish after the final epoxy coat? My final final coat never comes out that clean!
@milcent100
4 жыл бұрын
waiting on this reply too ^^
@eikmalanwar306
4 жыл бұрын
Only apply resin in 6:18minutes ? no need mix with hardener? pls reply me. done subs and like
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! The epoxy resin must be mixed with the hardener. If it is not mixed with the hardener, it will not cure.
how u clean the brush after using it?????? or u just throw it away? pls reply uurgent :(
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I usually do not reuse used brushes. So I bought and used a lot of cheap brushes. The brush I use is about 40 cents. We recommend that the brush is soft.
@eikmalanwar306
4 жыл бұрын
@@ECOLAPStudio i see. last question my friend. the ending u using topcoat anti uv without spray clear? i tried to find that thing in my country (malaysia) but i cant find one. do u have any recommend brand ??
@themanthelegend7048
3 жыл бұрын
Why not pull the whole center consol out and make one of those?
@pedrosaobento3328
4 жыл бұрын
Why use gelcoat black for glue and dont use epoxy resin?
@ECOLAPStudio
4 жыл бұрын
There are several reasons for using a black epoxy gel coat. First, it is black so you can cover the base color of the parts. If the base color is not black, you may see the base color between the carbon fibers after skinning. Second, gelcoat has a very high viscosity. Epoxy resin with low viscosity can cause epoxy resin to flow down of parts. I hope you helpful. Thank you for watching.
@b1ejc
4 жыл бұрын
Did you cut the hole on the shift knob with knife too?
@ECOLAPStudio
4 жыл бұрын
Yes. I cut a hole with a knife. ^^
@martinsivek9802
4 жыл бұрын
looks so easy...
@limman000
4 жыл бұрын
금손이시네요~ 볼때마다 놀랍습니다.^^
@Zzafari7
4 жыл бұрын
Hello! amazing work my friend, I did something similar for the carbon fiber instead of wood grain on my f30
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! Wood Grain !! You did a wonderful job. Did it use real wood? I'm interested.
@Zzafari7
4 жыл бұрын
@@ECOLAPStudio Hello! yes the wood grain on my f30 was burl walnut and it wasa very thin piece of wood with a heavy sort of plastic epoxy overlay
@mattnardo9818
4 жыл бұрын
Hi how did you get the black plate of off the shifter so easily?
@Zzafari7
4 жыл бұрын
Matt Nardo use a trim tool to get under the edge that’s triangle shaped, right next to the traction control button that entire piece comes out
@mattnardo9818
4 жыл бұрын
Zzafari7 I can’t seem to get the black piece with the R,N, D, d/s off the top of the shifter. The video made it look so easy with a screwdriver but I can’t manage to pry it off. 😅
@oneonly2361
3 жыл бұрын
겔코트는 원단의 접착력을 위해서 바르는건가요?
@Crossy7971
4 жыл бұрын
이거 만질때마다 기분좋겠네요
@ECOLAPStudio
4 жыл бұрын
안녕하세요! 정품과 비교했을 때 완벽하다고 볼 수는 없지만 직접 만들었다는 게 볼 때마다 뿌듯함이 느껴집니다^^ 시청해주셔서 감사합니다.
@cf1799
4 жыл бұрын
Beautiful work do you do this for customers?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I am not a carbon fiber seller. I study carbon fiber myself and do various tests. My knowledge may not be perfect, but I would like to share my knowledge with many people.
@david07121975
4 жыл бұрын
Super. Thanks
@divinemotorsport
4 жыл бұрын
Is there any specific forms of carbon fiber sheets you recommend? Looking to do this myself
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! When skinning carbon fiber, 240g of carbon fiber is recommended. That's twill, weave is your taste.
@gogogogy8080
4 жыл бұрын
war das kleber?? am anfang mit farbe?
@XristoforosMoisidis
4 жыл бұрын
why the gelcoat in the beggining?
@vert_ck
4 жыл бұрын
в каких пропорциях делаются обычно смеси?
@유준수-h5f
4 жыл бұрын
잘보고잇습니다. 어떤 회사 자제들과 정확한 명칭들을 알수 잇을까요?
@ECOLAPStudio
4 жыл бұрын
안녕하세요! 영상에 사용한 에폭시는 다음과 같습니다. 리졸텍 7060 에폭시 겔코트 엔폭시 스포츠 에폭시 레진 리졸텍 1070S 에폭시 레진 구매는 저는 화이버맨이라는 온라인 쇼핑몰에서 구매하고 있습니다. 도움이 되셨기를 바랍니다. ^^
@유준수-h5f
4 жыл бұрын
@@ECOLAPStudio 감사합니다. 저도 카본을 만지작거리고잇어서요!!
@denchoo305
4 жыл бұрын
May i know can the cup of resin hardener last for every few hours for the application? Or i need to mix a new cup after every 2 hours?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! You need to mix a new cup every 2-3 hours.(half-cured)
@irhambisribisri7077
3 жыл бұрын
good job I like ...🇮🇩🇮🇩🇮🇩🇮🇩
@edmark8879
3 жыл бұрын
I hope i can sand that fast like you
@billtran8357
4 жыл бұрын
I can't seem to find the gelcoat? Is there any way I can use JUST the epoxy resin and hardener?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! The gel coat can cover the base color of the parts. If your parts are black, you can use epoxy resin. If not black, paint with black and then use epoxy resin.
Пікірлер: 359