It is so much easier just to use CARBON FIBER material with fiberglass hardeners over a mold. No, it’s not gonna have the same strength, but it’s gonna have the same look if not better!!
@danieleggett2084
2 жыл бұрын
Subbing mostly because he made tea correctly, and a little bit because the carbon fibre is awesome
@CarbonWorkshops
2 жыл бұрын
😂☕
@FPV-TV419
2 жыл бұрын
Great video! I've always wanted to be able to make this stuff
@nellaRissa
Жыл бұрын
pre preg is the gold standard 😎
@TrustJesus100
6 ай бұрын
Love it!! Im seriously thinking of getting into this, so rewarding!
@japoncae7211
Жыл бұрын
a question ; if we had the materials and tools lik you have , what is the cost of production of this bonnet cooling vent ?
@johannnorris6350
Жыл бұрын
Awesome job love carbon fibre ❤
@wegz6262
2 жыл бұрын
Good job
@stigwelder6142
2 жыл бұрын
Wooh that tea's strong lol Nice work 👍
@CarbonWorkshops
2 жыл бұрын
Proper brew ☕
@The-truth-is-valuable.
Жыл бұрын
Impressive.
@alexruperty7210
2 жыл бұрын
Супер!
@raymundjusay4632
2 жыл бұрын
Very nice work fosho
@anbumohan04
2 жыл бұрын
Nice work
@wegz6262
2 жыл бұрын
You sprayed clear coat? Or more resin?
@CarbonWorkshops
2 жыл бұрын
It's finished with 2k clear coat 👍
@spoolinekrhdhulk-urban-c-w5709
2 жыл бұрын
Love to have some or have some made you know what I mean I made the 3 stage but never put it on 1 piece
@spoolinekrhdhulk-urban-c-w5709
2 жыл бұрын
I'd really like love 💛 to put that on my car ek hatch 96 1bowner Canada and 1 American EK9 96I HAD BITH AND SOMEONE STOLE IT REALLY SPOON ENGINE DART BLOCK AWD CRX ET.
@laurentcrozet2622
Жыл бұрын
hello , great video !! i have a question , when you put the piece in the oven , when you connect the bag to the pipe , is it to inject epoxy resin or is it to remove the air ? thank you
@CarbonWorkshops
Жыл бұрын
The resin is already in then carbon fibre. The hose attached is a vacuum line to remove air.
@keepleft99
2 жыл бұрын
how did you make your moulds?
@CarbonWorkshops
2 жыл бұрын
Please check my other videos
@JordanBrancoo
2 жыл бұрын
Hi, great video, you are really good at it, can you recomend me your lvlp gun and nozzle size ? i am having trouble with my hlp, and clear coating..
@CarbonWorkshops
2 жыл бұрын
Thanks, I use DeVilbiss GTi Pro Lite gun. With TE10 1.2mm cap
@luisGarcia-wl8bk
Жыл бұрын
What kind of spray gun do you use? And what kind of clear do you use? I have an unfinished project that needs a clear coat. Looking for recommendation.
@CarbonWorkshops
Жыл бұрын
I use devilbiss gti pro lite gun. And Lechler 2000 macrofan 2k clear coat
@Composites.Cymru34
2 жыл бұрын
Love the video! What’s the final vacuum bag you use? That’s far easier than the ol’ gumtape lol
@CarbonWorkshops
2 жыл бұрын
Haha good for small parts. They are food vacumm boil bags.
@andrey8513
2 жыл бұрын
How do you make a back side of the part if it has mounting parts or bolt protrusions?
@CarbonWorkshops
2 жыл бұрын
To fit this part the panel would be cut out and the vent would be bonded into position around the lip.
@k4144
Жыл бұрын
Info on the Bag Sealer?
@CarbonWorkshops
Жыл бұрын
Just a standard heat sealing machine.
@stuntdrvr
Жыл бұрын
fuck yeah that looks amazing
@user-fm1rh3ht4v
2 жыл бұрын
Thanks for video! Do you use usual 38% pre-preg for the first layer? Or special 60% saturated prepreg for first layers?
@CarbonWorkshops
2 жыл бұрын
Just standard prepreg, I'm sure it's 38%
@user-fm1rh3ht4v
2 жыл бұрын
@@CarbonWorkshops thanks! Very interesting. This debulking of the first layer eliminates pinholes!
@brianfries5658
Жыл бұрын
HI, l have a 2022 Ford Explorer ST. Would you be interested in making a carbon fiber mirror caps to sell to me?
@Dennis_spl
2 жыл бұрын
My pre peg pieces come dry and with holes. What could be the problem? The molds are in vinylester. Greetings from Italy.
@CarbonWorkshops
2 жыл бұрын
Biggest problem will be the mould, it needs to be epoxy gelcoat for best results
@Dennis_spl
2 жыл бұрын
@@CarbonWorkshops Thanks for the advice. Surely the material is creating problems for me.
@CarbonWorkshops
2 жыл бұрын
@@Dennis_spl what prepreg are you using
@Dennis_spl
2 жыл бұрын
@@CarbonWorkshops excel tc2003t125/m79
@Dennis_spl
2 жыл бұрын
Which side do you recommend to apply the pre peg. Side of paper or plastic film? A thousand thanks
@richardrodriguez3276
2 жыл бұрын
Very cool, it came out great! What is the name of the oven and how much did it cost to get it?
@CarbonWorkshops
2 жыл бұрын
Thanks! The oven is from Easy Composites it's about £1800
@fitodj3380
2 жыл бұрын
@@CarbonWorkshops Hi, any email to contact you?
@CarbonWorkshops
2 жыл бұрын
@@fitodj3380 Carbonworkshops@gmail.com
@Chrisvx220
2 жыл бұрын
What compressor do you use, would you recommend it? My next purchase for this exact job.
@CarbonWorkshops
2 жыл бұрын
Hi, I use this one - "SGS 100 Litre Direct Drive Air Compressor - 14.6CFM 3.0HP 100l" I was told to get direct drive instead of belt driven and get 100L for multiple small parts like the video it can be sprayed on one tank of air. Never had any problems with this one.
@Chrisvx220
2 жыл бұрын
@@CarbonWorkshops awesome much appreciated
@jeffersontaeza2056
2 жыл бұрын
What type of carbon fiber did you use for that project?
@CarbonWorkshops
2 жыл бұрын
Prepreg carbon fibre
@keepleft99
2 жыл бұрын
No release agent at the start?
@CarbonWorkshops
2 жыл бұрын
Yes always start with that every lay up. (must of missed it from the video) 🥺
@keepleft99
2 жыл бұрын
@@CarbonWorkshops what release agent do you use?
@CarbonWorkshops
2 жыл бұрын
@@keepleft99 easy composites easy lease
@TreadTalk247
2 жыл бұрын
Do you take on commissioned work?
@CarbonWorkshops
2 жыл бұрын
Unfortunately not at the moment sorry
@Dense147
2 жыл бұрын
I just did my first part wet with epoxy. This looks a millon times easier lol
@CarbonWorkshops
2 жыл бұрын
Haha yes in some ways prepreg is alot cleaner and neater. But comes with a lot of other issues that could happen 🙈
Пікірлер: 65