Chain is stronger and won’t slip in the mud . Surron is quiet as it is . Maintain it properly , wear a helmet and even some music in one ear and you don’t need to worry about silly belt drives and extra costs . Iv saw people snap those belts many times . Mine still has the gold D.I.D chain I had since new . If it’s not broken don’t fix it Peace
@yuriyb5592
3 жыл бұрын
Yes and no. You are running electric bike which is not perfectly quiet, - belt makes it very quiet. Only motor noise remains. Belt is stronger or as strong as chain. Belt has Immediate torque to regen tension. No oil, no maintenance. Yes it's really expensive 325 usd upgrade, but none of the customers regret a purchase.
@surronzak8154
2 жыл бұрын
@@yuriyb5592 plus you don’t need to do maintenance on it like on a chain, I commute everyday offroad, I’d love to have a belt
@visionlightlab6094
3 жыл бұрын
I like it but you have to cut out a portion of the swingarm frame crossmember to install it (as seen in this video if you look close). This bike is a work of art & I just can't bring myself to do that
@yuriyb5592
3 жыл бұрын
The support to cut is the pedal holding plate. After the cut you reinforce it with the bolt on plate provided. No influence on the structural strengths.
@visionlightlab6094
3 жыл бұрын
@@yuriyb5592 That may be true but it's not as neat as it once was. I do machine art www.visionlightlab.com so I am a bit retentive I guess..
@Chicken_4_Dayz
3 жыл бұрын
I'm very interested in a kit like this, are there any still available
@mareksadowski6835
3 жыл бұрын
Hi. Need buy one. When will be available ?
@johnchocron7326
3 жыл бұрын
espi rocket
@surronzak8154
2 жыл бұрын
Do you have a center track for the primary transmission too ? As the mud guards on the primary drive isn't that good
@yuriyb5592
2 жыл бұрын
No kit for primary. I just use stronger belt and run fine on 15-20 kW
@beathabegger8176
3 ай бұрын
Hi, i don't have FB. Is the Kit still avalilable?
@sorijin
3 жыл бұрын
That warble comes from it being too tight or its part of it?
@yuriyb5592
3 жыл бұрын
Tension on the bearings at the jackshaft caused by 2 belts tension
@ElectroTallinn
2 жыл бұрын
Привет, есть еще в наличии? Питер.
@danparker123
2 жыл бұрын
I am interested in buying this. How do I contact you?
@vinvan123
Жыл бұрын
Hi, I'm interested too und can you tell me where I could buy this silent kit? Thanks
@yuriyb5592
Жыл бұрын
Unfortunately kit is not available. Some parts were made in Ukraine.
@surronzak8154
2 жыл бұрын
Did it really hold up in off road use? What about the MudPort kit from gates ? Do you know something about it ?
@yuriyb5592
2 жыл бұрын
I run my kit long run. Wear is reasonable. Mud port kit is nice, but it holds the belt only on one side, the other side still slips. And of course this belt drive is way cheaper.
@yuriyb5592
2 жыл бұрын
Check Facebook's sur-ron groups, these kits are for sale in USA.
@surronzak8154
2 жыл бұрын
@@yuriyb5592 I'm from europe, can you send it to France ?
@yuriyb5592
2 жыл бұрын
@@surronzak8154 i cannot. I don't have any anymore. It's my friends Aaron who still have some in USA.
@dicktomasko1553
3 жыл бұрын
the 52//the large one..
@yuriyb5592
3 жыл бұрын
We will contact you
@dicktomasko1553
3 жыл бұрын
I need one?
@mre741
3 жыл бұрын
trying to fit the kit right now... on the 19 sprocket which is the inner and outer side??
@yuriyb5592
3 жыл бұрын
Contact me on FB. Outer is with the grove, inner has a step. It's one way fit only
@mre741
3 жыл бұрын
@@yuriyb5592 the bronze sprocket.. i have the flat side on the inside and the side with a lip i have facing outward
@yuriyb5592
3 жыл бұрын
@@mre741 this is not the comfortable way. Lit should go into the groove in the shaft. But it doesn't make a difference in offset, - the sprocket teeth are symmetrical 3mm offset. No need to dismantle. All is good Tell me how you have installed rear sprocket? Was it marked "inside and outside"?
@mre741
3 жыл бұрын
@@yuriyb5592 rear sprocket was not marked... i have it mounted it says 70T on the inside
@mre741
3 жыл бұрын
@@yuriyb5592 i do 10 miles a day and belt still looks new so i must have done something right
@wadafup
2 жыл бұрын
When are these back for sale
@yuriyb5592
2 жыл бұрын
Check on Facebook groups. Aaron should have some
@Disasterless
3 жыл бұрын
When will these be for sale again?
@yuriyb5592
3 жыл бұрын
Those are in USA now. Pls contact Aaron Crosby or me on FB.
@Beire-ij7sh
3 жыл бұрын
hi, where can i find this kit? Do you have a link?
@yuriyb5592
3 жыл бұрын
It's will be on sale on Facebook groups when ready.
@CmdrTigerKing
2 жыл бұрын
do you just source the parts and resell them?
@yuriyb5592
2 жыл бұрын
Nope. It will not work without custom made parts. Some parts are are from market, some custom.
@anthonyklein4601
4 жыл бұрын
what tooth rear "sprocket" is that?
@yuriyb5592
4 жыл бұрын
Carbon Gates cdx 70t sprocket
@vespamax1888
3 жыл бұрын
Hi, I would like to buy your kit, but I am not on FB. Can you contact me please? Thanks!
What is that front sprocket and where can I get one? Thanks
@yuriyb5592
4 жыл бұрын
All sold on FB sur-ron owners worldwide. For sale more later
@TK-OK
4 жыл бұрын
Бу Ля is Dan orlov kit ?
@yuriyb5592
4 жыл бұрын
@@TK-OK my kit. Cheaper and better. That's why all is sold :(
@TK-OK
4 жыл бұрын
Бу Ля would like to get one. Luna kit is geared to high
@yuriyb5592
4 жыл бұрын
@@TK-OK I will inform you when it's available. At least 1 month.
@themanhuntt543
Жыл бұрын
Подскажите какая резина і розмер Pirelli ?
@yuriyb5592
Жыл бұрын
Привет. Та у на видео не Пирелли вроде. Там shinko 244 размер 2.75 19 обод.
@user-gx1vy5ul9u
3 жыл бұрын
Бра где взять такой комплектик?✌️
@yuriyb5592
3 жыл бұрын
Больше не осталось к сожалению. Может на фэбэ в США ещё есть. Глянь группы фэбэ
@alexutemov
3 жыл бұрын
А я поменял все на цепи, вот орет)
@alexutemov
3 жыл бұрын
У меня ремень приводной порвало сразу
@vladimirlysenko1429
3 жыл бұрын
Буля? Буля?!! это правда ты?!!!
@yuriyb5592
3 жыл бұрын
Не понял.. Вова? Ты ли Вова? Не может быть
@vladimirlysenko1429
3 жыл бұрын
@@yuriyb5592 аааа!!! ооо! дай обниму!
@yuriyb5592
3 жыл бұрын
@@vladimirlysenko1429 та ну не гони, Вова Мышш, сколько зим скоко шампанского было выпито?
@yuriyb5592
3 жыл бұрын
@@vladimirlysenko1429 ты не планируешь приехать?
@vladimirlysenko1429
3 жыл бұрын
@@yuriyb5592 я планирую переехать, а куда пока не выбрал, вот думаю Валенсия красивый город
@Reedev
4 жыл бұрын
А как купить такой кит?
@yuriyb5592
4 жыл бұрын
мля. я все продал. будет через 2 недели. я на фб продавал, в группе суррон оунерз вордвайд
@Reedev
4 жыл бұрын
@@yuriyb5592 Ага, сейчас попробую вступить туда. Если что в Питер отправляете? Давно хочу на ремень перейти, но тут с центральным ограничителем - самое то.
@yuriyb5592
4 жыл бұрын
@@Reedev к сожалению набора продаже скоро не будет. Пару месяцев....
@Reedev
4 жыл бұрын
@@yuriyb5592 жаль. ну будем ждать
@2012pez
3 жыл бұрын
Hi im interested in buying one can u pm me when available..thanks
@yuriyb5592
3 жыл бұрын
I will have 5 more within one month. You are in the list to contact.
@2012pez
3 жыл бұрын
Thank u🤙🏻
@2012pez
3 жыл бұрын
Do you have the Gates part numbers for the belts/rear sprockets?
Пікірлер: 85