This is build episode #2 of our build series!
Join us as we install our subflooring, install our MaxxAir fan by cutting a hole in our roof, and install our final ceiling material.
Linktree
linktr.ee/homeiswheretheheart...
Instagram
/ _homeiswheretheheartsare
TikTok
www.tiktok.com/@_homeiswheret...
Thank you @RYOBITOOLSUSA and MaxxAir fan!
0:00 - Intro
0:47 - Beginning of subfloor
1:24 - Subfloor problem we encountered
4:07 - Measuring for the v-nose subfloor
5:11 - Drilling in subfloor
5:31 - Electrical explanation
6:35 - Double furring strips
7:41 - Cutting furring strips
9:10 - Measuring for MaxxAir Fan
9:41 - Building frame for the fan
11:12 - Tracing frame to cut insulation
11:52 - Drilling pilot holes for fan
12:20 - Measuring on roof
14:16 - First cut for the fan
15:40 - Dry fitting fan
17:11 - Installing the fan frame
18:21 - Butyl tape on the fan (Don’t forget this!)
18:58 - Drilling the fan into place
20:25 - Lap sealant for fan
21:15 - Testing the fan
22:12 - Make shift ceiling stud
22:41 - Ryobi time
25:13 - Cutting our ceiling material
26:33 - Installing our ceiling material
29:03 - Shout out to our friend Nick and the universe
31:34 - Finishing ceiling installation
34:24 - Last pieces of ceiling installed
34:54 - Outro
------------------------------------------------------------------------
Items used in this episode
Underlayment (ceiling and walling material)
www.homedepot.com/p/Tri-PLY-U...
Ryobi Oscilating Tool
www.homedepot.com/p/RYOBI-ONE...
Diablo Hole Saw (2 1/4 inch)
www.homedepot.com/p/DIABLO-2-...
MaxxAir MaxxFan
www.etrailer.com/RV-Vents-and...
Негізгі бет Cargo Trailer Conversion Build Episode #2 - Subflooring, MaxxAir Fan Installation, Ceiling Install
Пікірлер: 86