Everybody knows how to plug in connectors and stick things to windows. Nobody knows how to connect the red wire to the reverse light which is different in every car. They make i t sound simple but offer no videos or examples of this step.
@CarPlayBox
15 күн бұрын
You can get detailed support on camera installation by reaching our technical team at contact@carplaybox.co. Our customers' satisfaction is our priority and we try our best to ensure it. Thank you for your understanding.
@alg7253
Ай бұрын
In this setup, the "backup" camera is always on whether the car is in park, drive or reverse. No difference than a rear dash cam camera and no guide lines showing up to help you when backing up to park. If you want it to kick in only when backing up and include guide lines, you have to install it around the trunk area so you can attached the red backup wire to your backup light's wire. You can also leave it there inside the rear wind shield but you will have to figure out which is the backup wire to connect it to and possibly extend the wire to reach it.
@CarPlayBox
Ай бұрын
Thanks for your feedback! If you need further assistance, visit carplaybox.co. Thanks again!
@AntonioOwens-t6z
Ай бұрын
Back up camera needs to be hooked up to your reverse light. You have to drill a hole in your trunk to feed the camera to your trunk and to your CarPlay device.
@CarPlayBox
Ай бұрын
I understand that drilling a hole can be a bit of a concern. However, you can mount your reverse camera without drilling a hole using a strong adhesive. For more information visit carplaybox.co
@tracyr433
10 ай бұрын
How does the camera detected when the car is in reverse?
@GIOGPSY420
6 ай бұрын
In order to get that you need to move the camera to the rear of the car where boot is and connect it to the reverse light i believe so it nows whenever you pur reverse hope that’s helps
@amirulaman8347
4 ай бұрын
The red wire connect to reverse light?
@phillipplemons7245
4 ай бұрын
@@amirulaman8347yes
@DavidVerified
3 ай бұрын
Hey, simple: The Radio only shows the camera feed when the camera gets powered. Connect the camera power to reverse lights. Therefor, you see the camera when you gut the reverse gear
@corysloan8732
7 ай бұрын
I installed the camera, but when in reverse, it only shows the CarPlay box camera not the backup camera
@evanpasternak9593
2 ай бұрын
You have to splice it into your rear taillight. The wire that controls your back up light specifically. Once you splice that wire into the taillight the camera will come on each time you put the vehicle in reverse
@TheFozi76
2 ай бұрын
@evanpasternak9593 thank you. That's the missing piece
@phurballl
Ай бұрын
I installed the CarPlayBox, hooked it, and when I put the car in reverse, only the park lines appear on the screen. So, CarPlayBox is getting feed from the rear camera, but no picture. What do I do? Faulty Camera?
@CarPlayBox
Ай бұрын
It sounds like there may be a problem with the camera or its connection. First, make sure that all cables are securely connected and the camera itself is positioned correctly. I recommend contacting our support team at contact@carplaybox.co so we can help you troubleshoot. They will get back to you within 24 hours.
@moiseshernandez4307
3 ай бұрын
Neat video but in the instructions says the camera goes on the license plates area, requires a drill as well it says.
@moiseshernandez4307
3 ай бұрын
Also the reason for this is you need to splice the red wire into the reverse positive wire for full function of the reverse light, without that it won't work properly.
@CarPlayBox
Ай бұрын
Thanks for pointing that out! I understand the installation process can be a bit daunting. The camera placement and drilling instructions are intended to ensure the best performance and fit. If you have any questions or need further assistance with installation, please don’t hesitate to reach out to us at contact@carplaybox.co or check out the detailed guides on our website at carplaybox.co. We're here to help!
@prbrownowl
5 ай бұрын
I thought this was really cool but after thinking about it how the hell are you supposed to connect the reversing wires from way up on the inside of the rear view window 😮
@satish.chohan
6 күн бұрын
Hi, are the guidelines options for reverse cameras only as good as the camera they come with or is it possible to install better apps to use with the camera in android? I would like an app that has better adjustment for the red danger line and curves when parking into a car park parking bay at an angle. Thanks!
@CarPlayBox
3 күн бұрын
@@satish.chohan It is not possible to install alternative apps to adjust features such as guidance sensitivity or dynamic parking lines in CarPlayBox. For more details, please visit carplaybox.co .
@BandE-wn4qc
2 ай бұрын
why did you not show how to splice the cord to make the camera work?
@CarPlayBox
Ай бұрын
Sorry for the inconvenience. Detailed guidance videos on connecting cables will be uploaded soon to provide comprehensive instructions.
@franciscoleon4785
11 ай бұрын
@carplaybox I installed everything but the reverse back up camera doesn't work My screen is blue when I put my car in reverse
@CarPlayBox
Ай бұрын
Sorry to hear you're having issues with your backup camera. A blue screen usually indicates a problem with the camera connection or wiring. Please double-check the connections and make sure the cables are securely connected. Feel free to contact our customer support team at contact@carplaybox.co for a step-by-step troubleshooting guide. We're here to help you get everything working smoothly!
@VictoriaMoses-j1x
2 ай бұрын
It is request a TF card to how do you put one in ?
@RVNT9OE
2 ай бұрын
My car already has a backup camera. I guess I'll just install the rear one to record.
@Evan._.388
2 ай бұрын
How does the wire connect?
@CarPlayBox
Ай бұрын
Our rear camera is designed to connect to your device with one end, and the other end is connected to the reverse light. This setup allows the camera to activate automatically when you engage the reverse gear, providing you with a seamless and convenient experience. For more detailed information please feel free to visit carplaybox.co.
@walaichanokdiamond6895
Ай бұрын
I get it yesterday but I can’t plug it in my backup camera, I can’t find your good video to install . I feel disappointed and regret the money wasted.
@walaichanokdiamond6895
Ай бұрын
I can do it, yup it works great 😊 I’m so happy. I have to apologize about that because I dropped Plug for connecting the rear camera to the monitor. I’m stupid lol. I will review 5 star for you.
@CarPlayBox
Ай бұрын
@@walaichanokdiamond6895 No worries at all! We're thrilled to hear that it's working great for you and that you're happy with your CarplayBox experience. Thank you so much for your kind words and your 5-star review-it really means a lot to us! If you have any more questions or need further assistance in the future, feel free to reach out at contact@carplaybox.co. Enjoy your enhanced driving experience!
@ChristianZaragoza33
3 ай бұрын
Should of been wireless
@CarPlayBox
Ай бұрын
I understand your frustration. While our current setup involves wired connections for reliability and performance, we appreciate your feedback on wireless options. We're always looking for ways to improve our products, and your input helps us in that process. If you have any other questions or need further assistance, please visit carplaybox.co for more information. Thank you for sharing your thoughts!
@MSCGERECO
29 күн бұрын
Garbage; how to hook up with reverse gear R so reverse camera should on???
@CarPlayBox
27 күн бұрын
To connect the backup camera so that it automatically turns on when you put it in reverse (gear "R"), follow these steps: 1. Locate the backup light cable: Locate the backup light cable at the rear of your car. This cable powers the backup lights when you put it in reverse. 2. Connect the camera's power cable: Connect the backup camera's power cable to the backup light cable. This will ensure that the camera only receives power and turns on automatically when the vehicle is in reverse. 3. Run the video cable: Run the video cable from the camera to the CarPlayBox screen. This usually involves running the cable through the interior of the vehicle or under the trim panels. 4. Connect the video cable: Plug the video cable into the designated port on the CarPlayBox. Make sure it is securely connected. 5. Test the installation: Once everything is connected, put your car in reverse to ensure that the camera automatically turns on and displays on the CarPlayBox screen. These steps should ensure that your backup camera works with the gear "R" function. Feel free to reach out to us at contact@carplaybox.co for further assistance!
@mrmoo2330
3 ай бұрын
Joke😂
@gurlfiend76
5 ай бұрын
This is fine if you want to do regular back of your car camera, which I have, but how specifically do you hook it up so it automatically kicks in when you put it in reverse?
@Mastroz1
3 ай бұрын
You hook it up to reverse brake light.
@customfabrications
23 күн бұрын
Is there a way to flip the camera image? In reverse, the video shows, but it’s not a mirror image, so using it to revers is backwards. Thanks.
@CarPlayBox
21 күн бұрын
If you are talking about flipping the camera image, unfortunately there is no way to do this. For more information, you can contact our technical team at contact@carplaybox.co.
@customfabrications
21 күн бұрын
@@CarPlayBox I actually emailed them yesterday, and you can flip it by turning mirror mode to ‘off’.
@DerekGritton-c7i
2 ай бұрын
Lol....very detailed tutorial 😂.
@tracyr433
10 ай бұрын
How is the camera powered? What triggers the camera to play.?
@jeffreybarnes9088
2 ай бұрын
The cigarette lighter
@TheFozi76
2 ай бұрын
@jeffreybarnes9088 no it's powered by the rear reverse light
@CarPlayBox
Ай бұрын
Our rear camera is designed to connect to your device with one end, and the other end is connected to the reverse light. This setup allows the camera to activate automatically when you engage the reverse gear, providing you with a seamless and convenient experience. For more detailed information please feel free to visit carplaybox.co.
Пікірлер: 48