Magnets hide the sins😂😂 That they do. Good idea with the tac for weights. Never thought of that. Great video Harry. Congrats on the new wheels🎉
@Scale_Slotcars_Latvia
Ай бұрын
Hi Joe 👋 yes we used to use tac for weight 40 years ago . This car needed serious tyre tuning but it was still fun (with the magnet )🫢
@66Slotter
Ай бұрын
G'day Harry, good to see you catering for all, beginners is what the hobby needs more of cheers
@Scale_Slotcars_Latvia
Ай бұрын
Hi .appreciate you watching and commenting 👍 These will be a great budget car .I'm hoping that might attract some potential racers . I won't go any smaller than this ...I couldn't see Ho cars 😅
@66Slotter
Ай бұрын
@@Scale_Slotcars_Latvia me neither
@AnthonyBatemanSr
Ай бұрын
You’re welcome Harry🎉
@Scale_Slotcars_Latvia
Ай бұрын
Thanks Anthony 🤗
@ted.slotcardaddy
Ай бұрын
Crocodile Dundee😂😂😂, great stuff Harry 🎉🎉🎉
@Scale_Slotcars_Latvia
Ай бұрын
😂🤣thanks Ted 👍 "that's not a knife "🤭🤣
@AudiSlotGarageRaceway
Ай бұрын
they make the track look ginormous lol. good little review of them good cars Harry
@Scale_Slotcars_Latvia
Ай бұрын
Thanks Daniel, yes but I really enjoyed and I didn't expect to 🤔😁 so I've a few more on the way 🤗
@user-hh9xh1jx3v
Ай бұрын
Hi Harry, I love the garage track, mate . Didn't know you kept the house track. Soon, you will have more tracks than That slot car guy😂 .mate loving the content great stuff. 👍 PS, love the hat 👒
@Scale_Slotcars_Latvia
Ай бұрын
Hi David..nobody could have more tracks than Travis 😅 thanks about the content mate ,I'm trying to mix it up much as possible 🤗
@AnthonyBatemanSr
Ай бұрын
Thank you Harry “ I appreciate it Bro!
@AnthonyBatemanSr
Ай бұрын
You’re welcome, Harry. I hope you get some done pretty soon. I bought some Track yesterday and that stuff yesterday. It’s so expensive and I’ve been visiting with relatives so I haven’t been down there. Man cave.
@Scale_Slotcars_Latvia
Ай бұрын
Yes it can get expensive with buying the different curves and extra straights and borders(shoulders)are a big additional item to . Have fun with relatives 🤗
@SewfastSpeedway
Ай бұрын
This past week I’ve bought two 1:43 GO sets(used) and had one donated to me. Like you I intend to run them on my regular Carrera track. But for fun I setup the Go track only to try the loop. The magnetic down force plays a big part in being able to get around the loop. Will be passing on the track to someone else but I now have eight Go cars for having fun with. Your track looks fantastic and I think that your neighbour’s should be flocking over to race in the Latvian Super Speedway 🏆
@Scale_Slotcars_Latvia
Ай бұрын
It would be amazing if I could find some racers 😊 im surprised how well it ran and I will definitely get a few more 143 cars .thanks for watching mate 🤗
@Nodramaslots
Ай бұрын
I was just wondering this the other day. So glad you made this video.
@Scale_Slotcars_Latvia
Ай бұрын
That's cool that you were thinking about them ,I have ordered some more in 143 scale to do a comparison with the Carrera go cars .Thanks for watching 🤗
@shermaddictedtorc8540
Ай бұрын
thanks Harry will be ordering some 143 cars
@Scale_Slotcars_Latvia
Ай бұрын
That's great 👍Ii hope you enjoy them, I'll be reviewing the SCX 143 cars too in the future. They get good reports 😊
@droneon29
Ай бұрын
Evening Harry, thats a nippy little car, and I get what you mean about how cars like that are perfect for us learners, I remember flying off at every corner back in my youth, looks like loads of fun ......colin 😀
@Scale_Slotcars_Latvia
Ай бұрын
Thanks Colin.yes I think this style will be perfect for beginners and well within budget too .I had four beginners racing last week and they did surprisingly well with the bigger 132 cars. Thanks for watching and commenting mate 👍
@AnthonyBatemanSr
Ай бұрын
So maybe tonight, Harry I can get something done or show what I purchase. Have a great night bro looking forward to your new stuff you put on your channel.
@Scale_Slotcars_Latvia
Ай бұрын
Always enjoy seeing what you are up too Anthony 😊
@milohajek
Ай бұрын
Hello Harry, great shirt 👍
@Scale_Slotcars_Latvia
Ай бұрын
Thank you ...anything to promote the idea around my local area is a plus I hope 🤗
@CK4RC
Ай бұрын
Cool car and good run!
@Scale_Slotcars_Latvia
Ай бұрын
Thank you ...they are quite good for small models 👌
@markphillips5368
Ай бұрын
Remove the magnet and replace with a small amount of lead weight. This will help with the sticking issue and the car will slide out around the curves.
@Scale_Slotcars_Latvia
Ай бұрын
Hi 🤗I might play around with it a bit more later Mark . These will be for beginners so I'm keeping them as simple to race as possible 😁
@AnthonyBatemanSr
Ай бұрын
You have a nice section of car, bro. I don’t know if I’ll get any career go it’s nice to see you. Enjoy them.👍🏽👍🏽
@Scale_Slotcars_Latvia
Ай бұрын
Thanks, Anthony. They suit as budget racers, so in my area ,that could be a big plus, hopefully . Stay safe Anthony 😊
@slotvalleyracing
Ай бұрын
Sand the bump on the car is a good idea!
@Scale_Slotcars_Latvia
Ай бұрын
Hi Dan 👋 yes it certainly helped a lot and I'm really pleased with how it ran ...ile be getting a few more plus some SCX compact 143 😁
@SwiftSlots
Ай бұрын
Try the SCX 1:43, they have a proper guide 🙂
@Scale_Slotcars_Latvia
Ай бұрын
Hi Rob 😊I have already ordered some Scx compact cars . I have already noticed that they get good reviews for build quality 🤗
@BSslotcars
Ай бұрын
Thanks for the shout out! The 1/43 is a nice size slot car. what voltage you running 14.8? The 1/43 work so well and grip to our policar track surface so good we run 16.1v and probably can go even higher. The cars don't bottom out on our track we actually true all there tires also but I did notice some of those DTM cars like you have the magnet is real close other ones are not that low in the car. They do run much better with just a little tire truing just to get some of the out of roundness off you don't need to go crazy making sure all the rubber hits perfectly to the track and hey work much better. Your going to like the F1 cars those are really nice! Happy slotting!
@Scale_Slotcars_Latvia
Ай бұрын
Cheers Steve ,I have a couple of F1s on the way . Yes that car had almost zero ground clearance. But it was fixable....those tryes definitely need trueing . Some day ile maybe buy a machine for doing it .at the moment I just use some wet n dry paper .appreciate you commenting mate 🤗
@_Dave_S
Ай бұрын
Great vid Harry! I've got several of the GO cars. I tried one without the magnet, but it was terrible, even on my Policar track, so I just leave the magnets in these lol. I wish someone made aftermarket tires to try for these, then they might do okay without the magnet and weight added. But these are just cheap little cars, so they are fine the way they are to me, still very fun. Cheers!
@Scale_Slotcars_Latvia
29 күн бұрын
I agree totally Dave ...I will leave the magnets in and just enjoy them as they are 🤗 but they are fun little cars 👍
@AnthonyBatemanSr
Ай бұрын
😅
@Nodramaslots
Ай бұрын
I’m looking to get some 1/43 rally cars. With magnets 🤣
@Scale_Slotcars_Latvia
Ай бұрын
Take the plunge mate .you will like them 😊
@OKSlotCarTesting
Ай бұрын
Interesting video! As you know we have fun racing Carrera Go 1/43 slot cars on our 1/24 scale Carrera track like yours. I do have one F1 Carrera Go 1/43 scale Slot Car the number 5 red F1 RayBan Shell that has substantially smaller diameter tires than the other Carrera Go 1/43 scale Slot Car the number 14 BWT blue and pink F1 car. The red #5 does hang occasionally and my friends convinced me the tire diameter is what the problem is as there is no visible rubbing in that area you filed down on your Audi. The BWT F1 is a brilliant runner with no problems. But neither match the generic Ali Express F1 that is my fastest car ever that cost less than 10.00usa delivered. It was also pointed out to me that the high torque motors in these Carrera Go cars need the magnets. So if you want to run that Audi with no magnets then get a lower torque motor for it now that you shaved that underside down a bit no larger diameter tires should be needed. Yes 4 F1s would be something to behold! Glad you are getting into the 1/43 scale and you might be surprised with the HO slot cars as we are as they work great on the same track!🏁
@Scale_Slotcars_Latvia
Ай бұрын
I really enjoyed the 143, and after shaving that bit from the magnet mount, it runs great with no more sticking . I have ordered 2 F1 cars ,one from Carrera and one from SCX ,they should be here next week so I'm interested to see how they run before committing to which brand I prefer 🤗 1/43 will definitely have a place in the collection but I won't get any Ho scale as I was never a fan . But I'm happy I now have 3 different scales that can be run on the track 🙂Appreciate you watching and commenting mate 🤗
@SlotCarMisfitsofallscales
26 күн бұрын
You can shave the pin just a tab with a dremmal
@Scale_Slotcars_Latvia
26 күн бұрын
@@SlotCarMisfitsofallscales yes that's true 👍 thank you for watching and commenting 🤗
Пікірлер: 49