Thank you for the video. I was forgetting to paste image, which was only cutting the whole shape out instead of the 3d image on simulation preview. Example, instead of cutting out a 3d half sphere it would cut out a cylinder of the Sphere diameter and height.
@gizmobowen
2 жыл бұрын
Thanks for another fine video Roger. I tried adding a silk pattern in the flat area where the dragon is and the model looked nice. I also use a 1/4 inch round nose bit for the roughing pass because I think it gets into the details a little bit deeper.
@customwalldisplay
2 жыл бұрын
Great info, going to do my first 3D this weekend. Keep up the great work your easy to follow.
@rogerwebb9600
2 жыл бұрын
Awesome! Thank you!
@kapilpatil8404
3 ай бұрын
I'm from India
@sewaerla
9 ай бұрын
The converted gcode is far far smaller than the created reliev in careco maker. Any idea why?
@thisoldman7142
Жыл бұрын
Hi. I’m a noobie in CNC. Finally got my DYI machine running. First cut was my name. I know, very simple but after 5 months of building I was doing a happy dance. I’ve been slowly learning Carveco Maker for a couple of weeks and have a basic question. How do you get all of the 3D clip art all on one page. Mine will only show one category at a time. I can open the animals, scroll them, than I have to go up and open dishes and scroll through them… how are you able to open all of them and get them on one page?
@proteo-x4u
2 жыл бұрын
Hi Roger, I have a question for you: I have carveco maker+ and what I want to do is to take a 3D model from the library and export it in stl.
@markriggs5480
2 жыл бұрын
Just exploring my options with the CNC machines and software available. You have a easy to follow step by step process using Carveco Maker that makes sense to me. I am sold on Carveco software and now looking at the CNC machines. Do you have an option on make/model with a budget of $2500?
@Chaosweaver-1
Жыл бұрын
Longmill from Sienci Labs
@kapilpatil8404
3 ай бұрын
Hi
@joseguevara184
11 ай бұрын
Is it a simplified version of ArtCAM? ARTCam EOL becomes free to use?
@rogerwebb9600
11 ай бұрын
Carveco is the new name of ArtCAM
@coberg091
Жыл бұрын
I was wondering if you could help me, if I send you my logo I think it is . JPG, could you make a video of how to convert it to 3d carve co for gcode. I would pay you for this if it’s not too expensive.
@coberg091
2 жыл бұрын
Hello Roger, I am probably the biggest fan, took me almost 2 years to build my CNC. It is ready to go. I have been watching your videos on how to make reliefs,program told paths and much more. You are doing a outstanding job to help others who are upcoming and newbies. My hat is off to you. I just finished programming a dragon with a frame around it similar to yours and carveco maker. I finally got the program files to complete without error after calculation. When I went to go select G code. MmTxt it’s stated I do not have a tool changer because I’ve used two different tools 2mm tapered & 12 roughing endmill. Is there anyway around this or do I have to use a different format to save it.
@rogerwebb9600
2 жыл бұрын
Calculate the tool paths separately
@AllAroundTube50
Жыл бұрын
Would be cool if you ended the video with the actual end result.
@rogerwebb9600
11 ай бұрын
I do many 3D carvings on my channel
@selcouthconcepts
2 жыл бұрын
This helped me understand Carveco a little better. Thank you kindly, Roger.
Пікірлер: 22