I tried to update a CAS3++ Istapi system and the car was basically like in the video can this be done with a IM608?
@EAATAUS
2 жыл бұрын
Hi sir, yes you can if you still have comunication with the module! Thanks
@carlosandrade-cd3ni
Жыл бұрын
Can this same procedure be used on a CAS 4? Amazing video.
@misamix
2 жыл бұрын
Do you need put some virgin dump in cas before programming? Because programmimg fail with my im608
@EAATAUS
2 жыл бұрын
Hi sir, if it fail try to take a look if you have comunication with the module first!
@demrtriusmarkes498
Жыл бұрын
I have a problem with a 2013 bmw x5 35d no crank no start and cas error
@fabinhomaurinho1461
3 жыл бұрын
Recovery after bad key programming and the eeprom got corrupted?
@EAATAUS
2 жыл бұрын
Hi sir, you need to check if you still got comunication with the MODULE, if yes, you can program it by OBD.
@renaudjerome8416
3 жыл бұрын
Nice job
@EAATAUS
2 жыл бұрын
Thanks sir, we really appreciate!
@sergey_sovetsky
4 жыл бұрын
Will iM508 do the same?
@richardpanama1
2 жыл бұрын
Can the IM608 also do a 2011 Mini CAS recovery like you just did with the 908S or the IM508 for that matter?
@ReginalBronson
2 жыл бұрын
Yes. Both IM608 and IM508 can do this.
@scooter1391
2 жыл бұрын
Hi Kyle can this work on a mini cooper r56 with no working key and could this program a key for me
@scooter1391
2 жыл бұрын
forgot to asked is this 908s the only one can do this this easy
@EAATAUS
2 жыл бұрын
Hi sir, you do do this job with the IM608 and you if you need to do all key lost situation you can do it as well.
@aplusautomotive
Жыл бұрын
My ignition won’t turn on, it’ll do the whole thing except the end
@viridian6903
2 жыл бұрын
What does it mean update integration level in cas does it mean UIF data update or anything else?
@autochaveiro
Жыл бұрын
HI , I can do this with im508?
@genek3961
Жыл бұрын
The 04 BMW 530I has similar problem with nothing on dash when key in ignition and trying to start. From CAS its saying no key is in the ignition even though key is in there. I did the CAS procedure you had but keep getting message Download calibration failed and I'm connected to internet and battery voltage was at like 12.3 volts. Any suggestions???
@mr2law
Жыл бұрын
is your subscription still valet?
@genek3961
Жыл бұрын
@@mr2law Subscription valet?
@mr2law
Жыл бұрын
@@genek3961 sorry I meant is the tools subscription still active?
@genek3961
Жыл бұрын
Yea I renewed my subscription to Autel software and BMW software was free after doing it.
@mr2law
Жыл бұрын
@@genek3961 One time I had that problem . Try hardwire connect the autel to the router instead of wifi. Good luck.
@penso1980
4 жыл бұрын
Excelente. Lo único malo es que es en ingles 🙄
@EAATAUS
4 жыл бұрын
Hola, tenemos un canal en español. kzitem.info
@julianaroman1041
3 жыл бұрын
@@EAATAUS la paguina no está disponible en español
Пікірлер: 30