Another cat 906 loader video. Have been using the loader a fair amount this summer. It has around 30 hours on it and is running like it should. Thanks for watching.
Cat was so stingy with gauges back in the days of the 3034. My skid loader has the same engine. I plumbed a temp sender in the port directly below where the factory one went by the thermostat. And then ran an oil pressure gauge by doing a Tee where the factory sender is. My engine never goes above 190 when running hard. And even with 6500hrs on the clock she still has over 40lbs of oil pressure at hot idle and around 60 under load. Last thing I want to do is a tach. I’m thinking the tiny tach that clamps on the line for injector 1. Or maybe one that wires to the alternator.
@quarter_circle_f_ranch
6 ай бұрын
My hour meter showed 9000 hrs when the rod decided to try and exit the block. However the meter was no longer counting so I am not sure of the exact hours. It also had a tough life being used in the demolition business with operators that respect a machine. The new fractured style rods should be stronger and last the life of the loader. Thanks for watching and info.
Пікірлер: 2