Causes and how to fix a dead Suzuki Satria Fu right and left turn signal. The first step we have to do is: 1. check the 12 volt battery output cable after the ignition is turned on, usually the orange cable and make sure it reaches the place where the penny is. 2. check the output from the pleser sen with a light blue cable and the light should flash and go straight to the center switch in front. and if it doesn't flash then the pleser is damaged. 3. check the output cable from the left cent switch with plain black color, make sure the battery shock is there after the cent switch is pressed to the left, and the black cable is connected to the rear turn signal. or motor frame. 4. check the light green cable, make sure it has to discharge the 12 volt battery after the ignition is turned on, and the cable is connected to the right rear centrifuge, and the right cent switch is pressed to the right. And for the black wire the white line is on the right where the turn signal is as a mass or ground, make sure it is attached to the body or motor frame. Thank you very much to all #SUBSCRIBER#and viewers, hopefully the knowledge is useful. please # SUBSCRIBE AND LIKE # #SIDIK NURYADEN CHANNEL# If you have questions, you can write them in the comments. Tel/WA: 085863491419. Thank you very much.
- 3 жыл бұрын
Causes And How To Fix The Right Left Sen Lights Suzuki Satria FU That Are Dead.
- Рет қаралды 67,564
Пікірлер: 197