Testing out the MCK Gen 2 with a buddy at the range. Good times had by all. If you have questions or comments let me know. Shot on a Canon 80D. Music made with Garage band.
Love the video, just picked one up myself. Keep the content coming Wes.
@wcp0505
4 жыл бұрын
Thanks! Will do! Hope you enjoy your MCK. I love mine for sure.
@ACE_VIPER
3 жыл бұрын
how was the shipping time?
@dj3d007
3 жыл бұрын
@@ACE_VIPER it came in a couple of days. I thought it was super quick.
@ACE_VIPER
3 жыл бұрын
@@dj3d007 Cool thanks! Have u had any reliability issues? I just ordered mine.
@dj3d007
3 жыл бұрын
@@ACE_VIPER zero issues you are going to love it. I have a G17 in mine no problems at all
@BlazeOfGlory742
Жыл бұрын
Great video man. Salute from Philadelphia
@wcp0505
Жыл бұрын
Glad you enjoyed it Bro!
@TheRollingGrill
4 жыл бұрын
Awesome Video. I just ordered mine and can't wait to shot it.
@wcp0505
4 жыл бұрын
The Rolling Grill Thanks!
@grinningDEATH76
2 жыл бұрын
Great video. Just got one that fits my glock 26 and 27. Ready to take it to the range
@wcp0505
2 жыл бұрын
Thanks! Hope you enjoy it Jeremy!
@StumpkillerCP
10 ай бұрын
Being a peasant in the serfdom of New York we are limited to 10 round magazines. The downside is that is foolish. The upside is the magazines are ultra-reliable and compact. I recommend Renaissance Wax on the slide and sights for a pistol in an MCK. The fouling wipes right off with a dry cloth.
@brant8822
4 жыл бұрын
just ordered mine, cant wait to click my G19 into it and blow thru some rounds!
@wcp0505
4 жыл бұрын
It’s awesome. Hope you enjoy
@dean_carries5940
3 жыл бұрын
You should bring the sight up to your eye level. You should have to slouch over and bring your head down.
@impeccablealpha7373
4 жыл бұрын
That thing is slick!
@stephenhernandez4403
4 жыл бұрын
Great video Wes, to the point....from California......
@wcp0505
4 жыл бұрын
Thanks Stephen! Glad you liked it.
@kickadams8908ass
2 жыл бұрын
Or if you have a Gun in the safe that you don't carry and if they make an MCK if it, get the MCK for that Gun.. in my case M&P Shield 1.0 I carry the 2.0 and it will not be going in the MCK
@wcp0505
2 жыл бұрын
Solid advise!
@lowkd5465
3 жыл бұрын
Make a video on sighting in the red dot so i could do mine
@Grouse2275
4 жыл бұрын
I just got one and have enjoyed shooting it. Just a couple of observations........ I tried using my Glock 23 with a LWD 9mm conversion barrel. With this, the ejection is quite soft and I found ejection to be problematic. The rounds didn’t always clear the gun and some brass got caught in the frame behind the pistol. I also had two stovepipe malfunctions and one double feed. Clearing malfunctions is more difficult with this setup so just be aware. With .40 caliber rounds, it ran fine though the weapons light came off twice. I’d imagine it would run fine with a Glock 19 though. It is very accurate and I’d recommend the thumb rest on the left side...... it helps and keeps your hand from creeping towards the muzzle. I wouldn’t recommend the brass catcher since it’s not easily removable.
@wcp0505
4 жыл бұрын
Awesome info Craig. Thanks for that! That is strange your having so many issues with your G23 in there. Surely you can’t really limp wrist this in the MCK. But I still wonder why your having issues? Have you tried different ammo? I had major issues with the Self defense ammo awhile back. It just wouldn’t feed in the G 19 correctly.
@rickj2877
4 жыл бұрын
I’m using the G19 gen 3 in mine and for some reason mine kept stove piping as well as jamming every other round on target ammo. Not sure why. I love the MCK I’ve just got to find out why it was doing it.
@RCs_world
4 жыл бұрын
I like that! Thanks for the video:) Just wonder that what’s the length of “GEN2 EXTENDED STABILIZER BRACE” I just got gen1 and it feels like little short then what I thought. I heard that gen2 has longer brace then original, but website didn’t say anything.
@wcp0505
4 жыл бұрын
This is what I have for measurements R C. Length folded is 15 inches, Height optic flush magazine 8 1/2 inches. 30 round mag inserted 13 inches. With about 4 1/2 inches. Stock unfolded 23 inches. The 50 round drum is 4 3/4 of an inch wide. Let me know if you need more info. Take care!
@RCs_world
4 жыл бұрын
Wes Pope very good thanks! It sounds like it’s almost 2 inches longer then the gen 1!
@bird289
3 жыл бұрын
I heard a rumor that the gen 2 brace fits the gen 1, looking into this for myself as well
@RCs_world
3 жыл бұрын
Gilbert Rentas yes fits but I will waiting till the price drops
@wcp0505
3 жыл бұрын
@@bird289 I think that is true actually.
@justinsherrod322
3 жыл бұрын
When placing your scope on the MCK. What is the best placement on it so your scope is not to close or not too far away from you. Also once you cleaned your Glock was you able to clean all of the residue of including on the sight.
@wcp0505
3 жыл бұрын
Justin Sherrod well if it’s a red dot then most red dots have infinite eye-relief (the distance from the sight to the shooter's eye), you can mount them further towards the muzzle or back towards your eye, and they'll work just fine. It’s up-to you. If it’s an actual scope you’ll need to have it so that your eye can see the entire site reticle but not too close to your face.
@rickj2877
4 жыл бұрын
What grain was you using. I’ve got one and and have the G19 gen3 and every other round was jamming up. I was shooting Precision Delta 115 just through my original Glock mag. Then put in my Federal personal defense 147 grain I believe and no issues what so ever. I’ve reached out to CAA about it but haven’t heard back from them yet. Thanks man
@wcp0505
4 жыл бұрын
Hey Rick. I was shooting a mix of Wolf steel casing 115 grain and Federal, 115 grain. Really just cheap target ammo. Only ammo I’ve had issue with is Hornsby critical defense, that stuff won’t feed in my G19 at all.
@rickj2877
4 жыл бұрын
Wes, yeah I’m not so sure why mine kept doing that.
@Soravia
3 жыл бұрын
Take off the front shroud, throw in 6" or 9" Lone Wolf barrel. Longer range, more power, no mess on the front.
@wcp0505
3 жыл бұрын
That actually sounds awesome. How much do they run? Where can I find one?
@Soravia
3 жыл бұрын
@@wcp0505 Lone Wolf barrels are sold everywhere as well as their own site. They offer tighter chamber for better reloading, no "Glock Bulge", and traditional rifling for lead and polymer coated bullets. Hickok45 has video on 9" glock barrel vs stock 4.6" on 10mm
@wcp0505
3 жыл бұрын
Soravia I will check that out! Thanks!
@JAlex-ng1mu
3 жыл бұрын
Did it mess up your front sight? I have the same Tru Glo sights and that looked almost cooked!
@wcp0505
3 жыл бұрын
The front sight was completely covered with residue but it was easy to clean with some standard gun Remington gun cleaner, brush and rag. It works fine now.
@samruez5108
4 жыл бұрын
Wolf ammo sucks!! yes, it goes bang but it leaves a mess behind in and on your weapon.
@wcp0505
4 жыл бұрын
Very true!
@raincaller4927
4 жыл бұрын
How many rds to get it that dirty? Was it hard to clean? Thanks
@wcp0505
4 жыл бұрын
I ran through about 250 rounds that day. It was Wolf ammo, with steel casings. From my experience it’s pretty dirty ammo to start with. Cleaning wasn’t too bad. Just used some rem oil a rag and toothbrush and it looks good as new.
@wcp0505
4 жыл бұрын
Jeff Slagle #truth
@bird289
3 жыл бұрын
I miss range day 😪 ammo is just too scarce and expensive right now
@wcp0505
3 жыл бұрын
Me too.... me too
@RCs_world
3 жыл бұрын
Me too too expensive
@mohamedsiddiqui393
4 жыл бұрын
love the content brotha
@wcp0505
4 жыл бұрын
Thanks Bro!!!
@uno4606
2 жыл бұрын
Would the charging handle wear out with time if you leave your pistol in it.
@wcp0505
2 жыл бұрын
Hey Julio, I don’t think it would. It’s a pretty tight fit and the groves line up for the glock pretty tight. But that being said it’s only plastic. I don’t leave mine in the MCK.
@WhoDeanyUnchained
4 жыл бұрын
Great video
@wcp0505
4 жыл бұрын
Thank you!
@jasondavid1330
4 жыл бұрын
Will not work with Gen 2. Only gen 3,4,5
@MRRAGPICKER
4 жыл бұрын
Gen 2 glocks won't work. They don't have the rail under the barrel
@wcp0505
4 жыл бұрын
True. It has to have a rail below.
@741walter
4 жыл бұрын
Does it retain zero once you take your glock out and put it back in, and how would you compare it to maybe a grand power stribog or cz scorpion?
@wcp0505
4 жыл бұрын
James Walter I cant say that I have had any experience with those two guns unfortunately. Looks as if the MCK would be a cheaper option that is pretty flexible due to it being a pistol first. But I would guess that those other guns would have better range over all, maybe. I have had my G19 in and out of the MCK 4 times with no issue regarding the Zero. It’s been fantastic so far. Around 1,000 rounds through it.
@wcp0505
4 жыл бұрын
James Walter sorry I can’t give you more Insight.
@741walter
4 жыл бұрын
@@wcp0505 I appreciate the feedback.
@laxkid1019
4 жыл бұрын
Nice video. Does all of that excess carbon come off with normal cleaning or do you have to do anything special? Also does the MCK leave any scratches on your slide? This thing looks like a lot of fun
@wcp0505
4 жыл бұрын
Hey Flykings5, thanks for the question. So the clean up was pretty easy. I just used Remoil spray, a rag and toothbrush for the slide serrations (gen 5 Glock). Outside cleaned up pretty easy. Just a wipe down. Internal cleaning was about the same as normal. Just had to clean the outside of the barrel a bit more than normal. So far no scratches on the slide but I’ve only ran it a few times. I’ll have to see how it looks after prolonged use. For me though, my pistol is a tool I expect it to wear over time anyway.
@mcalixtro82
4 жыл бұрын
if you're planning on doing a lot of shooting with a mck on.. its best that you coat/wipe on some lube/oil around the areas most affected by the build up... it'll be easier to clean afterwards
@derektaylor788
4 жыл бұрын
To prevent the buildup i put a glock 34 (gen 5) threaded barrel in and took the barrel cover out of the mck. No more build up problems. It will not work with the barrel cover in.
@wcp0505
4 жыл бұрын
Hey Derek, so you took out the barrel shroud in the front of the MCK? I know you have to do that if your installing a silencer. But does it affect the fit of your Glock?
@eddiecrow9133
3 жыл бұрын
Would it be wise to put a compensator on it? Would it even fit, while in the chassie
@wcp0505
3 жыл бұрын
Eddie Crow wise 🤷🏼♂️. But if you remove that front shroud like you would for a silencer compensator should fit fine.
@eddiecrow9133
3 жыл бұрын
Wes Pope thank you, i have a glock 23 and even though this chassiy provides 3 points of contact, i was considering buying a threaded just to put a comp on it to reduce the muzzle flip even more for faster follow up shots.
@wcp0505
3 жыл бұрын
Eddie Crow no problem Bro, sounds like a plan. Should shoot even better I would think.
@luismccarthy4675
3 жыл бұрын
Does it work with compensated Glocks like 17C?
@wcp0505
3 жыл бұрын
Good question. I’m not 100% sure but by the design I would think not. Have to search the website for that one. Sorry.
@AI-xe5jr
3 жыл бұрын
I will never buy an MCK product ever again. They have horrible customer service and don’t care about their customers!.
@wcp0505
3 жыл бұрын
What happened? Fill us in.
@jarrentoves4375
2 жыл бұрын
How long did it take to receive it
@singeparabellum396
4 жыл бұрын
Hi, isn’t the stock too short ? Thanks for the video
@wcp0505
4 жыл бұрын
No, it’s not too short, at least not for me. You just have to adjust where you mount your sights based off of where you check rests.
@jrow96
4 жыл бұрын
3:36 wish I had a glock 18 lol, full auto
@wcp0505
4 жыл бұрын
Killin it. Took longer for someone to catch my mistake than I thought. G19 Gen 5.
@bob.bobman
3 жыл бұрын
I just got the new Glock34 model and am disappointed. The charging handle does not accommodate adjustable rear sight on the new gen5 glock34. Also there is significant play/movement when the gun is "locked" into the mck. Nothing more than an expensive range toy. I am sending mine back. Additionally been days and CAA has not responded to me. Terrible experience all around. Will let you know if they try to stick me with the 20% restocking fee too....
@wcp0505
3 жыл бұрын
Damn Bob, that just sucks man. I hope they don’t give you to much trouble returning yours. Still haven’t had any issues with mine but you know theses things happen. Good luck on the return Bro. Let us know what happens.
@reynaldorivera7641
3 жыл бұрын
You need a lot of weapons training. But that’s the fun part
@wcp0505
3 жыл бұрын
You do realize this is the first time I had taken out the MCK right. It does take some time to get comfortable, but there is a point that it becomes second nature with enough training. Anyway. Hope you liked the video. I know when I was looking for more info on the MCK at the time it was pretty limited.
@kevinpritchard7855
2 жыл бұрын
That Korean drum mag that it comes with it’s junk I cannot get mine to operate properly
@wcp0505
2 жыл бұрын
Yea it’s not worth the money. Definitely a gimmick.
@kevinpritchard7855
2 жыл бұрын
@@wcp0505 I watched this one video on KZitem about the MCK and the 50 round drum and the guy had one little problem with it and it ran fine after that he has must be some kind of special peace because mine sucks it doesn’t cycle at all it’s the worst design
@kevinpritchard7855
2 жыл бұрын
What kind of drum mags would you recommend do you have experience with Glock drum mags for 40 caliberG 23
@wcp0505
2 жыл бұрын
@@kevinpritchard7855 No unfortunately I don’t. I only have this crappy 50 round drum and three 30 round magazines. I haven’t looked into any of the other ones.
@jamesj489
3 жыл бұрын
Would a glock fit with a Tecna clip installed on it?
@wcp0505
3 жыл бұрын
I don’t think so. It’s a pretty tight fit. But I don’t have one of those clips to find out.
@jamesj489
3 жыл бұрын
Okay cool thanks
@turbyturbo1
3 жыл бұрын
does a glock 20 fit?
@wcp0505
3 жыл бұрын
Not sure exactly but the website would be able to tell you. CCA
@mccalltx
4 жыл бұрын
Great Video. I don't think those fit gen2 FYI.
@wcp0505
4 жыл бұрын
Yea just works on gen3 and up.
@mariocastaneda6041
4 жыл бұрын
Does this fit a Glock 22 ???
@wcp0505
4 жыл бұрын
Mario Castaneda yes it will
@bertt1014
3 жыл бұрын
failure to feed with a 50 rd drum mag -- not surprising
@wcp0505
3 жыл бұрын
Nope that was my least favorite part of my purchase.
@thomaskishmanii2675
4 жыл бұрын
How many rounds did you shoot?
@wcp0505
4 жыл бұрын
Around 250 of the Wolf ammo. Steel casing. The cheap stuff. But it still won’t bang!
@student71000
3 жыл бұрын
I have one for my glock 23 waiting to get a sight for it plus do i have to adjust the barrel to fit my glock 23 from 3in or 4in a specification
@wcp0505
3 жыл бұрын
Daryll I’m not sure about the firmest for the Glock 23. The CCA MCK manual should tell you which length to go with, but you can run longer barrels in the MCK. What sight did you go with?
@student71000
3 жыл бұрын
I'm waiting on the next gun show to get my sight which I have my eyes on that I want then I'll put it all together
@wcp0505
3 жыл бұрын
Nice good luck with your build Daryll.
@student71000
3 жыл бұрын
Thank you sir Pope
@gloglo1275
4 жыл бұрын
Does it work with a treaded barrel? Thanks
@wcp0505
4 жыл бұрын
Glo Glo it will take a suppressor on the Gen2. So it should be fine for a threaded barrel. Just have to removed the fro t shroud.
@gloglo1275
4 жыл бұрын
Wes Pope Sorry I meant does it work with a treaded barrel on th3 Glock. My gen 5 Glock 19 has a zev match treaded barrel. Thanks
@wcp0505
4 жыл бұрын
op1.0ps.us/pdf/opplanet-caa-mck-gen-2-owners-manual-pdf.pdf Pg.13 might help. If you remove the shroud then it might be fine.
@gloglo1275
4 жыл бұрын
Wes Pope I got the gen 4 micro roni setup. I’ll let you know when I get it if it works. Thanks
@tomhardin2761
Жыл бұрын
The drum does not work, completely failed an forst use and locked up my weapon. CAA refused to even rrespond when I wrote them, terrible company!
@jimfuhrman8665
4 жыл бұрын
First! Pew pew pew...
@bubbascoutdog
3 жыл бұрын
Failure to feed drums, mags, whatever are TRASH! Throw them away because you can’t rely on them when your life depends on it. FTF, you’re DEAD!!!
@wcp0505
3 жыл бұрын
Yep couldn’t agree more. Drum mag is just for throwing away a bunch of 💰.
@stevef1389
3 жыл бұрын
turn off the ambient music while talking
@JS-dn2mm
2 жыл бұрын
Get your finger off the damn trigger 1:37
@wcp0505
2 жыл бұрын
Man yea I guess your right. Looked like it was on there. But I’ll tell you I wasn’t pulling it. Pretty sure I was trying to press the magazine release also. All the same, safety first. Thanks buddy.
@wcp0505
2 жыл бұрын
Normally on my Glock I’m left handed. But normally I shoot my rifles right handed. Don’t ask me why. It just feels right to me. So my mag release is on the right side.
@JS-dn2mm
2 жыл бұрын
@@wcp0505 Excuses dont save lives. Your finger was on the trigger for a LONG time.
@wcp0505
2 жыл бұрын
@@JS-dn2mm Good chatting with you. Hope you enjoyed the video.
@juggernaut8647
3 жыл бұрын
Them trash drums always do that 🙄
@frankcessna7345
4 жыл бұрын
S
@ddmob268
Жыл бұрын
That drum is 💩
@wcp0505
Жыл бұрын
It really is.
@cl60cruzer
3 жыл бұрын
Worthless pistol drill
@wcp0505
3 жыл бұрын
Give me a good pistol drill. Don’t leave us hanging.
Пікірлер: 144