Let me know how your setup goes! Also, go SUBSCRIBE to my new show with David Bombal, This is IT! ----> 33-year-old 💈Barber Turned Cisco Network Engineer - CCNA | This is IT - Episode 2 kzitem.info/news/bejne/k3eH0aeibJ6ld34
@nitroboxster4267
5 жыл бұрын
@NetworkChuck Will you be making cbt nugget training videos for azure intune?
@lightspeedhorse8964
5 жыл бұрын
Thanks Chuck, quick question, if I have a recent laptop Dell xps15, do you still recommend not using it for this and using this cloud setup instead?
@johntabaron3620
5 жыл бұрын
Thanks for this tutorial Chuck! The only problem I am encountering is that everytime I go Idle on one of my router, it freeze all the time. Any thoughts on this? I am using IOS XR. That's the only working GNS3 IOS image I got. RP/0/0/CPU0:R2#show ver Fri Mar 29 03:01:21.100 UTC Cisco IOS XR Software, Version 6.0.1[Default] Copyright (c) 2016 by Cisco Systems, Inc. ROM: GRUB, Version 1.99(0), DEV RELEASE R2 uptime is 24 minutes System image file is "bootflash:disk0/xrvr-os-mbi-6.0.1/mbixrvr-rp.vm" cisco IOS XRv Series (Pentium Celeron Stepping 3) processor with 3145215K bytes of memory. Pentium Celeron Stepping 3 processor at 2371MHz, Revision 2.174 IOS XRv Chassis
@butchcassidy5398
5 жыл бұрын
I'm doing GNS3 Academy for ccent ccna both all since I started watching your videos thanks man!
@omar5695
5 жыл бұрын
Hi. After a month of evaluation this is the major issue a) It is very unstable for advanced switching like etherchannel, spanning tree, etc. b) According to the official gns3 documentation VM will be slow and may not work when using Qemu. So, no good for advanced switching features. See docs.gns3.com/1c2Iyiczy6efnv-TS_4Hc7p11gn03-ytz9ukgwFfckDk/ Omar
@seanpickard8499
3 жыл бұрын
Dude, you have the most relevant videos of any IT teacher, you nail it all the time
@residentevil1197
4 жыл бұрын
Got my CCENT yesterday, and decided to try setting this up. It finally works! After like 6 hours of troubleshooting lol (mainly because I don't know jack about linux)
@koreyd4740
5 жыл бұрын
Thanks Chuck for setting a 3 minute timer on my Alexa devices lol
@NetworkChuck
5 жыл бұрын
Haha, I set my own timer 4 times after that while editing. :)
@youropiniondoesnotmatter
3 жыл бұрын
Lol I read this comment, and kept watching the video and it just happened to me too xD
@XanderPetty
5 жыл бұрын
Holy hell. How have I not thought of this before! Genius! I'm sold.
@greenleaph5145
5 жыл бұрын
I was super pissed the fk off today, but after watching this video I felt really mellow and one with the earth. Thank you NetworkChuck. I really appreciate your content sir.
@reedlinares
4 жыл бұрын
Yes!!!. I want to know too!!
@Zachucks
5 жыл бұрын
I love the enthusiasm towards Microsoft Edge lol, I only ever use it to download other browsers.
@sifiso5055
4 жыл бұрын
Zachariah Huckstep oh c’mon😂
@maverickcruise
4 жыл бұрын
The new edge chromium is kick ass. Check it out, it gives chrome a run for its money
@bluesdog88
4 жыл бұрын
First thing i do, don't think I'll ever get the Internet Explorer taste out of my mouth lol
@saifal-badri
5 жыл бұрын
You earned a sub just by making that cup of coffee and saying gns3 :)
@Brizizaz
5 жыл бұрын
Wish i could like this 10 more times chuck. Thank you for everything you do. You’re a huge reason im chasing my IT dreams!
@omar5695
5 жыл бұрын
It worked! Beautiful!....a) I did it in one hour .....b) Make sure to use PowerShell instead of Bash.....Thank you Chuck!
@burstdarkangel
5 жыл бұрын
do you have a free account? azure deny my free trial
@omar5695
5 жыл бұрын
@@burstdarkangel . Yes I do. But I had to put my credit card information to have my free trial. And after a month of evaluation. I don't recommend it for advanced switching (Ex. vlan, stp, etc). It is very unstable.
@blackrenega999
4 жыл бұрын
Awesome ! I had a couple of issues (GNS3 server and client compatibility) but in the end, i made it ! I'm so happy that i can lab now without torturing my poor computer due to CPU/MEM overload ... and "almost" for free ! Thanks Chuck for this video !
@EricTylerHickes
5 жыл бұрын
Setup went PERFECT! Thanks Chuck!
@3399Randy
5 жыл бұрын
Thank you Network Chuck for showing such passion for IT, would love to see more azure related videos or at least one. Blessings from Chicago!
@ohhi6430
3 жыл бұрын
Dude.. I dont even drink coffee but I started to have this habit from you. Thank you for your awesome videos.
@johnchristophersen8264
Жыл бұрын
Not very many people know what a siphon pot is or how to use it - very nice to see yours!
@cabeasley1
5 жыл бұрын
thanks! I had a at least one self-induced hiccup, but your instructions are impeccable and all I needed to do was review, coffee, review
@veerukalahasti9604
5 жыл бұрын
Hi Chuck ..this is veeru and i work in cisco's WNBU, we met during WIFI 6 demo in Cisco's building 19 ..... Thanks a lot Chuck for your contribution to the people who are in the network domain like me.
@NetworkChuck
5 жыл бұрын
Hey Veeru!! Thanks for stopping by! It was great to meet you as well!
@rdscog
4 жыл бұрын
I currently have issues connecting in GNS3. GNS3 controller version 2.2.5 is not the same as compute AzureCloud version 2.1.21.
@JonathanB00K3R
4 жыл бұрын
Yeah, im not sure which is easier. Changing the one the server points to, or the one on my desktop.
@rdscog
4 жыл бұрын
@@JonathanB00K3R This issue is ongoing and I would really rather not rollback to the older version of GNS3
@chrisharper5801
4 жыл бұрын
Try upgrading your VM's Linux distro to 18.04 then from the VM re-run "curl raw.githubusercontent.com/GNS3/gns3-server/master/scripts/remote-install.sh > gns3-remote-install.sh" then "sudo bash gns3-remote-install.sh --with-iou --with-i386-repository" from what I found looks like there is an incompatibility with the python version that runs on ubuntu 16.04 with the gns3 server 2.2.xx you may even get away with updating the python version to >= 3.5.3 on 16.04 OS.
@frankiefuryland
5 жыл бұрын
First of all, thank you...! Initial Setup was spot on, Sir! Since the upload, I've been racking my brains trying to get ACS or ISE onto it to fully build a CCNP Security lab environment. No luck, but have got ISR, ASA and Switching going great! :-)
@everett5252
5 жыл бұрын
Great video! The steps were right own and this was the fastest GNS3 install I have done.
@gashone
5 жыл бұрын
Hi Keith, I'm a fan of CBTngt for a long time, and having you in their team is great. Great information in this video and I wish you best of luck as a trainer @ CBT ngt.
@bleudj
5 жыл бұрын
I wish he had done a udemy lesson instead
@vincentjanse2398
Жыл бұрын
I'm studying for CCNP without only a CompTIA A+ and everything sounds like encrypt, HASH, encrypt, HASH, poof, and now you have a secure network. My wife has a desktop with 32gb of ram but to be honest an online setup with be much better since we live in a small apartment and i want to study with my crappy laptop and keep my setup as minimal as possible. If this works, it would be a gift from the heavens!
@ItsNod
5 жыл бұрын
you sound like jeremy c ...so much energy in your presentation
@mauropedro1541
5 жыл бұрын
I thought the same thing.
@philippt.4664
4 жыл бұрын
for everyone thats getting an erorr, changing -name GNS3 to -name "GNS3" in the commands fixed it for me
@dcell972
4 жыл бұрын
that fixed my issue. now i am getting an error saying to try a different size and currently not available in location. Any tips/advice?
@gopalkrishna3416
5 жыл бұрын
I love the intro tune ... it’s amazing and learning about CCNA is awsme ... these videos keeps me motivated
@MichaelJohnson-kl7rf
4 жыл бұрын
Coffee is the most horrible tasting thing in the world, that said you're the most awesome network youtuber out there 😍
@sofianeboukhelal
5 жыл бұрын
can't wait for the Az-100 tutorials , thanks bro !
@CollabCrush
5 жыл бұрын
A very timely video! I've been thinking about this very thing all week! Thank you!
@NetworkChuck
5 жыл бұрын
Absolutely! Let me know how it goes!
@JorgeAlmazan
5 жыл бұрын
Awesome video, Chuck! Great use of the cloud!
@NetworkChuck
5 жыл бұрын
Thanks Jorge! Good to hear from you!
@mrsnelky8291
5 жыл бұрын
Chuck, your the bomb dude, you really don't know how much you inspire me.
@balla2172
5 жыл бұрын
What the hell type of coffee setup is that
@ponytrap12
5 жыл бұрын
Balla21 looks like a bong!
@MikeTrieu
5 жыл бұрын
Looks like one of those siphon or vacuum coffee brewers. His seems a little unwieldy having to lift the entire stand to completely drain the vessel, but it does look very steampunk-y, doesn't it? Needs more copper and exposed gears, obvs.
@nickbrennan3925
5 жыл бұрын
Yeah I thought he was gonna blaze up!
@NicMG
5 жыл бұрын
Pinnacle of hipsterisim
@brectangle
5 жыл бұрын
It's called a siphon coffee brewer, Hario makes one for ~$70. Not as good as other brewing devices, and you have you refill the butane torch and cleaning is annoying, but it is a lot fun to make and cool to look at.
@ICEMAN_96
5 жыл бұрын
So, how do you upload the VIRL images within the portable project to the GNS3 remote server?
@olamidearibisala
5 жыл бұрын
Now this is where I also need help
@MrLostGravity
2 жыл бұрын
Came here for the coffee crack cooking, stayed for the good networking content
@pogingbagsik8195
5 жыл бұрын
Thank you so much for introducing and giving a step by step guide on how to do this awesome tech happen! im studying for my ccna cyber ops 210-255 now and will proceed to ccna 210-260 afterwards! im sure this will help me a ton! and as you said this is a game changer! also the 59 bucks revamp from cbtnuggets is lit AF! thanks a million bro! kuddos to you!
@Arul-lb2nk
5 жыл бұрын
Are you studying Cyberops with a institute or a online program? Cause I need the syllabus can you help
@pogingbagsik8195
5 жыл бұрын
@@Arul-lb2nk nope, im self taught. just watch the cbt nuggets and read some forums online and asking some lectures from my friends that attended the cohort courses.
@jvits31
5 жыл бұрын
Keep that fire burnin' 🔥🔥
@pogingbagsik8195
5 жыл бұрын
@@jvits31 oh yes bruh! we gotta do, what we gotta do! >:)
@levycordova2816
5 жыл бұрын
Oy loko patwick, maling pornsite napuntahan mo hahaha
@chris.cantwell
4 жыл бұрын
That is some serious hipster coffee with that Mr. Wizard science lab setup.
@techieadam5031
5 жыл бұрын
Hi Guys, if you don't know how to format the text for your location, type *Get-AzureRmLocation | format-table* in the terminal. Then use the text from the Location column in the script.
@techieadam5031
5 жыл бұрын
You can also check your latency to various data centers here: www.azurespeed.com/Azure/Latency
@MarkRouleau
5 жыл бұрын
I find setting up labbing is the biggest PITA for me. Going for my 300-101 next week. I am watching Keith's course on CBT to try to figure it out.
@Sniperkag
5 жыл бұрын
I recently discovered your channel. I love it. Thanks.
@camrynfreeze
5 жыл бұрын
Ok, Chuck... I have to know what kind of coffee setup that is. I've been in the coffee industry for a long time and I've never seen that particular config. Love your channel by the way!
@red5standingby419
5 жыл бұрын
I was due to build a new gaming PC since my old one was about 4-5 years old. I just built a Ryzen based system with 64GB's of RAM. RAM prices are dropping again and Ryzens have a lot of cores. Bought a copy of VMWare workstation Pro v15 ($250). Installed GNS3 VM locally and bam.. done. And I can game and everything else on it. Just spent some extra money up front and I'm good for years to come.
@ThaoNguyen-rb2jk
5 жыл бұрын
I can't connect GNS3 from VM Server on Azure " Cannot connect to {}. Please check if GNS3 is allowed in your antivirus and firewall. "
@popcornplaersyr
5 жыл бұрын
same here please help Chuck!
@jasonstephan4389
5 жыл бұрын
@@popcornplaersyr I get the same error. It is annoying. Anyone have an answer to the "Cannot connect to Server. Please check GNS3 is allowed in your antivirus and firewall."?
@davegraham3941
5 жыл бұрын
@@jasonstephan4389 Have you made sure that GNS3 is running on the server?
@jasonstephan4389
5 жыл бұрын
@@davegraham3941 Yes I have now. Also found some information on GNS3 site that allows me to run the program as a daemon/service on the server. Might be helpful. docs.gns3.com/1r-SWM3ro8ArPjMHgQslphaLLTjxx0fgOnOCq_1eGajA/
@JohnAussieMate
5 жыл бұрын
Ok, I have tried to replicate the issues you and some others have encountered, and the only way to reproduce it was to "forget" to run the second part of the script that you run in the Server you created. Do not forget to use putty, log in and copy-paste the command: cd /tmp curl raw.githubusercontent.com/GNS3/gns3-server/master/scripts/remote-install.sh > gns3-remote-install.sh sudo bash gns3-remote-install.sh --with-iou --with-i386-repository Hope this resolves this for you guys.
@iamgalaxey
5 жыл бұрын
Subbed immediately this is golden information!
@MannyRoutes
5 жыл бұрын
Great video Chuck! I'm currently building out my homelab and was actually thinking about this. Haven't seen many cover putting a homelab into the cloud vs. having an on-site server in my rack. Like the constant question goes: "Hmm should I buy that $300-$500 server, make it a bare metal server to host a bunch of VMs OR...maybe put it in the cloud?" I"m going for my CCNP R&S next but, you've been making me curious to give Azure a look a look once I'm caught up. As you said, a lot of things are migrating that way now.
@justinhowarth960
5 жыл бұрын
From the UK thanks fella
@JoelRivera3
5 жыл бұрын
You should try EVE-NG on Azure. I have it on my Google Cloud account. The good thing about EVE-NG is that it’s accessible via the web. Perfect for someone like me who works in an environment that is very strict on security.
@NetworkChuck
5 жыл бұрын
I've never used EVE-NG. I think I might try it now. Thanks!
@sipart
5 жыл бұрын
+1 on that - thelantamer, shipintbrief and the ithitman all done posts on doing this - thelantamers video is about getting EVE-NG in Azure. The other two in GCP. But worth noting the UKSM kernel feature (in the EVE-NG customer kernel) only works in GCP. Using the EVE-NG custom kernel in azure will cause your vm to be unbootable! My notes here: github.com/sipart/spring_lab/blob/master/GCP%20setup%20and%20more.md Worth checking out forward essentials as well :-) Top level readme for my post above: github.com/sipart/spring_lab/blob/master/readme.md
@445Matty
5 жыл бұрын
@@sipart So there's no way to use it in AWS?
@hakwrg
4 жыл бұрын
Too bad couldn't make it work, keep getting different errors while trying to use the script, like not enough quota cores, already googled different solutions without results
@Vdrtez
5 жыл бұрын
Best intro in KZitem!
@joelmck
5 жыл бұрын
Bruh... most important question of all from this video (by far): What's the make/model of the coffee maker you are using? I need to know.
@reedlinares
4 жыл бұрын
After my last comment, I noticed that NetworkChuck doesn't really interface with his viewers. Bad!!!... I went out and found the Vaccum Pot Coffee percolator. You can check it out here: kzitem.info/news/bejne/w2mmvJWehYyYdII
@ITxHURTSxWHENxIP
5 жыл бұрын
Thanks so much for this! I was looking to refresh my CCNP knowledge and start heading towards CCIE and this is gonna help me a ton and save me a lot of headache. Can you do another video on how to obtain Cisco images?
@btodus
5 жыл бұрын
Great video Chuck. This was so easy!!! A blessing after multiple attempts using other video's and AWS. Now I can hopefully setup my ASA with ADSM for my CCNA-Security studies. Will this VM be powerful enough to handle that? I'm using Cisco Virl image... Thanks again dude ; )
@glennllovia7030
5 жыл бұрын
Splendid!! Thanks Networkchuck
@sarahmarie1898
5 жыл бұрын
NetworkChuck is not about networking. Networking is just a prop for the real lesson - How to make coffee in new and interesting ways! :)
@NetworkChuck
5 жыл бұрын
You got me. :)
@MinecraftAzsassin
5 жыл бұрын
Super interesting. Now this has me thinking of somehow locally deploying this on my home lab servers. Looks like simple powershell so maybe a look at the source code on github will allow me to tweak it or run smoothly off of a Windows Server VM (which will deploy to a Ubuntu Server VM inside it as seen here). Who knows maybe it’ll blow up in my face! :D
@NetworkChuck
5 жыл бұрын
This is Azure powershell, which requires the azure module and is only pertinent to Azure. That being said, you have a couple of options for on-perm, either use the GNS VM image, you just deploy this in HyperV, or you setup at Ubuntu server and run the bash script to install GNS3
@reynaldojrpanganiban5635
4 жыл бұрын
Whoa!! This is awesome 😎 thank you Chuck!
@NegroRotary
3 жыл бұрын
We need a video about GNS3 Chuck
@seanmchugh9027
4 жыл бұрын
That's awesome!!! I was just watching David Bombal's series on GNS3 and I was thinking to myself I don't have enough resources to do what I want to do with it. Now that I realize I can have my server in azure instead of my local machine that's not an issue. I just have to pay to access the cisco images
@unstable8968
3 жыл бұрын
Cant u find them free?
@stubby0990
3 жыл бұрын
The gns3 install script is using an repository for gns3 that is using 0.8.7 which is not compatible with modern GNS3 clients. If you run into issues this maybe why. You can see the version of your gns3 on your ubuntu vm after install by the cmd type apt-show-versions
@williamw.2610
3 жыл бұрын
Thanks I guess I'll try editing his script
@anthonysutherlin
2 жыл бұрын
@@williamw.2610 you can also do: sudo apt update, sudo apt upgrade and sudo do-release-upgrade
@CaylaBriExperience
5 жыл бұрын
Can you give us a tour of your lab / home office setup
@NetworkChuck
5 жыл бұрын
Good idea!
@kelecortez5834
4 жыл бұрын
Aloha chuck, been in HI for 15 yrs from TX. really dig ur content & passion getting my CCNA & Comptia Sec+ in the nex 15 days end goal is to become an azure architect. ...im aware i need to lern C#, WAT OTHER recoms do u have to shar ? Mahalo Cortez
@AMAN1AC28
4 жыл бұрын
Thanks for the content and keep up the great work man!
@benson3k4
4 жыл бұрын
Hey I was late to find this video .. Great it works really awesome
@zezerik
4 жыл бұрын
Thank you for the tutorial. Worked great.
@johnmichaelechavez5979
5 жыл бұрын
This is brilliant, also the coffee thing
@watergrunt3694
5 жыл бұрын
This is a GREAT video!!! Thank you Chuck.
@stevej72grox
5 жыл бұрын
Thanks Chuck. This was great. Ive been looking for an easy way to setup labs for CCNP. Your instructions were spot on. Would you recommend increasing CPU and RAM on the server for larger typologies in GNS3?
@NetworkChuck
5 жыл бұрын
Only if you need to. And with Azure it is SOOO easy.
@NetworkEvolution
5 жыл бұрын
Great information NetworkChuck. Thank you!
@nazaninyounesy8765
3 жыл бұрын
Is anyone else having issus with the version? error : GNS3 controller version 2.2.17 is not the same as compute "servername" version 2.1.21
@smar3tech343
3 жыл бұрын
I enjoy ur videos I learn a lot everyday lab I love tech this is awesome 😊🖥💻⌨️
@MarkAnthem
5 жыл бұрын
I'm hitting a wall at putty its saying my host doesn't exit.
@tsivikas
7 ай бұрын
What about qemu images? Also what about the storage which you always pay for the azure storage even if it is shut down
@rosinrob6457
2 жыл бұрын
hey bud I'm looking forward to new #ThisIsIT videos! Great job on the free courses my dude. I've learned so much from your videos & i can speak for everyone by saying we love you man! PS where can I get a coffee setup like you have in this video? I am intrigued by such a contraption. Links??
@RetiredFan
4 жыл бұрын
I like the Alexa speakers😁😁
@md.ishraquebinshafique1968
5 жыл бұрын
This is awesome. Can you please make a guide to setup a lab on cloud for RHCSA/RHCE?
@joshrich3285
4 жыл бұрын
Anyone else more focused on the coffee maker than anything he said in the first half of the video! 😂
@JSomerled
3 жыл бұрын
Brilliant!! This is the way to go.
@alreid12345
5 жыл бұрын
Hey Chuck. I see a few others have commented but you need to try EVE-NG. The professional edition is worth the extra little bit of money as well. Amazing and can be run fully in the browser.
@NetworkChuck
5 жыл бұрын
Yep, lol, I’m finally listening. I’ll try it!
@alreid12345
5 жыл бұрын
@@NetworkChuck good man Chuck. The community edition has some limitations but the Professional edition is amazing. Uldis will maybe give you a trial for review.
@isaacmolina9818
3 жыл бұрын
Another amazing video! I'm having trouble with my Azure GNS3 not being up to date. Is there a way I can update it to match my local GNS3 client? I'm just starting off and I'm not too sure how to upgrade programs within Azure Powershell. Thank you!
@shawn4626
3 жыл бұрын
Glad I’m not the only one
@JamesHaist
3 жыл бұрын
What Brewer is that in the beginning?
@lukaszparalusz1112
4 жыл бұрын
Hello NetworkChuck I have a question what would be the minimum recommend VM to run GNS3 without any issues. The one you recommend is Standard D4s v3 which is £128.65 month estimated cost I know that I will not utilize this but can I go with B2s or B2ms I am looking for the cheapest option for my wallet that will actually allow me to do its job.
@audiencemember1337
5 жыл бұрын
Came here for an azure tutorial got a coffee machine looks like some elaborate drugs contraption
@ProjectRK3147
3 жыл бұрын
Great video sir Chuck. Can you do a review between GNS3 vs EVE-NG? thanks in advance.
@edgranados
2 ай бұрын
Not working for me, I was able to create the server in Azure but when trying to use GNS3 from my laptop it sends some request to the server but it says that my firewall is blocking it, I turned off my firewall but get the same issue. I can login to the server through putty.
@noelrodriguez
4 жыл бұрын
NetworkChuck: It looks like the container from the script installs 2.1.21 but the latest version of the GUI is 2.2.7, how will go about upgrading the Azure instance to 2.2.7 ???
@chrisharper5801
4 жыл бұрын
Try upgrading your VM's Linux distro to 18.04 then from the VM re-run "curl raw.githubusercontent.com/GNS3/gns3-server/master/scripts/remote-install.sh > gns3-remote-install.sh" then "sudo bash gns3-remote-install.sh --with-iou --with-i386-repository" from what I found looks like there is an incompatibility with the python version that runs on ubuntu 16.04 with the gns3 server 2.2.xx you may even get away with updating the python version to >= 3.5.3 on 16.04 OS.
@stevedecker4510
4 жыл бұрын
You were making that coffee for show, right? LoL! Also, Microsoft offers not only $200 credit for the first month but you also get $50 per month for additional 12 months!
@TechieTurnedInvestor
5 жыл бұрын
You left out the part where you have to buy $200 Cisco VIRL..
@azbigballa
4 жыл бұрын
Obviously you and the 7 losers who up-voted your comment did not watch the video though its entirety! He did mention the free $200 and that he only 5/200 in like 20 days. Hopefully you are not hired to read and execute any action. Jeez!
@TechieTurnedInvestor
4 жыл бұрын
@@azbigballa Hopefully you don't get hired to write anything in English
@simofsimenz
5 жыл бұрын
Great video networkchuck. For students Azure has a $100 credit and a ton of other free cloud resources for 12 months.
@olamidearibisala
5 жыл бұрын
Woah😲, that's cool. Please how do I get that?
@thfc1973
4 жыл бұрын
Thanks for posting this fantastic video Chuck, I had to downgrade my local version of GNS3 to speak to the server in Azure as the local copy was a later version - bit of a newbie question but how do you update GNS3 server on Ubuntu to the latest?
@NetworkChuck
4 жыл бұрын
Thanks Michael!! As of now, there isn’t a good way because we are at the mercy of GNS3 and how often they update their packages in these repositories.
@thfc1973
4 жыл бұрын
NetworkChuck I have one more question, what are you more passionate about, IT or coffee? I’m a Brit so only drink tea 😉🤣
@laihsb6393
5 жыл бұрын
Are you allowed root access when you are SSH'd? I tried "su root" and entered my password but it fails each time. Are we not allowed root access under Azure? EDIT: Never mind, I ran "sudo -s" and it worked fine. Thanks for the video Chuck!
@vishnu5558
4 жыл бұрын
I'm not able to connect from GNS3(Azure ) through GNS3 client. Version mismatch. Please suggest Client version 2.2.3 is not the same as server (controller) version 2.1.21
@CiscoPhipse
4 жыл бұрын
Did you get this sorted? I'm getting the same sudo apt-get update sudo apt-get upgrade nothing?
@chrisharper5801
4 жыл бұрын
@@CiscoPhipse Try upgrading your VM's Linux distro to 18.04 then from the VM re-run "curl raw.githubusercontent.com/GNS3/gns3-server/master/scripts/remote-install.sh > gns3-remote-install.sh" then "sudo bash gns3-remote-install.sh --with-iou --with-i386-repository" from what I found looks like there is an incompatibility with the python version that runs on ubuntu 16.04 with the gns3 server 2.2.xx you may even get away with updating the python version to >= 3.5.3 on 16.04 OS.
@CiscoPhipse
4 жыл бұрын
@@chrisharper5801 Thanks. I managed to resolve it not long after I posted the comment 🙂 You're right, the versions were different so it didn't like it. Once both versions were the same it worked 👩💻▶️
@trondhh
4 жыл бұрын
@@CiscoPhipse a way around the problem github.com/GNS3/gns3-gui/releases/tag/v2.1.21
@rodriro3
5 жыл бұрын
Where do I buy your coffee percolator? Also like the Azure tutorial
@manthing1467
5 жыл бұрын
So glad CBT lowered their price to $60, way more reasonable. CBT is the best by far. I am betting this was a smart move for them.
@NetworkChuck
5 жыл бұрын
It’s a game changer!
@nitroboxster4267
5 жыл бұрын
Thanks Chuck :) Appreciate you.
@pedrohenriquesilva4089
Ай бұрын
Chuck, I'm facing issues to add devices... when I try to add Qemu based emulators I get the warning "The selected server does not support KVM. A Linux server or the GNS3 VM running in VMware is required." Wha could I do for this case?
@desmondeguakun1487
4 жыл бұрын
Thanks for the videos Chuck. How do you upgrade the VM in Azure to the latest version?
@Kilocron
5 жыл бұрын
I totally love this idea. GNS3 is a nightmare to set up, but this looks like it'll be piece of cake and I could access from anywhere! Love it! I'm going to try this out. After the trial is over though, what kind of monthly cost would you expect to see with a fair amount of use?
@NetworkChuck
5 жыл бұрын
The estimated monthly cost of that size machine is around $170....now don't let that scare you...that's an ALWAYS ON estimate. What's great about Azure is after a few days of normal use, it will give you an future cost estimate in the cost analysis.
@pedrolvillarroel
5 жыл бұрын
Thanks for this video dude amazing #lovenetworking
@sipart
5 жыл бұрын
Instead of doing this in Azure do it in the Google Compute Platform. $300 credit that lasts a year. :-) Post here on EVE-NG in GCP and I suspect you still need nested virtualization for GNS3 (I haven't watched all this video so this may be mentioned) - so take note of the initial image creation in this post: ithitman.blogspot.com/2018/04/configuring-eve-ng-on-google-compute.html?m=1
@DCSGuides
5 жыл бұрын
@@NetworkChuck Have you done this, would be able to provide a rough figure of how much this would cost per hour also if there are static monthly fees included include. I figured I can just turn the machine on and off as needed and am curious as to how much that cost. I do this with AWS and regardless of power state I do get flat rate charge for the dedicated SSD space I have for it. So I am just trying to get a ball park # number if you have any thoughts...
@DCSGuides
5 жыл бұрын
P.S..... Awesome video, I truly appreciate you taking the time to upload this content
@aragoza
5 жыл бұрын
Can you use this for collaboration labs? Guides would really be great, Chuck! Been a long time since there was one for collab!
@NetworkChuck
5 жыл бұрын
Yeah, I was thinking about it. The official support for CUCM in the cloud isn’t there yet but it won’t stop us from trying.
@aragoza
5 жыл бұрын
@@NetworkChuck Would be a prime video if you can make it happen!
@avinashshankarpalli2130
5 жыл бұрын
Hey Chuck, Great Video.Can we use the same concept to use the server in AWS?
@Shonobi025
5 жыл бұрын
Hey Chuck, I just started a job as a basic support tech at a little small business network management company. I want to grow and learn more. Where would you recommend someone start with learning? Any feedback would be greatly helpful. Thanks for the great content!
@jmitchell1126
4 жыл бұрын
Got it up and working thanks Chuck. Is it possible to add my virtual box win 10 vm to use in my labs?
Пікірлер: 448