A) Select Manul for CONNECTION.
B) Enter the IP address that you previously noted from your DVR's TCP/IP setup screen in the ADDRESS field. IMPORTANT: If any of the number fields in the IP address contain leading zeros, they should be removed. For example, if your DVR's IP address is 192.168.0.1, you should enter 192.168.0.1.
C) Enter 8000 for PORT
D) Enter admin for USER ID
E) Leave the password blank if you did not setup a password on your DVR or enter your DVR password if you did set one up.
Press OK when done.
You should now see an entry created for the local area connection (Intranet) information that you just entered in the Site Setup list on the IRS Setup screen. Click on the entry that you just created so that it is highlighted in green then press OK.
On the main Integrated Remote Station screen click on the Transmitter button. This will open the DVR transmitter which is that new DVR viewer application. You can note that also in this list there are other application. Although this application replaces the DVR Viewer, you can see there is still a Viewer application available. This is so that older legacy DVRs can still use the IRS application by using the DVR Viewer. Remember for the dual codec DVRs you should use the Transmitter because you will get better performance as it takes advantage of the H.264 MPEG-4 video encoding built into it.
Once the transmitter application opens, the connection information that you setup will be populated in the upper right. Click on the Connect button. The transmitter should fairly quickly connect to your DVR and display your security cameras.
If you are unable to connect, please go back and to this section and assign an IP address to your DVR.
If you are still unable to connect, continue to the next section to setup port forwarding on your router and complete it, then try to connect again.
Негізгі бет Ғылым және технология cctv camera on mobile without internet बिना इन्टरनेट के अपने मोबाइल पर सीसीटीवी कैमरे को देखें
Пікірлер: 204