Pre-order now available at Amain: 🔥🔥Galaxy Blue: bit.ly/CENF450Blue 🔥🔥Gray Titanium: bit.ly/CENF450GREY
@thebigsho665
3 жыл бұрын
Get mine 3-16-21 I went with the blue I've never even seen one up close or ever owned a cen product but I can tell you now I'll end up owning atleast 2 of these!!!Not only am I a ford fan but these trucks are versatile imma make a tow/hauling/pavement princess.Then a scale dragster brushless go fast scale basher!I'm glad it's got open diffs so you can control it!If your going to make a big ass crawler/mudder/snower then yes lock em!!!But if not you would have to be a moron to lock em!
@sirchirpalot
3 жыл бұрын
Great vid Tony, I just got mine and i was wondering how to switch to high speed gearing, I'm surprised how easy it is.
@CCxRC
3 жыл бұрын
It is very simple. Gives more room for additional power buy changing the pinion at a later time
@SwampersRC
4 жыл бұрын
Great job on the demonstration!👍 That's a really cool feature they've built into this truck. The more I look at this truck the more I like it! (It's still tempting to see if they make the bodies and wheels available!) For $370 US it looks like a great deal! I would like to see it next to your TF2 for a scale comparison!
@bl_jacobs
4 жыл бұрын
Thx for the tip when I get mine ima make it go insanely fast
@ReadySetRC
4 жыл бұрын
Great video Tony! Very informative👍👍 Can't wait until I get mine.
@chucksmith155
2 жыл бұрын
Thankyou Tony this is my come back to video on changing the gears I just got my second 450 and have changed other peoples gears for them thanks again for this video
@garrycraig1425
2 жыл бұрын
Was the video ever in focus? OMG it was horrible to try and watch lol
@andrewnoonechangethename614
Жыл бұрын
Unfortunately this doesn’t work on my motel the gere that the rod comes out of it dose not come out
@sy55legrc
2 ай бұрын
Perfect thank you for this, going to sort mine out now
@meefthepotatoe4363
6 ай бұрын
🤔 so new out the box it’s geared low ? so once this is done it’ll run faster ?
@CCxRC
6 ай бұрын
Yes
@LRCR
4 жыл бұрын
That is a cool way to swap speed gears, do you know if the spur can be upgraded to metal? ✌️😎👍 HFLPRCing 🌟 RCF4L 😷 Stay Safe Tony
@theoneandonlyalford
3 ай бұрын
Was the pinion metal?
@mr.sinister1279
3 жыл бұрын
Wow u think they could of made it much easier than taking all this shit apart!!
@fords4life914
2 жыл бұрын
Is that a 12mm hex?
@wootwootjr
3 жыл бұрын
My driveshafts won't spin while attached to the motor after switching to high speed gearing, wheels are completely locked up. I'm not sure what I did wrong. My mesh isn't too tight, any looser and it starts to slip.
@ScarabChris
3 жыл бұрын
I was wondering if the same could be accomplished by putting a slightly larger pinion gear on the motor. I have the truck. I don't need it to be super fast but I would like it a little faster on the pavement. But I don't want to lose the torque because I like to do some light off road running and I tow a 16 lbs RC boat on a big trailer. I wish there was a 2 speed (auto) trans. I know they exist but if anyone knows of one that will easily go into the CEN 450 please reply.
@frederickbehn5610
3 жыл бұрын
Can you put Tamiya diesel truck rims and tires on this truck, and give it a more stock looking Dually?
@spoolyboi9434
4 жыл бұрын
Would have been awesome if you were able to change gears with a servo and 3rd channel vs opening it up to do so, but very cool either way.
@vbspeed7571
3 жыл бұрын
These r bad ass..rigsss..got the gray one
@rodneystewart2691
3 жыл бұрын
If you take it all apart make sure you put the mini gear on the output shaft above the pin
@migueltorres4736
4 жыл бұрын
When I get mine I'm putting hydro's in it ..
@jknewb6276
4 жыл бұрын
Good morning Tony way off topic but i didn't really get to run her last night was a little dark. I'm only using a 3300 mah 50c 3s as of now. I should be running 5500 as you already know lol. I was worried about a grinding noise in the back when you push it. Pretty sure it's just the metal gears i popped off the cover and the gears are in line. Thanks Tony for being welcoming and helping out a Newb!! 😎🤘
@CCxRC
4 жыл бұрын
J&K Newb that’s normal with metal gears. They chatter when you push them 😀
@jknewb6276
4 жыл бұрын
@@CCxRC awesome brother i really appreciate the quick reply my man you rock!! Have a great day!! 😎
@LuisOrtiz-ju7ot
4 жыл бұрын
Where I can buy one of those?
@Ecobeastsoffroad
4 жыл бұрын
What brand 1/4” bits are you using and what brand is that shock wrench?
@CCxRC
4 жыл бұрын
I'm using the Integy Hex bits: bit.ly/Integy_Hex_Set MIP SPeed Tip Ball Hex : bit.ly/MIP_SpeedTip Protek Shock Pliers bit.ly/Protek_ShockPliers
@DavidMartinez-ju3eh
4 жыл бұрын
That is cool
@CoachD386
4 жыл бұрын
Your thoughts on how do you think this will hold up with a brushless system in it?
@CCxRC
4 жыл бұрын
Transmission should be fine. Diffs may need the aluminum casing added. Not sure yet. Plan to find out though 😉 I’ve got the heavy duty diff gears and cases on standby.
@CoachD386
4 жыл бұрын
CCxRC that’s what we(gap, myself, mobay, etc.)want to see. I say it’s more the for the scale guys honestly, I’m looking at it as a hauler and also maybe testing some other waters with it. 😈
@chrissmarduksrccarcarnage4940
4 жыл бұрын
Nice...👍
@TazBeGaming
4 жыл бұрын
Does anyone know when this truck goes up for sale for the public?
@CCxRC
4 жыл бұрын
it's up for Pre-order. SHould be out in Oct/Nov
@TazBeGaming
4 жыл бұрын
CCxRC Thanks, got one on preorder!
@hollerboy9452
3 жыл бұрын
@@TazBeGaming did u get urs yet
@TazBeGaming
3 жыл бұрын
@@hollerboy9452 yeah just before Christmas it’s a sweet truck
@bocefuss4500
4 жыл бұрын
thanks for the link on pre-order! nobody mentioned what size wheels it's running need to know so i can shop around for different tires
@CCxRC
4 жыл бұрын
They are like 2.8” it’s not detailed on the specs and that’s my rough measurement
@bocefuss4500
4 жыл бұрын
@@CCxRC Thank you sir !
@freaky_vro
3 жыл бұрын
@@CCxRC hey man, so when I try to take off the spur gear thing it doesn’t loosen just turns even when I hold it
@covermchone99
4 жыл бұрын
Can you get a arrma kraton exb
@CCxRC
4 жыл бұрын
I have one. Haven’t opened it yet.
@Ikonzrc
4 жыл бұрын
#28👍
@isiahanderson3001
4 жыл бұрын
What is the name of that tool u have plz need one
@paulclancy2404
4 жыл бұрын
A drill 😆
@paulclancy2404
4 жыл бұрын
I think thats ryobi 6volt screwdriver
@CCxRC
4 жыл бұрын
Ryobi screwdriver with MIP bits (and I they bits, but they can be out of stock a lot)
@paulclancy2404
4 жыл бұрын
Those are good bits , I need to get , stupid bc buy set than still need the 3.0 I think one of them 🤔
@freaky_vro
3 жыл бұрын
I need your help, the truck makes a whining noise and won’t move, I thought it was the gear but they look and move fine. Do I need a new motor? And it’s getting very hot almost Instantly, same with the wires
Пікірлер: 53