Hi there Witch direction does the primary turn to take out the nut ? THANK YOU.
@zforce950driver9
4 жыл бұрын
if you look you will see a hole in the secondary that is threaded , all you do is run a 6mm bolt in that hole and it opens up the pulley and the belt comes right off, you dont take anything off except the belt cover.
@TDKRepair
4 жыл бұрын
I will have to try that when I replace the belt next time. Thanks for the advice.
@chadellison5875
3 жыл бұрын
You have to remove the big nut or it won’t open when you put the 6mm bolt in it to open it
@JGard417
3 жыл бұрын
Is the aluminum belt housing cast into the block or is it a bolt on?
@RoyerRogers545
3 жыл бұрын
Bolts on
@daleprokop1268
4 жыл бұрын
Where did you find the torque specs?
@TDKRepair
4 жыл бұрын
If you search you can find free downloads for the service manual
@pierre-luclauzon5486
6 ай бұрын
where the one way bearing???
@Loop307
9 ай бұрын
No doing. That on the trail.
@johncollins5501
3 жыл бұрын
That's how you do a instructional video
@juicepipe
3 жыл бұрын
What causes the belt to shread? Was it the weights or not? I have replaced my belts twice 2 different brands. One is an Ultimax belt and the other was a Lostar belt. They both got shread after riding less then 30 miles. Let me know what you think.
@avivwaiss
2 жыл бұрын
is there a link to buy the original CFMOTO Zforce 800EX CVT Belt?
@eltorito9986
4 жыл бұрын
Do you have the part number for the cfmoto belt and where did you buy it? Thx...
@TDKRepair
4 жыл бұрын
I purchased my belt on eBay, but any dealer can get it as well. The part number is 0800-055000-0001
@chadellis8732
3 жыл бұрын
Yeah how where you able to hold the clutch and get the 80 lb pounds? I acually just changed mine and at first had a slight clutch rattle. Gave it half throttle and had a loud screech noise and it wouldn’t move anymore.
@stevebates3573
3 жыл бұрын
Very informative video. Needing to reclock my secondary for 28 inch tires I installed. Going with c1 instead of b2. Could you please share how you were able to torgue to 80ft lbs. Special Spanner tool ?
@chadellison5875
3 жыл бұрын
After I changed my belt, it has a slight rattle at idle. Only thing I can think of is the plate holding the bearing in the cover was a little bent inward...
@lindsayk41
2 жыл бұрын
You're a true professional very rare you see somebody on this KZitem that I can learn from anybody to be happy to have you for a mechanic on a crew!
@korsu1234
3 ай бұрын
Thx 4 good vid,best 1 i found😊😊😊
@EDDIEW1982
4 жыл бұрын
I got a ultimax belt instead of the stock CFMOTO belt and it’s a world of difference. And also half the price.
@TDKRepair
4 жыл бұрын
How many miles do you have on it? I would be willing to give it a shot, but was very disappointed with the Gates belt, especially since the reviews online are good.
@EDDIEW1982
4 жыл бұрын
TDK Repair I was told to stay away from gates, my local dealer sold me this one for $99. I had 1900 miles on my machine.
@eltorito9986
4 жыл бұрын
Thhank you, great video...
@eltorito9986
3 жыл бұрын
Would you have the part number?
@RoyerRogers545
3 жыл бұрын
@@TDKRepair hi do you know which gates belt? They have 3 compatible models: 40G, 40C and 40R.
@sxsoffroad43
2 жыл бұрын
How did you torque them ? How did hold clutch?
@SaboSells
3 жыл бұрын
Very good instrucions. How did you get a Torque wrench in there to tighten the nuts?
@ATVONTOUR
3 жыл бұрын
Wow certainly not an easy trail side repair.
@daverozic
4 жыл бұрын
Do you have to take off the rear tire to do this or can you do it without removing it?
@ryangertridge
4 жыл бұрын
Should the clutch only spin free one way???
@tristanfelix7245
4 жыл бұрын
Is this all the same for a 500 trail
@Loop307
3 жыл бұрын
So what do u do on trails. That’s bad. Deal
@ericabeyta7278
2 жыл бұрын
TDK Repair how did u torque to 80 lbs? I had trouble trying to hold the clutches from spinning. I only removed the main clutch not the secondary to put my belt on. I just tightened it with my dewalt torque gun and put loctite . 2017 800 trail.
@daleprokop1268
4 жыл бұрын
How did you even drive with that belt lol
@TDKRepair
4 жыл бұрын
LOL I didn't. Got stranded and had to get trailered home!
Пікірлер: 36