I picked one up similar to the champion, forget the name but it has a quick release lever on it to rapidly open and close. then you screw down some and it tightens up. Never used it, now I know how versatile this is!
@joemeyer5645
2 ай бұрын
Thank you, great video! My Stanley vise no. 80-702 (aluminum) has single holes, not double holes, so I suspect the second holes were added by a previous owner. Really love the discussion of history of tools!
@cnew4682
2 ай бұрын
Awesome video. Thank you.
@johnmoore1223
Жыл бұрын
Great video, as always. Thanks for creating this.
@dennismeko
Жыл бұрын
Enjoyed the very informative video.. I have similar vises, one steel and one aluminum..
@mitchwoodwork
Жыл бұрын
That's a neat vise design. Great spoons too
@haleyhorton-loup3257
Жыл бұрын
Great video! No idea something like this existed. Do you find that the lack of full vertical jaw support on the champion vs the Stanley impedes it's ability to clamp things upright, such as door frames or boards that are being dovetailed?
@ChetSpier
Жыл бұрын
No,?not really but I would never use those lower wing on their own. Could snap.
@BronZeage
Жыл бұрын
Great video.
@ChetSpier
Жыл бұрын
Thank you kindly.
@captonager
Жыл бұрын
Great video Chester. I enjoyed that. I had not seen this type of vise before. I have been doing some woodcarving and I can see the value of this kind of vise. Thanks!
@BrianRust89
Жыл бұрын
I also have a Stanley and a champion vise just like these. I recently picked up a similar vise to these that is a quick action vise. It has a hexagonal lead screw with a series of washer type nuts inside the mechanism. You can slide it in and out to the size you want freely and then once you tighten the lead screw it will tighten the jaws together. Very cool vise. No makers mark just the pat. #. If you are interested I can post that pat. Number for you. Thanks for the video!
@ChetSpier
Жыл бұрын
I of course I’m interested. Lol. Thanks
@BrianRust89
Жыл бұрын
@@ChetSpier awesome! I will go out to the shop soon! I wish you could post pictures on here. If you’d like I just started a channel myself. I’d love to get your input on it. Maybe give me some pointers? Thank you sir!
@BrianRust89
Жыл бұрын
@@ChetSpier “PAT 12 26 22” is stamped on one side. Then one jaw is marked 55 and one jaw is marked 56. I’m sure they are just part numbers. It is a very unique vise though! I looked closer and the casting where the lead screw protrudes through it has a wedge/ screw type ledge around it. Which causes the “washers” to can’t as it is spun. Or when you tighten the vise. There is also a pretty substantial spring that keeps those washers in tension and close together. It also has two guide bars above and below the lead screw. It has a fraction of the slop and play the Stanley and champion has. I’ve never tried to find the patent but if anyone can I’m sure you can. If you do please let me know!! Thanks again!!
@transmundanium
Жыл бұрын
I have a Goodell Pratt No. 800 quick release vise similar to yours. Very handy!
@rockycon1967
Жыл бұрын
Watch out ebay, I need me a 700 now!
@doct0rnic
Жыл бұрын
Biggest difference I see is the champion doesn't have vertical jaws that are the same size as the jaws on top vs the Stanley both horizontal and vertical are the same size, at the time, Stanley could have argued they were different kind of vise's.
@hughcalder6156
Жыл бұрын
All aluminium stanley 702 clamps come with holes .. = not drilled by previous owner
@lawrencedeleurere4427
Жыл бұрын
How thick of a bench will it clamp to?
@ChetSpier
Жыл бұрын
Approximately 2 1/4”. Keep in mind that if your bench is thicker you can always clamp this to another board which can lay on top of yours and be clamped to that.
@lawrencedeleurere4427
Жыл бұрын
@@ChetSpier Thanks Chester. I might have to pick one up and experiment. I know they have versions that bolt directly to the workbench as well. It actually might be fun to try and make my own "L vise" and see what I can come up with.
Пікірлер: 22