The safety violations in this video would get anyone fired at my plant. ..
@plasticman3952
2 жыл бұрын
I guess as long as the mold closes and locks up, the mold protections are all set.
@tanveerkhan9221
6 жыл бұрын
Using a fork truck to install a mould is a sign of a crap company the guys using a tube on a ratchet which always makes me want to smack the person
@jacobdeemer158
5 жыл бұрын
tanveer khan don’t be such a bitch
@tanveerkhan9221
5 жыл бұрын
It's being a bitch which keeps workers safe
@XxGiffy23xX
4 жыл бұрын
A tube on a ratchet..? A breaker bar... why wouldn't he
@yaboyreege7158
4 жыл бұрын
Greg G you’re supposed to torque the clamp bolts down with an actual torque ratchet. Not use a breaker bar and guess how tight they are
@XxGiffy23xX
4 жыл бұрын
@@yaboyreege7158 I'm well aware you torque the bolts to 85 pds. Atleast in my shop. My comment was because of the one guy calling a breaker bar a "tube on a ratchet"
@TreebeardTTV
5 жыл бұрын
The dude doesn't even know what a Thermolator does. "Heats the material red hot"? That's not the thermolator brother.
@marke8323
5 жыл бұрын
How about when a mold hose would blow? kill the water to the manifolds, stop molder and get to the thermolators shut down before someone get burned!
@yaboyreege7158
4 жыл бұрын
Yea seriously lol the thermometers cool down water to the mold, they don’t heat the material lol
@williamtolliver4350
4 жыл бұрын
Thermolators heat or cool the water to a set temp. All our lines were chilled water unless it needed to be hot.
@joelb670
3 жыл бұрын
Man, ur using to much torque on theese bolts, youre only damage the threads! No need of leverage there!
@1971efc
3 жыл бұрын
That Mould should not be able to open while the door is open -- the safetys have been disabled
@williamtolliver4350
4 жыл бұрын
This is the PERFECT example of how NOT to set a mold.
@kevinbragg7273
Жыл бұрын
100 % agree. This makes me appreciate my company a lot more. We have proper hoists and far more efficient procedures. I change 4-6 molds per day.
@landryleopard562
5 жыл бұрын
Better take this video down before OSHA sees it
@frankalbertsson2934
Жыл бұрын
Been doin like this for 35 years....my factory is in great progress......NOT......
@marke8323
5 жыл бұрын
On a few occasions we used a fork truck to set molds but I think it is much more dangerous and increases the chance for Mold/Molder/Set-up Tech damage, I was never comfortable watching Molds swaying like wind chimes... Overhead cranes are much safer.
@PedroSantos-yf8nr
5 жыл бұрын
So what can you use instead of the fork truck to set the mold? considering mold's weight?
@marke8323
5 жыл бұрын
@@PedroSantos-yf8nr A Three Ton overhead Crane
@yaboyreege7158
4 жыл бұрын
Marke crane is the way to go. I’ve had to set a few molds with a forklift and not only is it harder to align the mold with the locking ring, but it also leaves you very little room to work. It’s just a dangerous technique altogether. Luckily we have cranes but sometimes people are stupid and end up breaking them
@aaronvest6824
5 жыл бұрын
Where’s the torque wrench?lol
@marke8323
5 жыл бұрын
Right, we were required to Torque the Mold Platen bolts too!
@williamtolliver4350
4 жыл бұрын
He would rather stress the threads.
@zanekidd4394
6 жыл бұрын
Super old mold and machine
@Vilibuster
Жыл бұрын
wait, is he putting clamps on the sides? its top and bottom.
@eliassanto2816
Жыл бұрын
Senza parole
@chas7193
5 жыл бұрын
Where is his safety glasses at, and don't use a pipe on a ratchet, plus we aren't allowed to dress like that at work.
@williamtolliver4350
4 жыл бұрын
Hell no. Cintas had our money. It was mandatory to wear a uni.. And better than havin my wife jack up our washer.
@williamtolliver4350
4 жыл бұрын
And a fuckin TORQUE wrench
@muhammadfahrulloh3090
3 жыл бұрын
terlalu ribet beresiko, masa set up moulding pakai alat bantu forklift,,, ga efektif Bos
@parisramos8504
3 жыл бұрын
I set 5-8 molds like this in a 12 hour shift, hate working under a load but work is scarce in Utah and OSHA doesn't really exist here
@joelb670
3 жыл бұрын
Tgough, like theese zip ties. No ware on the cooling lines, at least rhats good.
@davepearson8859
7 жыл бұрын
Number 1 ( NOPE ) Hell no Safety all the way cant watch rest of Vid F n
Пікірлер: 57