simple and to the point with no excessive talking. Well done sir.
@tradestutor1191
3 жыл бұрын
Thank you. I'm glad you enjoyed it.
@untalentedcartoonist1690
3 жыл бұрын
I was struggling I finally get it.
@athensstorytime3743
3 жыл бұрын
You do a very good job teaching this, straight to the point and very detailed and explained clearly. Thank you.. this will help on my red seal exam
@tradestutor1191
3 жыл бұрын
You're welcome. Glad you enjoyed it and thanks for watching.
@kindajacked5154
2 жыл бұрын
thanks man, im starting my plumbing apprenticeship and was getting really frustrated. you've made it simple and easy to understand, thanks again
@tradestutor1191
2 жыл бұрын
You're welcome. Thanks for watching!
@mattt4080
2 жыл бұрын
Great job! It makes perfect sense. I’m getting ready to start an electrician apprenticeship and knowing this will help me out a lot!
@tradestutor1191
2 жыл бұрын
Thanks Matt: I'm glad you enjoyed it. Thanks for watching.
@DJ-il8iv
Жыл бұрын
Wouldn’t metric just be easier?
@savannahtenace9170
2 жыл бұрын
thank you so much, out of all the videos and explanations you made the most sense. Keep doing what you're doing!
@tradestutor1191
2 жыл бұрын
Thank you. I'm glad you enjoyed it and thanks for watching.
@kennyperezhernandez5336
3 жыл бұрын
Thank you so much for this video, I tried looking for this info in several web pages and here I had as simple as a 3.19 minutes videos, keep doing this please.
@tradestutor1191
3 жыл бұрын
Hi Kenny: I'm glad it worked for you. Thanks for watching. Take care
@peterebenhoech8423
2 жыл бұрын
would love to see a video on sheet metal bending to figure out bend allowances
@ckent1984
3 жыл бұрын
mind blowned of how simple, it was.. you explained very well.. thank you so much
@tradestutor1191
3 жыл бұрын
You're welcome. I'm glad it worked for you. Thank you and thanks for watching!
@leahmarks7867
Жыл бұрын
This was great... easy to follow and super helpful, thank you so much!
@tradestutor1191
Жыл бұрын
Thanks. I'm glad it worked for you. Thanks for watching.
@David-excellent
2 жыл бұрын
Excellently explained! Thanks a lot. You should be a school teacher 👍
@tradestutor1191
2 жыл бұрын
Thanks and thanks for watching! In eal life I am a school teacher. I teach plumbing at a technical college.
@Dirtbagbuilds
3 ай бұрын
Thank you so much!
@33wolf33
2 жыл бұрын
Why is 1/16th good for 'our' purposes?
@jasonhenley84
5 жыл бұрын
Very informative and simplified. Thank you. I subscribed.
@tradestutor1191
5 жыл бұрын
thanks. I'm glad it helped
@tradestutor1191
5 жыл бұрын
Thank you. I'm gad you liked it
@natepayne3063
2 жыл бұрын
Very nice easy video thank you
@tradestutor1191
2 жыл бұрын
You're welcome. Thanks for watching.
@simplytrueyou9202
2 жыл бұрын
Thank you, you explained it perfectly. I have a builder's license test tomorrow and got hung up on rafter length.
@tradestutor1191
2 жыл бұрын
You're welcome. I'm glad it helped and thanks for watching. Take care and good luck with your exam.
@gonzalolagos1218
2 жыл бұрын
i'm sorry, I didnt understand how you turn 516 into fraction. Why 1/16? why you chose that? Thanks
@bigbird4481
2 жыл бұрын
Probably because that's the smallest unit on a tape measure that measures in inches
@-Antt.
3 жыл бұрын
I have a test on Saturday , I want that welding job so bad , I never studied for school for this shit , always failed math , I will really put my heart and soul into this test
@tradestutor1191
3 жыл бұрын
Awesome! What topics does the math test cover?
@-Antt.
3 жыл бұрын
@@tradestutor1191 it covers mostly the basics , fractions , decimals , feet and inches
@tradestutor1191
3 жыл бұрын
@@-Antt. Good luck. Here is a link to another resource that might help you out. opentextbc.ca/mathfortrades1/
@tradestutor1191
3 жыл бұрын
You can either read the book online or download it. I suggest reading it online. There are video answers and quizzes which are accessible online.
@-Antt.
3 жыл бұрын
Thank you so much ! After Saturday once I get updates I’ll let u know how it went
@sarahbilodeau-fressange900
4 ай бұрын
Beautiful 😊
@tradestutor1191
4 ай бұрын
Thank you and thanks for watching.
@meenaljain8806
3 жыл бұрын
Thanks you so much, this was much needed.
@tradestutor1191
3 жыл бұрын
You're welcome. I'm glad it worked for you. Take care.
@Cerealenjoyer45
2 жыл бұрын
This helped a lot, thank you!
@tradestutor1191
2 жыл бұрын
You're welcome. Thanks for watching.
@Elpipiton
Ай бұрын
Awesome man
@dangerous8333
3 жыл бұрын
Finally!!! Everything I watch shows 4/100 5/10. I was so confused...
@tradestutor1191
3 жыл бұрын
Hey Dan: I'm glad the video worked for you!
@TheJabra45
3 жыл бұрын
That was so helpful thank you sir 🙏
@assortedtempura1332
3 жыл бұрын
been looking for this. thank you sir
@tradestutor1191
3 жыл бұрын
You're welcome. I'm happy it worked for you.
@yared7806
Жыл бұрын
Or you can simplify things and use meters instead 😅.
@Topdawg48
2 жыл бұрын
where did you get 1/2 from.?
@amysho2192
6 ай бұрын
He simplified 8/16 by dividing top and bottom by 8.
@unknownone8479
3 жыл бұрын
Well when you put it like that, it's simple. Thank you
@tradestutor1191
3 жыл бұрын
You're welcome. Glad you enjoyed it and thanks for watching.
@ibi.b7233
3 жыл бұрын
Thank you so much sir I finally understand it I subscribed either tysm:)
@willkildare
3 жыл бұрын
Thank you master .. spot on ...
@tradestutor1191
3 жыл бұрын
Thanks Will. I'm glad you enjoyed it!
@bartbley1269
4 жыл бұрын
Good video In my trade I always done every thing in inches or MM to avoid any amount of conversions . the least amount of math the least amount of mistakes . To bad 100 ft. tapes weren't all in inches Millimeter 100 ft tapes were easier units of ten
@tradestutor1191
4 жыл бұрын
thanks for watching bart and thanks for your comments. Have a great day.
@be-honestindian3054
3 жыл бұрын
I also confused but solve my problem thanks
@alejandroochoa6212
2 жыл бұрын
Why the 16 ?
@bigbird4481
2 жыл бұрын
Probably because on a tape measure that measures in inches the smallest measurement is a 1/16th of an inch
@gurshaanbasra3639
2 жыл бұрын
Can you do this with Dec feet to inch? For ex 3.59' to 8ths
@tradestutor1191
2 жыл бұрын
HI Gurshaan: Luckily I already made one. Check the video list and you'll find it. Take care and thanks for watching.
@beansmith2465
6 ай бұрын
Y are you using 16ths
@tradestutor1191
6 ай бұрын
We generally go with 16th's here when dealing with the piping trades. This may differ in other parts of the country but here is just a standard we seem to go with. Take care and thanks for watching.
@tyronepope1616
4 жыл бұрын
I chose this tutorial to play for my class. Was not the best break down on how you ended up with the decimals, you skipped a lot of information leading up to the finale. Found here on you tube what was needed
@tradestutor1191
4 жыл бұрын
Thanks for the comment Tyrone: I'll relook at the video and see if I can tweak it all to make it better.
@33wolf33
2 жыл бұрын
How com he chose 1/16th for the decimals?
@brandonrodriguez6151
5 жыл бұрын
Thank you
@tradestutor1191
5 жыл бұрын
I'm glad you liked it
@QUINPANO
3 жыл бұрын
Why was 1/16 chosen in this scenario
@tradestutor1191
3 жыл бұрын
The only reason that 1/16 was chosen was that is what we usually put our fractions into when doing examples in the trades. You could have made it into 1/8, 1/4 or even 1/32 if you wanted to.
@mikepowell1708
3 жыл бұрын
This is great, but I bought a tape that's in inches and 10ths
@bigbird4481
2 жыл бұрын
Most tape measures will have inches on one side and centimeters on the other, at least in America
Пікірлер: 80