So you're not missing a caliper spring clip, came here cause I thought mine had fell out or something at some point but see you also only have the 1 😂😂😂
@motocyclesandstuff3138
5 жыл бұрын
Thanks for this upload I’m going to attempt this tomorrow on my yzf r125
@davesharratt
5 жыл бұрын
No problem, before you have both pads fitted to caliper ensure that the piston is back to give maximum gap to get it back over the rotor/disk ,I sometimes fold a bit of card and put it between the pads ,it keeps everything in place and once you have pads over the disk simply pull out the card .just a thought nite be of some use to you or anyone looking into it off to work on my MT07 in a bit ! Ride safe ppl.
@motocyclesandstuff3138
5 жыл бұрын
dave sharratt how would you clean the pistons ? Thanks for the help man.
@davesharratt
5 жыл бұрын
@@motocyclesandstuff3138 hi there get a can of brake cleaner from car spares shop ,being careful not to pop out the piston gently apply brake pressure to ease the pistons out a few mm at a time then you can get to clean the dirty part of the piston ,use a soft rag to clean round the pistons , actually ive several soft toothbrushes i use for getting the crap off my brakes .once clean using even pressure you should be able to ease the pistons back in prior to fitting the pads to aid refitting over the disk .. hope this helps DAVE
@motocyclesandstuff3138
5 жыл бұрын
dave sharratt cheers Dave , I didn’t manage to do the break today probably going to be on Sunday now, thanks for the advice if I get stuck Sunday I’ll be commenting here 👌🏻😂 Cheers Dave
@davesharratt
5 жыл бұрын
Well I'll be stripping forks out if my son's CBR 650f he's blown the fork seals so have fun .dave
@janzuketran
7 жыл бұрын
What pads did you buy (I also have the brembo front brake) ?
@davesharratt
7 жыл бұрын
just the standard pads i got from yamaha dealers near me ...
@domjf6
4 жыл бұрын
One of my pistons seem to be completely stuck, any ideas?
@davesharratt
4 жыл бұрын
If it doesn't move you might invest in a piston puller ! The other option is rebuild brake with out the pads and put a piece of wood over the piston that does move,so when you apply the brake it will hopefully move the stuck piston ,be aware it could come out with some force .. dave
@davesharratt
4 жыл бұрын
did you get the piston free ???
@NikodemasPleska
5 жыл бұрын
What could be the problem, I cant put the pins back on the end of the bolt it seems like it doesn’t go as far in so the pin hole is hidden.
Пікірлер: 20