00:00 Intro 00:21 Example Project 01:36 Project timebase: Beats (position, length, rate) 02:47 Track timebase: Time 03:47 Result 05:06 Beats (position only) 07:21 Summary 08:00 Outro
@REAPERMania
2 жыл бұрын
Thanks!!
@drericfritz
Жыл бұрын
What I love about Reaper is that whenever I have a situation, Kenny's always here to help!
@quelocoel
Жыл бұрын
But you're not actually changing the track tempo, you are changing the entire project tempo and it affects the tracks in different ways. I need a way to set a specific tempo to each track so the delays of the different effects have different tempos :(
@KiLLJOY1056
3 ай бұрын
You would just change the timing on the delay effect, not the timing of the track itself. If youre tracks arent the same tempo then they wont be quantized.
@starthistlelounge3884
2 жыл бұрын
Thanks Kenny. Time/tempo is one of my biggest challenges in Reaper. This video is a great example of the different modes.
@jenskrgaardlarsen9572
2 жыл бұрын
I think you are Superman in reaper! Thanks for all the good stuff you deliver.
@REAPERMania
2 жыл бұрын
Wow, thanks!
@joshjohnson3938
2 жыл бұрын
Was quite literally in thought of this issue when the notification popped up for this vid
@gr3951
2 жыл бұрын
This is Kenny's superpower, the ability to create tutorial video on some topic right after you thought about it ))
@ARE_YOU_SICK_OF_YT_CENSORSHIP
2 жыл бұрын
@@gr3951 it's Google's intrusive algorithms
@gr3951
2 жыл бұрын
@@ARE_YOU_SICK_OF_YT_CENSORSHIP I don't think that Google can force Kenny to create tutorial exactly on topic that currently is on my mind ))
@ARE_YOU_SICK_OF_YT_CENSORSHIP
2 жыл бұрын
@@gr3951 but it can force you to find one if it exists
@gr3951
2 жыл бұрын
@@ARE_YOU_SICK_OF_YT_CENSORSHIP We are talking about NEW videos on channel. I receive notifications about new videos because of subscription, not because of "smart" google algorithms. So I suppose it is Kenny's superpower to guess my problem just several minutes after I face it ))
@kevincalson6760
Жыл бұрын
Never noticed the Tempo/Time signature bar above the Measure/Time counter until I watched this video. Fixed my issue right there!! Thanks Kenny!
@harrisfrankou2368
2 жыл бұрын
My takeaway from this is that I have many Marvel and DC comics. Another winner Champ.
@jimbeaux4988
2 жыл бұрын
This clears up some terminology for me. I intuitively figure this out when I need it but this explains what is going on.
@okaynice_
2 ай бұрын
This literally saved my life. Thank you.
@mageprometheus
2 жыл бұрын
Holy cow, Kenny or Reaper man. Are you super today?
@ManasahGriot
8 ай бұрын
You are the best Kenny!
@morenogomes6858
4 ай бұрын
Wow, awesome!
@mmr1483
Жыл бұрын
cool, but how can i change individually tracks tempo without change project settings? or not possible?
@quelocoel
Жыл бұрын
Same question here
@banterbanter
2 жыл бұрын
Thanks Kenny 🔥🍰💖
@EastOfGreenwich
3 ай бұрын
Thank you.
@ulfsvensson9710
2 жыл бұрын
That can become very handy!!
@deeskushun
2 жыл бұрын
super useful thanks kenny
@timestamplease
5 ай бұрын
Thanks again
@konoplevvv
Жыл бұрын
Many Thanks, Kenny! Great you and great your channel!
@grobinson9352
2 жыл бұрын
This was quite interesting thank you
@KiLLJOY1056
3 ай бұрын
I dont think Reaper couldve made this any more complicated and convoluted.
@joshuatorresnarvaez8765
Жыл бұрын
pure content gold my friend
@paulb8340
Жыл бұрын
nice one perfect solution !!!!drumms argggggh
@Halfstar3
6 ай бұрын
Let's say you wanted to slow down/speed up an entire song by a few bpm, does this effect the quality of the recorded material at all?
@elementor85
2 жыл бұрын
I thought this was going to be about how to tempo match to music tracks, for example if a music track plays at 120 BPM and I want to pair it with a voice track at 128 bpm. Do you have any tutorial showing that process? Anyway I didn't know that you could edit the audio from a video on reaper! Thanks for this tutorial.
@nibblrrr7124
2 жыл бұрын
Check out *Finding the Song Tempo* and *Matching an Audio Performance to a Tempo/Click.* Basically, if you have two REAPER projects where the clips match the click, you copy & paste from one into the other, and it should just work - assuming you left the timebase at the default "Beats (position, length, rate)". Make sure the clip starts cleanly at a whole beat (or better, a downbeat / "one" of a measure) so you can easily snap it into the correct position in the other project. For short parts, you could also hand-adjust a clip's tempo by holding Alt & dragging its left or right edge. Hold Shift as well for finer adjustments.
@HossainPanthoOfficial
10 ай бұрын
finally its you man awesome!
@maboya
Жыл бұрын
what if I want to change the tempo of a specific track but not the tempo of the project? I have one track that has a tempo of 80bpm and another that is 90, I want to squeeze the 90 bpm track to 80bpm
@keithbrand6815
Ай бұрын
...and what if we want to change the tempo in the middle of the song? Do we have to create new tracks and change their timebase settings and play from there? Or is there a way to "split" the track into different tempos..just wondering!
@NickFromNetherlands
2 жыл бұрын
Analyse tempo is auto in CuBase and Logicx. Can import the tempo in Reaper.
@SKDrumming
2 жыл бұрын
Excellent Kenny .... keep it going :)
@TheTimeProphet
6 ай бұрын
I didn't know reaper could do video.
@robertcarolinar
Жыл бұрын
Thank you for this!!
@eddiepersa1752
8 ай бұрын
I set a midi track timebase to time and when I change tempo inserting a change of tempo the midi track is changed, didn't work.
@OSLiveTV
Жыл бұрын
Love all the tutorials Kenny! But, this is not working for me. Not sure why. I have gone through the video amd changed all my setting to mirror what you've done. What I want to to is have EZ drummer on one track, record guitar on another and have them at the same tempo. Then go to two more tracks and do the same thing but at a different tempo. Both in the same project. But, when I change the tempo it still chamges it for the entire project. What am I missing?
@matthewflowers1079
Жыл бұрын
Thank you so much!
@ryansevernpiano
Жыл бұрын
i need to change the tempo of different midi tracks for time changes this did not work
@hazielrendon3805
Жыл бұрын
I have the same problem
@kevinhughes6707
Жыл бұрын
Once you have your measures mapped to your audio by adding and manipulating tempo points, how do you then remove all tempo points so the audio plays back at one tempo, while keeping the measures lined up?
@crambone4188
Жыл бұрын
Hi. Silly question: how would I change the number of items per se in an individual track to match up them up “better” with the length of that of another track?? For instance, an item on one track is at 3.5 seconds total while there’s six items total at .7 seconds each on another and I would like to change that number of items to five if possible?? Thanks
@chudyziomek
Жыл бұрын
THX BRO
@adelhishem1
Жыл бұрын
Great video as always, thanks a ton for sharing
@canastraroyal
10 ай бұрын
Hi there, Kenny! Is there a way to have a different tempo automation envelope for each track in the same project, simultaneously?
@ohokiwi493
14 күн бұрын
i dropped a track and recently in reaper and it gave me an option to choice its recommended bpm or add my own .never seen it again since then .. how do i tick the box for this chosen option or best how can i see this again its a great guide line some one will know ? but will they help ? Warmly j not a sausage about this online yet some guy possible slaved hours to write the code ... :( lets use it
@Mikahaan
Жыл бұрын
Great tutorial. Thank you. What movie does the video clip come from, it looks interesting. Thanks again.
@REAPERMania
Жыл бұрын
It's an amazing movie - kzitem.info/news/bejne/qpWZq6OBap-JoKg
@timleghorn157
Жыл бұрын
thanks, but how to keep your markers in place with the time based track (the vid track)?
@mamandapanda185
2 жыл бұрын
I wish this worked! I've a voice over track on the master, and the edits for it in tracks below. Following instructions here, everything but the master changes. Project settings are beats; track timebase for the master is time. One day I won't have to use Audacity to change tempo for voice overs!
@REAPERMania
2 жыл бұрын
If you mean "folder" then you need to change all the "child" tracks you want to change as well.
@mamandapanda185
2 жыл бұрын
@@REAPERMania Thank you, but I'm just trying to change the tempo of the master track. That's usually what we work with in voice overs.
@diarrheapool
Жыл бұрын
bro, you take forever to say some things, and at the same time you leave out information. nice work.
@altizeraudio
Жыл бұрын
What is this clip from? Love this video by the way!
@djabthrash
11 ай бұрын
Video is from Kill Bill (#3 ?).
@paladin.strait
Жыл бұрын
thank very much friend! i can noe make super cool adhd skizo music at 799 bpmm
@johannessens6018
2 жыл бұрын
cool!
@bozhidarpopov
Жыл бұрын
Great video! I have a question - how can I render an audio file, so that both intro and main part perfectly align to the click, when placed on a separate tab? I've used tempo mapping and my intro is at 110 bpm and the rest at 140 bpm, so when I play the whole audio with the click - it matches perfectly, but when I render it and paste the same separate stems on a separate tab - only the intro matches with the click but the rest - not, can someone help me with this ? Many thanks in advance!
@ButWhyMe...
7 ай бұрын
did you ever figure it out?
@persiaguitar
2 жыл бұрын
I need to speed up the playback speed in youtube :)
@MildredStain
2 жыл бұрын
You do know you can do this, right?
@persiaguitar
2 жыл бұрын
@@MildredStain :)
@flippyjunior1267
11 ай бұрын
kill bill xD
@crambone4188
Жыл бұрын
Hi. Silly question: how would I change the number of items per se in an individual track to match up them up “better” with the length of that of another track?? For instance, an item on one track is at 3.5 seconds total while there’s six items total at .7 seconds each on another and I would like to change that number of items to five if possible?? Thanks
Пікірлер: 73