The amount of different ways to achieve the same thing in blend is absolutely insane.
@toututu2993
Ай бұрын
So simpler shape is the best way to start. That's a nice tip there
@foreign_objective2855
2 ай бұрын
Why have I only seen this now? 😭😍
@mdsdesignOFFICIAL
2 ай бұрын
@@foreign_objective2855 🤨🙃
@Crazyaj13
8 ай бұрын
Song
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@thatcommentissosus
Жыл бұрын
As a beginner, I cant wait to also do this.
@mdsdesignOFFICIAL
Жыл бұрын
best wishes to you...tnx for comment.
@Justacommentorian
Жыл бұрын
Me too, how’s ur progress coming along? Any tutorials u recommend?
@mdsdesignOFFICIAL
Жыл бұрын
@@Justacommentorian I watched a lot of several tutorials. when I start anything in a blender then if I have no idea then search and watched. thank you I hope I make you understand.
@mdsdesignOFFICIAL
Жыл бұрын
yes. you make me understand. you imagine & write down step by step then you start modeling or something. i hope it's help you lot. tnx for the comment.
@mdsdesignOFFICIAL
10 ай бұрын
@@Sailz_I'm learn from videos. thanks for the comment.
@chaisekillerfairytailamvs9739
Жыл бұрын
I never thought to use the knife setting to make eyes that’s way easier then what I’ve been doing I’ve been just adding circles😂
@lonelyberg1808
7 ай бұрын
But I was wondering. How do you do if you use the knife tool ? Because it creates triangle. Are triangles a problem in that situation?
@mdsdesignOFFICIAL
7 ай бұрын
@chaisekillerfairytailamvs9739 please watch this video:
@mdsdesignOFFICIAL
7 ай бұрын
@@lonelyberg1808 please watch this video kzitem.info/news/bejne/zIee2XqKqKeElmU
@lonelyberg1808
7 ай бұрын
@@mdsdesignOFFICIAL thanks
@mdsdesignOFFICIAL
7 ай бұрын
@@lonelyberg1808 my pleasure.
@rishikeshacharya4961
Жыл бұрын
I am a pro , at this but this technique may be better than sculptuing mistakes and add a fine detail in base structure ... Good one 😀
@mdsdesignOFFICIAL
Жыл бұрын
thanks for your valuable comment.best wishes for you..
@lonelyberg1808
7 ай бұрын
How do you do with triangles when you use the knife tool for this technique?
@mdsdesignOFFICIAL
7 ай бұрын
@rishikeshacharya4961 please watch this video kzitem.info/news/bejne/zIee2XqKqKeElmU
@_rio_2965
Жыл бұрын
Ah yes. Time to watch this short over and over untill i make my character. Poggers
@mdsdesignOFFICIAL
Жыл бұрын
Best wishes for you & thanks for the comment.
@mdsdesignOFFICIAL
7 ай бұрын
@_rio_2965 please watch this video kzitem.info/news/bejne/zIee2XqKqKeElmU
@_rio_2965
7 ай бұрын
@@mdsdesignOFFICIAL Thank you!!!! You are the greatest! Has anyone told you that? You are super duper great. Yeah!
@bruhnah4life
Жыл бұрын
Woah, i never see this method, i guess i'll try, looks more easy than linking vertices one by one
@mdsdesignOFFICIAL
Жыл бұрын
thanks for the comment. please try this one.
@bruhnah4life
Жыл бұрын
@@mdsdesignOFFICIAL btw what do you use when shaping the head? The line is like flattened like beveled
@mdsdesignOFFICIAL
Жыл бұрын
@@bruhnah4life its not beveled. i just change position.use shadow & cavity (both)
@mdsdesignOFFICIAL
7 ай бұрын
@bruhnah4life please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@PaxTheCat
5 ай бұрын
Isn't knife Tool making the topology kinda weirder
@dirtbags-R-Us
4 ай бұрын
Fucking thank you I've been looking for shit exactly like this
@everydayabstract5270
Ай бұрын
That’s pretty smart: knife tool your way to quaded geometry ✅
@EgonDogo-gs1re
Ай бұрын
The right way is too use subdivision surface modifier
@ang1005
2 ай бұрын
how do you make the borders of the figures look like that?
@Stebingee
2 ай бұрын
can u make a slowed down version plz?
@MrKrabs69
11 ай бұрын
Very good tutorial, easy to follow.
@mdsdesignOFFICIAL
11 ай бұрын
Thank you.
@mdsdesignOFFICIAL
7 ай бұрын
@MrKrabs69 please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@wackatonic
4 ай бұрын
Maurice
@StarTheGalacticFox
Жыл бұрын
what's the music?
@mdsdesignOFFICIAL
Жыл бұрын
Download from KZitem music libery. Right now I lost the music details.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@AmostradinGame
3 ай бұрын
Toda vez que uso o "K" fica preso 😅
@vavangamer
10 ай бұрын
How to make Maurice tutorial🗿
@mdsdesignOFFICIAL
10 ай бұрын
Bro i didn’t make yet.thanks for the comment.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@Liberator-vl4zm
5 ай бұрын
got all that written down, well mostly (this was really fast but helpful)
@itselliexoxx
2 ай бұрын
Triangles🫠
@LordPuzzler-9xg
Жыл бұрын
still waiting for part 2
@mdsdesignOFFICIAL
Жыл бұрын
kzitem.infok4uqubuzgkA please watching this video..
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@Mr.necker
2 ай бұрын
MAURICE
@shivkumaribundela7712
Жыл бұрын
How many triangles/vertices does this have ?
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@kek621k
Жыл бұрын
That isnt a very good way of making faces in my opinion but pretty cool i guess
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@lubi.e
5 ай бұрын
Is there a full video that isnt sped up?
@mdsdesignOFFICIAL
5 ай бұрын
please check this one : kzitem.info/news/bejne/zIee2XqKqKeElmU
@chronophobia
Жыл бұрын
Can you plase tell me the song? And good video!
@mdsdesignOFFICIAL
Жыл бұрын
thanks for the comment. right now I don't know. I'll tell you later.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@levidarling5107
7 ай бұрын
If I can pause this at precisely the right time to know what functions to engage, I will rock this no doubt.
@mdsdesignOFFICIAL
7 ай бұрын
thanks for the comment.
@mdsdesignOFFICIAL
7 ай бұрын
@alexthemovie2915 yes.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@vanx1398
Ай бұрын
To fastt i cant see
@mdsdesignOFFICIAL
Ай бұрын
@@vanx1398 Please watch this video. kzitem.info/news/bejne/zIee2XqKqKeElmU
@emberjaxx585
9 ай бұрын
I’ve never seen anyone do this cut method before, interesting
@mdsdesignOFFICIAL
9 ай бұрын
thanks for the comment.
@emberjaxx585
9 ай бұрын
@@mdsdesignOFFICIAL I just used it on the person I’m modeling, worked quite well so far
@mdsdesignOFFICIAL
9 ай бұрын
@@emberjaxx585 best wishes for you.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@see2remember
3 ай бұрын
Im trying to make facial expressions. And the ways ive seen in the internet apparently i can make "bones" on the faces to make articulations , but when i move the bones to actually make movement it breaks
@mdsdesignOFFICIAL
3 ай бұрын
try properly maybe some bones are disconnected to each other.
@see2remember
3 ай бұрын
@mdsdesignOFFICIAL ok ... ill try again
@TVheadDev
7 ай бұрын
Is It riggable?
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@aether3730
11 ай бұрын
Goofy ahh topology
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@franthestar
Жыл бұрын
hi, I didn't get it the part that the cut tool get simetrical (wich key was used) (sorry I don't no exactly how to slow down the video) if anybody knows the answer...
@mdsdesignOFFICIAL
Жыл бұрын
Go to edit mood & Crtl+R, loop tool. Sometimes the "K" knife tool is cut. Thanks for the comment.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@sajid2272
Жыл бұрын
ENDGONNNEE NAAHH
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@Wladyslaw1440
11 ай бұрын
Honestly, as someone who is new to blender who might understand this someday, its too complicated for my small sized brain
@mdsdesignOFFICIAL
11 ай бұрын
No need to worry.thanks for the comment.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@abyss_079
Жыл бұрын
What about character with wrinkles and details that isn't possible in modelling but is possible in sculpting ?? Just curious
@mdsdesignOFFICIAL
Жыл бұрын
i have no correct answer for your question. i think sculpting difficult for me. tnx for comment.
@abyss_079
Жыл бұрын
@@mdsdesignOFFICIAL no I actually meant can we make wrinkles in modeling
@mdsdesignOFFICIAL
Жыл бұрын
@@abyss_079 of course, we can.
@spamme.
Жыл бұрын
@@abyss_079 yes, but it's much harder.
@jumpy2783
Жыл бұрын
@@abyss_079 If you want to model a low poly character with wrinkles, stop there. That’s too much detail for too little geometry. You can make a detailed character with wrinkles, but honestly, there’s no point in using modeling to do that since it’s just too hard to work with.
@calebcrow_
Жыл бұрын
Post the full length version 🙏 Would love to see more of how the technique works
@mdsdesignOFFICIAL
11 ай бұрын
thanks for the comment.ok i will try to make full video.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@philliirvin2402
7 ай бұрын
Was this your workflow from the start in modeling face blender? If not what were you doing before?
@mdsdesignOFFICIAL
7 ай бұрын
this one easy way for me. before I didn't make face easily.thank you.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@philliirvin2402
7 ай бұрын
thank u, i will! @@mdsdesignOFFICIAL
@Feli2009pe
Жыл бұрын
Part2?
@mdsdesignOFFICIAL
Жыл бұрын
part-02 are available please search same title just 01 instead 02.thank you.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@Feli2009pe
7 ай бұрын
@@mdsdesignOFFICIAL thanks, but i already learned on my own, still good tutorial
@mdsdesignOFFICIAL
7 ай бұрын
@@Feli2009pe great to hear that.
@thalarankthorn-w-
11 ай бұрын
Maurice ultrakill vibes
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@eliodonvito9252
10 ай бұрын
What’s the beat bro
@mdsdesignOFFICIAL
10 ай бұрын
Music from KZitem music library. right now name of the song. i just forget. sorry for that.
@blackclover3417
9 ай бұрын
Bro i can also strt blander if my drawing skills are not good??
@mdsdesignOFFICIAL
9 ай бұрын
don't worry.no need to drawing skill. you can use reference pictures from online. little drawing skill also helpful. thanks for the comment.best wishes for you.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@beantoad2838
10 ай бұрын
Yo you heard about sculpting?
@mdsdesignOFFICIAL
10 ай бұрын
yes...
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@beantoad2838
7 ай бұрын
@@mdsdesignOFFICIAL Okay
@juanescamilla7790
9 ай бұрын
Not me watching this video while i'm waiting for my pc to arrive
@Blazer1080
8 ай бұрын
It arrived?
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@LeonelReyes-sl6ew
Жыл бұрын
How do you use the draw pen to draw vertices when I’m done I can’t change it what do I click?
@mdsdesignOFFICIAL
Жыл бұрын
when you finished draw. you just press enter. i hope you get solution. thank you.
@LeonelReyes-sl6ew
Жыл бұрын
@@mdsdesignOFFICIAL oh thanks I really needed this thank you
@mdsdesignOFFICIAL
Жыл бұрын
@@LeonelReyes-sl6ew my pleasure bro.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@ls4u
Жыл бұрын
literally the easiest technique to do it like bruh i made a head in 10 seconds
@mdsdesignOFFICIAL
Жыл бұрын
Thanks for the comment.
@Mikel726
8 ай бұрын
How do you get those white outlines on the faces?
@mdsdesignOFFICIAL
8 ай бұрын
go "shading" beside of rendered view. active "cavity" type "both". tnx for the comment.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@anhsao2711
8 ай бұрын
Where can i find part 2 of this 🥹 thank you
@mdsdesignOFFICIAL
8 ай бұрын
kzitem.infok4uqubuzgkA?si=wF_zW0qaCQzl908h
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@RusselRakshan
10 ай бұрын
Bro how you got the knife tool ...?
@mdsdesignOFFICIAL
10 ай бұрын
Press "K" for knife tool. after drag press "enter" key.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@wargamer2190
Жыл бұрын
Is that remixed project zombiod music
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@wargamer2190
7 ай бұрын
@@mdsdesignOFFICIAL I don’t even remember what I was talking about lol
@J.cabinet171
4 ай бұрын
This music is from kenshi?
@mdsdesignOFFICIAL
4 ай бұрын
From KZitem...
@ladybugbee
4 ай бұрын
even though this is from youtube, kenshi has good ost
@jacobmartincontreras
Жыл бұрын
Looks good. The topology is questionable though
@mdsdesignOFFICIAL
Жыл бұрын
thanks for the comment. topology have no problem.you may try.
@acefisherman913
Жыл бұрын
You mean the n-gon by the brow? I noticed that too. Bad topology.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@devryu9280
10 ай бұрын
bro must be fastest 3d modeler ever
@mdsdesignOFFICIAL
10 ай бұрын
Thanks for the comment.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@TaMereLArtichaut
11 ай бұрын
How do you add the mirroring between the right and left part ?
@mdsdesignOFFICIAL
11 ай бұрын
Go to the mirror modifier & set your axix. Thanks for the comment.
@TaMereLArtichaut
11 ай бұрын
@@mdsdesignOFFICIAL omg thank you sm
@mdsdesignOFFICIAL
10 ай бұрын
@@TaMereLArtichaut my pleasure.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@bird2145
7 ай бұрын
00:01
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@nerdfloppa-xi7my
7 ай бұрын
0:00
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@AndrésRepiso04
7 ай бұрын
0:23
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@nullvoid4193
10 ай бұрын
0:00
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@Time_to_take_these_edits
10 ай бұрын
Bro to fast
@mdsdesignOFFICIAL
10 ай бұрын
play slow bro.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@jumpy2783
Жыл бұрын
Good thing you didn’t just subdivide it after all that work in low poly 😂. Too many people do this but it’s far easier to just start with a high poly object and sculpt it from there.
@mdsdesignOFFICIAL
Жыл бұрын
thanks for your compliment.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@Ray_not
3 ай бұрын
I'm doing this right now. So far so good, manage to reach full body in the end
@reniside4357
11 ай бұрын
The is amazing, I always thought sculpting was for living things except trees though
@mdsdesignOFFICIAL
11 ай бұрын
thanks for the comment.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@reniside4357
7 ай бұрын
Thank you so much, Good Bless you bro 🙏
@mdsdesignOFFICIAL
7 ай бұрын
@@reniside4357 my pleasure bro.
@MR.Fantanny
8 ай бұрын
this was actually usefull and short
@mdsdesignOFFICIAL
8 ай бұрын
yes .thanks for the comment.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@shaneseem-sin3856
4 ай бұрын
Telling that blender cube to lock in
@NormIy
4 ай бұрын
Avoid making ngons
@UmethInduwara-ss7dk
3 ай бұрын
U made it look easier though 😮
@Dahrabnum
Жыл бұрын
IT WAS SO FAST I DIDNT UNDERSTAND NOTHING
@mdsdesignOFFICIAL
Жыл бұрын
I will try to make a slow tutorial. tnx for the comment.
@Dahrabnum
Жыл бұрын
@@mdsdesignOFFICIAL no problem
@mdsdesignOFFICIAL
Жыл бұрын
@@Dahrabnum 🙂
@Dahrabnum
Жыл бұрын
@@mdsdesignOFFICIAL can you make a tutorial humman model for begginers it will help a lot.
@mdsdesignOFFICIAL
Жыл бұрын
@@Dahrabnum i already make but you have any example please share with me.
@MaxxYT-YouTube
6 ай бұрын
Ah yes for beginners, in a shorts.
@gexenterthegecko252
Жыл бұрын
you make it look so easy bro
@mdsdesignOFFICIAL
Жыл бұрын
yes brother.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@ukrainetoday960
Ай бұрын
Awesome
@mdsdesignOFFICIAL
Ай бұрын
@@ukrainetoday960 thanks
@sifidol6307
Жыл бұрын
Я в блендере уже где-то пол года, моделировал до этого только маленькие неживие модели, но вот это очень круто, в ближайшем времени обязательно научусь делать подобное
@mdsdesignOFFICIAL
Жыл бұрын
Я так рад твоему комментарию. этот тип комментариев вдохновляет меня. наилучшие пожелания вам.спасибо.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@Shahuang
Жыл бұрын
Why are you didn’t use sculpting and brushes
@mdsdesignOFFICIAL
Жыл бұрын
thanks for the comment.I have no clear answer right now.
@julianrobertson1869
Жыл бұрын
Cause why not? Personally I prefer to skip the skulpting and go straight to the topology, as trying to decimate a skulpt or doing retopolgy I find a waste of time. But I do see the merits of skulpting if you don't care about time.
@Shahuang
Жыл бұрын
Btw, nice ! Also you cold watch my modeling in blender at the KZitem channel of mine, thanks
@mdsdesignOFFICIAL
Жыл бұрын
@@julianrobertson1869 thanks for the valuable comment. your thinking is too good. I agree with you.
@mdsdesignOFFICIAL
Жыл бұрын
@@Shahuang thanks for the comment. I will watch your modeling.
@Uuser0
7 ай бұрын
Hi can ı use your video to my project
@mdsdesignOFFICIAL
7 ай бұрын
Which project bro?
@Uuser0
6 ай бұрын
@@mdsdesignOFFICIAL sorry ı forgot to answer and ı didnt wait for your answer. It was for First Lego League ı used to make a video about 3d design
@Uuser0
6 ай бұрын
@@mdsdesignOFFICIAL sorry again and thank you for the video
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@rollinheights1992
Жыл бұрын
CAN ANYONE TELL ME WHERE'S THAT PENCIL TOOL?? I'M SEARCHING THAT FOR YEARS..
@mdsdesignOFFICIAL
Жыл бұрын
You talking about knife tools? Just pressing K and drag.when finished just prees enter.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@un_sir_qui_aime_du_rock
9 ай бұрын
edit. after thinking a bit, this is 1 method of doing it. I prefer just modeling and sculpting, but let's see how I see things as I do it.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@miloskaluznik48
Жыл бұрын
The ngons...THE NGONS!
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@Miyasukee
4 ай бұрын
Wow this is Helpful thanks
@mdsdesignOFFICIAL
4 ай бұрын
my pleasure full video link: kzitem.info/news/bejne/zIee2XqKqKeElmU
@rickandthecomputerscience
Жыл бұрын
Nice work bro 🔥
@mdsdesignOFFICIAL
Жыл бұрын
Thanks a lot, brother...☺
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@BUBBLES_CANDY-7
Жыл бұрын
Hello erm I’m new to sculpting could you make a tutorial cuz I couldn’t se what u pressed
@mdsdesignOFFICIAL
Жыл бұрын
thanks for the comment.i will try to make sculpt tutorial.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@illusionfox1514
Жыл бұрын
nice
@mdsdesignOFFICIAL
Жыл бұрын
Thanks.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@remopellegrino8961
9 ай бұрын
Aren't there too many triangles?
@mdsdesignOFFICIAL
9 ай бұрын
Maybe....
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@Bravo_0-7
10 ай бұрын
what's the name of the music? it's fire
@mdsdesignOFFICIAL
10 ай бұрын
thanks for the comments. sorry bro this moment i don't know but i get this one from KZitem music library.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@용용이-d2j
Жыл бұрын
00:00
@AnonymousXWeirdo
8 ай бұрын
I... must... learrrnnnn
@mdsdesignOFFICIAL
8 ай бұрын
Best wishes for u....
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@kazumaitsuchi469
Жыл бұрын
Why can't I figure out how to access this?
@mdsdesignOFFICIAL
Жыл бұрын
please watch carefully & slowly.if you need any help please let me know.
@kazumaitsuchi469
Жыл бұрын
@@mdsdesignOFFICIAL a lot of the options are off screen, so I can't see what you clicked.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@devanmauch7843
Жыл бұрын
woah- this is cool and I'm gunna try it!
@mdsdesignOFFICIAL
Жыл бұрын
Thank you.plz try...
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@user-un2vb8mr6e
Жыл бұрын
what do you use to draw on subdivisions like that
@mdsdesignOFFICIAL
Жыл бұрын
thanks for the comment. i just use loop cut & knife tool for subdivide.
@user-un2vb8mr6e
Жыл бұрын
@@mdsdesignOFFICIAL thank you, what is the shortcut for knife tool?
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@user-un2vb8mr6e
7 ай бұрын
@@mdsdesignOFFICIAL I've learnt a lot in blender since then thanks though
@yathishguntur24
Жыл бұрын
Good, but too fast
@mdsdesignOFFICIAL
Жыл бұрын
Thanks for the comment.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@finaloutput
Жыл бұрын
Bro, the music 🔥
@mdsdesignOFFICIAL
Жыл бұрын
😊😊
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@plat1num_official
Жыл бұрын
А топологию я исправлять буду?
@mdsdesignOFFICIAL
Жыл бұрын
ok.
@plat1num_official
Жыл бұрын
@@mdsdesignOFFICIAL Ок я исправлю
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@user-vs1mn8ig8w
Жыл бұрын
Weird topology, but it looks good
@mdsdesignOFFICIAL
Жыл бұрын
Thanks for the comment...
@jumpy2783
Жыл бұрын
Not even. Plus, you can change it up later.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@mf5252
Жыл бұрын
Too bad it ended before you finished
@mdsdesignOFFICIAL
Жыл бұрын
This is part-01.part-02 also available. please watch i hope you also like part-02. thanks for the comment.
@mf5252
Жыл бұрын
@@mdsdesignOFFICIAL I think you should have just made it only one part, so that more people can see the whole thing :)
@mdsdesignOFFICIAL
Жыл бұрын
@@mf5252 thanks for your valuable advice. I will try my best in the future. thank you.
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@தனிரகம்
9 ай бұрын
❤🎉
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@m1dday
11 ай бұрын
Nice👍🏻
@mdsdesignOFFICIAL
11 ай бұрын
Thanks
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@sanstheskele-ton
Жыл бұрын
0:01
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@zollokidart
Жыл бұрын
great short !
@mdsdesignOFFICIAL
Жыл бұрын
thank you.....
@mdsdesignOFFICIAL
7 ай бұрын
please watch this video : kzitem.info/news/bejne/zIee2XqKqKeElmU
@sanjibbiswas1140
Жыл бұрын
modelling a face is wrong instead sculpt it
@mdsdesignOFFICIAL
Жыл бұрын
It will not be right to say wrong, it is a kind of method.thanks for the comment.
@jumpy2783
Жыл бұрын
Nope, in regards to low numbers of geometry, Modeling is key. And it looks like he was clearly going for a simple low poly character. Sculpting isn’t a good idea in this case.
Пікірлер: 306