Yes sir, I started this a few years ago. It works great, up is time consuming. I bought a tooth setter through Amazon for about $35. It's easy to set and go.
@leaningcedarcamp3719
6 ай бұрын
I'm going to try this tomorrow. Same machine
@dherman0001
2 жыл бұрын
I trusted you on going with the thicker blades and you were right.
@TheOutdoorsGuy
2 жыл бұрын
Hey I’m glad they worked out for ya
@dherman0001
2 жыл бұрын
@@TheOutdoorsGuy so flat, no planer needed. Crazy!
@JOHNMORIN100
2 жыл бұрын
AWSOME SHIRT PTL
@thesheff79
Жыл бұрын
Just watched your video, no one around me sharpens blades so I'm gonna try your method. If anything I can at least get them sharp enough to can't my logs for later milling.
@TheOutdoorsGuy
Жыл бұрын
It works fine man I cut lumber on mine main thing is don’t overheat that tooth bad
@rogercalza9936
Жыл бұрын
Please forgive me if I am silly but...Blades are made by first cutting the tooth and gullet. That process causes the sharpening of teeth. Then the teeth are set left, right and left center. So the sharpened edges are twisted away from when formed. In contrast,,,,,We sharpen a dull blade with the teeth set. So our sharpened teeth derive a very different (and uniform) cut angle. This does not seem to be what occurred initially during blade formation,. Am I incorrect?
@robertnolan667
3 жыл бұрын
thank you great viedo
@rossconsalvo6792
2 жыл бұрын
Thanks for sharing !
@danthomas7180
2 жыл бұрын
Just did this for the first time today, works like a charm. Then I put a round file in my drill to clean between the teeth. I lost my Dremel I have no idea how I did that.
@JamesJohnson-ee5ij
2 жыл бұрын
Great video, nice job man i just wanted to say hi and best wishes, be well and safe to all.......James
@CaptMike
2 жыл бұрын
Folks, this really works! I took my old Harbor Freight Chainsaw sharpener and the very first blade I did worked like new! Now to try one of those $40 tooth setters offered on Ebay! Thanks.
@spartakmayakovski
Жыл бұрын
Is that smell from grinding poisonous for you?
@CaptMike
Жыл бұрын
@@spartakmayakovski I do it outside and don't really notice any smell. Always use some type of cross ventilitation like a fan if you can.
@spartakmayakovski
Жыл бұрын
@@CaptMike ok thanks
@thurmanturner7399
2 жыл бұрын
thanks this works great
@eitantal726
7 ай бұрын
Tooth setter pliers cost less than $40
@garywenzel4921
Жыл бұрын
Should have shown us the surface of that cut. Love your video though ❤
@crazycoyote1738
2 жыл бұрын
Thanks for sharing your idea, It looks like the blade is rattling during sharpening, and nothing controls the tooth from rolling, you can add a small contraption to make it perfect. God bless!
@wizardind3203
2 жыл бұрын
You can by a tooth setter for a hand saw that works
@Grizzlife
2 жыл бұрын
Hey thanks for info. I’m curious in those guide block mods and where I can get them for the bigger blade. I have the HM 126 as well
@TheOutdoorsGuy
2 жыл бұрын
As far as kids all u gotta do is open the blocks up a little wider even though the blades will stick out in the front a little it doesn’t effect the performance
@Grizzlife
2 жыл бұрын
@@TheOutdoorsGuy Ah gotcha thanks
@jamesgragg9369
Жыл бұрын
What angle is the sharpener set at for the blade
@wildmanworley
Жыл бұрын
Im new to the saw mill//// every three teeth is different. is the cutting angle the same on each tooth???
@TheOutdoorsGuy
Жыл бұрын
Blades are 18$ roughly and u will get around 3 or 4 sharpenings out of each, all angles are the same, teeth are set a little different though one is a little to right other center then other left, but it works trust me don’t overthink it.
@mikemuniak4711
Жыл бұрын
What angle you use
@ironleatherwood1357
3 жыл бұрын
Thanks for the video, where do get your blade's I wasn't able to find that info. I saw your video on the inch and half blade's but can't find where to buy them. Thanks
@TheOutdoorsGuy
3 жыл бұрын
Pipers saw shop u put phone number in description
@ironleatherwood1357
3 жыл бұрын
@@TheOutdoorsGuy just checked out pipers, lots to choose from, what blades are you using? What do you mean by put phone number in description? Thanks I'm learning
@TheOutdoorsGuy
3 жыл бұрын
Haha I got the video mixed up it’s on my video about using bigger blades I put the info about pipers I’m sorry about that! I use woodmizer turbo7 they are bigger than recommended for ur sawmill and regular blades I like Simmons
@ironleatherwood1357
3 жыл бұрын
@@TheOutdoorsGuy thanks
@jasonc6962
2 жыл бұрын
Where do you send your blades for resharp and setting?
@peterschwendinger1435
3 жыл бұрын
Nice. What angles are you setting on the sharpener.?
@russr
2 жыл бұрын
0 on the bottom guide
@raylivick1996
2 жыл бұрын
What angle did you set the grinder
@user-uk1zi2zq7v
3 ай бұрын
Somthing between -3 and +3 degree.Every tooth have diferent hook angle.
@joseluismanriquez2343
2 жыл бұрын
Ey man inet 1 hellme
@sergeystrizheus3368
2 ай бұрын
Its very on consistent i don't believe it's going to work good. Seems to me you can ruined blade so easily, not worth it
@TheOutdoorsGuy
2 ай бұрын
I use it and it works for me that’s all I can say. Difference of opinion is alright.
@Lawiah0
2 жыл бұрын
The Magnificent Adamic-man, the Christian Race ... Cush (Greek: Ethiopia), means sun-burnt face Phoenicians described by the Greeks, as fair-haired, fair-skinned people Persia means Lord of the Aryans now renamed IRAN ... 12 Tribes passed through the Caucasus Mountains (i)ssac's Sons / Saxons / Anglo-Saxons / Europe / Australia / New Zealand / North America / Christian First World / "We the People" ... 38 For as in those days before the flood, *they were eating and drinking, marrying and giving in marriage,* until the day when Noah entered the ark, 39 and they were unaware until the flood came and swept them all away, *so will be the coming of the Son of Man.*
@robertdillon9989
Жыл бұрын
Good grief ……
@Lawiah0
Жыл бұрын
@@robertdillon9989 The whore (the Christian Race) rides the Beast and the Beast eats her flesh.
@kevinrecoskie519
Жыл бұрын
Your taking the hook angle off.
@peropopara
Жыл бұрын
You grinding wrong part of blade.Wrong way giving wrong result.You change hook angle from 10 degree to -1 to +1 degree.
@billmaclellan1282
10 ай бұрын
I can appreciate that you want to save some money and sharpen your blades yourself. But you are ruining your blades for your resharpen service. They are not going to want to sharpen those because the profile is now changed. Do yourself a favor and purchase a inexpensive blade sharpener instead. Sorry not trying to disrespect your video.
@TheOutdoorsGuy
10 ай бұрын
I got ya buddy and I appreciate the criticism but I’ve used it for this many years and it cuts good and still get the same life out of the blade regardless if I send them to get sharpened or do it my self
Пікірлер: 49