So this is how you run an aftermarket watercooling kit on em.
@AJRestoration
Жыл бұрын
Seal the head properly, remove the decompression lever (its not water tight) water is getting into the valves and into the engine. Get a flywheel with the cooling fins ground off ( the water resistance is too much with the cooling fins.) Make sure no water is getting into the valves and it should run fine. also make sure to use gasket sealant on the exhaust and intake.
@dieselbossbrandon
Жыл бұрын
I definitely think that was a success. I think it was a fuel issue not water. I give you a A++ thank you for your hard work it was awesome to see! I'd love to see more on this little engine. I just got 2 of them!
@davegeorge7094
2 жыл бұрын
What I like to see. Should be fine, no carb to waterclog. I'd pressurize crank case to be sure oil keeps working.
@josephseymore8560
Жыл бұрын
The problem ight have been the fan and the load to spin the water you can see how the water splashes once the level it's too high ,the load becomes greater than the hp it can handle leading it to stall
@bin_laggin967
2 жыл бұрын
home made hot water heater .....gone wrong lmao
@dirtfootracing8788
2 жыл бұрын
seriously wrong
@turbodog99
8 ай бұрын
TONS of vibration. Maybe air pockets in fuel line due to vibration.
@poolmotorrepairguyFL
2 жыл бұрын
3Hp Diesel (motor). Why plugin your car to charge the battery.. good idea and a Turbo ? and take fan off
@markcwynar6394
Жыл бұрын
That's Amazing, something I would of never thought of. We have to hang out sometime, Neet, thanks!!!
@dieselbossbrandon
Жыл бұрын
If you fix the valve cover with a water hose seal you might have it! Keep trying it's awesome to see!
@davegeorge7094
2 жыл бұрын
Cooling fan take mad power away and forces water injested.
@seymoarsalvage
8 ай бұрын
the fan was removed
@heathenprojects2639
2 жыл бұрын
I bought one of these a few months ago I'm looking at mounting for a mud motor
@alexboucher4938
2 жыл бұрын
I just bought one with the same idea. Let me know how the little diesel performs on the water.
@heathenprojects2639
2 жыл бұрын
@@alexboucher4938 it was a bust I'm new to mud motor and wanted a larger boat that could carry some weight so I'm saving for a larger set up with a 670 predator this little motor is nice I put it on a tiller
@nitroninja7690
2 жыл бұрын
What made it a busy I was thinking about trying to run one on a surface drive
@f40ph88
7 ай бұрын
i think the exhaust should have had an expansion chamber instead of just straight piping
@BVN-TEXAS
7 ай бұрын
Put forced air on the intake to keep it from having that issue.
@jessesodom8594
2 жыл бұрын
Submarine motor
@dadoVRC
Жыл бұрын
The question is:why?"
@douglundy5755
Жыл бұрын
excessive cooling probably killed the ignition point to where it would not fire. Oh yes if it has a crankcase vent you missed putting a snorkel on that opening and sucked water into the oil.
@sour_grapes4280
3 ай бұрын
Deer China, my package arrived with flood damage…
@eloc580
2 жыл бұрын
lol run a belt to a generator head and it can be a water heater and a generator
@matthewbouselli3878
Жыл бұрын
what the hell is the purpose of doing that
@dirtfootracing8788
Жыл бұрын
Since diesel engine are not reliant on ignition systems they are way more “waterproof” - I wanted to see how much it could take. Done just for fun
@sumanmondalsuman7635
2 жыл бұрын
Sir engine flywheel blower fan xta lod engine Stop
@moofusenterprises7503
2 жыл бұрын
Yea he’s right. Sir engine flywheel blower fan xta lod engine stop.
@dirtfootracing8788
2 жыл бұрын
@@moofusenterprises7503 I removed the blower fan
@sumanmondalsuman7635
2 жыл бұрын
Happy new year 💐
@moofusenterprises7503
2 жыл бұрын
@@dirtfootracing8788 I was making a joke about the grammar. I can’t tell if you caught on or not
@dirtfootracing8788
2 жыл бұрын
@@moofusenterprises7503 nah I'm slow :-)
@Tommysmess
2 жыл бұрын
It may work better if the cooling fan was not on the engine
@dirtfootracing8788
2 жыл бұрын
I believe the fan was removed - just the flywheel causing all the splashing
@ivancounsell4077
Жыл бұрын
Ingested water through the crankcase breather, internal combustion engines must have a crankcase breather.
@HaleHunterz
2 жыл бұрын
Yanno, you sound a lot like James Woods haha. Great video!
@motorenbastler9289
Күн бұрын
Didnt work because the engine overheated 🤣🤣🤣
@DktheWelder
2 жыл бұрын
Wow looks harder than I thought! How much power are those motors?
@dirtfootracing8788
2 жыл бұрын
Around 4 hp
@KuntalGhosh
Жыл бұрын
U have to take the cooling fan off or else that will heat 70% of your power trying to circulate all that water 😂
@susanvaughn741
Жыл бұрын
I’d love to see a water jacket around the head and cylinder to make it water cooled!
@gamingwithmr.fregles8802
5 ай бұрын
put a turbo on it
@holdenbrougham1056
5 ай бұрын
Over heated then cracked with cold water , real intelligence , wasted motor
@safetyharborfirearms
5 ай бұрын
Neither of those happens...still runs like it just left chyna
Пікірлер: 50