Just want to play with the pure foil cards. They look so sexy and shiny. Great tutorial! Thanks a lot for that and best wishes from us. 😉 Coop ON! 💚
@scottier5590
Жыл бұрын
Great idea to mirror the images then glue the printed side down!!
@BendtProductions
8 ай бұрын
Ok, First thank you. As an artist I'm excited about the sketch frames on Card Conjurer. Is there a how to video on this? I'd love to get some blanks with frames sent to me!
@gnrlogan1
5 ай бұрын
Do you think the card look really glossy afterwards? I mean, the real mtg cards didn't reflect the light as the transparent paper and that bothered me a little.. of course I was not expecting it to look 100% as the original ones but I think if it were printed on a matte transparent paper it would get a better result but I don't know if there is a non-glossy transparent paper
@dbradford32
2 жыл бұрын
Amazing tutorial. Best I've seen!
@ryanjanis2732
2 жыл бұрын
Awesome tutorial! I know its kind of late but where did you get the clear sheets to print on?
@MissingNovice
2 жыл бұрын
Also late, but I use these: www.amazon.com/gp/product/B092B61GBH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Most overhead projector sheets should work, just make sure you're printing on the correct side so the ink sticks.
@billsmith3042
11 күн бұрын
pro tip: just buy foil inkjet sticker paper and you can print them nine per sheet, just attach the whole sheet to card stock and cu them out. easy.
@TheMoosezor
7 күн бұрын
What are the sizes needed height and width to get the 9cards to fit on the sticker paper, been looking around to find that info but have had no luck
@billsmith3042
7 күн бұрын
@@TheMoosezor I set my margins for the whole sheet to .2 on all four sides. the size of the image needs to be height 3.5 ..when you set the top size, I have found that just by clicking into the size box for width it automatically adjusts the length, but generally that is 2.5. so, 3.5 x 2.5. I put three spaces between each card to make it easier to cut them out, and set the gap beteen lines to 1.12. what I then do is attach the entire sheet to a 270 thickness cardstock, then cut the cards out with sharp scissors. I trim the corners with a 4mm corner punch. to attach it to the cardstock i line up the printed page with the card stock, clamp it, to my desk, peel off and cut away about 1/4 of the sticker backing and let the sticker adhere, then just unclamp and gradually peel and apply the rest of the sheet to the board. easy peasy. I will make a video.
@TheMoosezor
7 күн бұрын
@@billsmith3042 thanks much for the reply that's super helpful
@billsmith3042
7 күн бұрын
@@TheMoosezor i just uploaded a video for my process of what to do after printing the sheet
Hello, The video seems really useful. Do you know wether you use tint or laser printer? Or should it work with both?
@Zorualex
2 жыл бұрын
this is amazing thank you.
@gabrielpecci4662
2 жыл бұрын
mtg cards dimensions you used ?
@Freestylrolla
2 жыл бұрын
Thanks for the video. How do they feel compared to a regular card? I find holo paper stuck to bulk to be way too big (especially if most the deck is proxied). What transparent sheets do you use?.
@MissingNovice
2 жыл бұрын
They certainly are thicker than normal cards. I can feel the difference when I draw one, so you should be mostly using em in a group thats fairly cool with em.
@SirLeuroy
Жыл бұрын
Buy Foil Paper for printing
@thrap1
2 жыл бұрын
what kind of transparent sheets do you use? I tried to print with my laser printer on some transparent folder and it shrinks too much, so I tried to use my ink jet printer but the ink clumps together
@MissingNovice
2 жыл бұрын
Late reply, but I use these: www.amazon.com/gp/product/B092B61GBH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Most overhead projector sheets should work, just make sure you're printing on the correct side so the ink sticks.
@Miirorman
10 ай бұрын
Thank you so much for this! Now I have a fun weekend project while I make fun altered art proxies and wait to see how long it takes my friends to notice 😂
@SoloWing88
2 жыл бұрын
Thank the algorithm as I like this method
@alext.1244
2 жыл бұрын
what is the spray glue product you are using and where did u get it?
@MissingNovice
2 жыл бұрын
Elmers craft glue, and I got it from my local Michaels!
@RiddleRambles
2 жыл бұрын
Can you link the transparent paper you use
@MissingNovice
2 жыл бұрын
Late reply, but I use these: www.amazon.com/gp/product/B092B61GBH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Most overhead projector sheets should work, just make sure you're printing on the correct side so the ink sticks.
Пікірлер: 27