You just earned a subscriber!!! Again, Thank you for the tip. I will share your video to all the Central Texas Jetski Group.
@THEGAFMASTER
3 жыл бұрын
Did this on my 2012 rxp x. Piece of cake and sounds awesome. Thanks for the video. Couldn’t have done it without u.
@yomamasophat2
Жыл бұрын
Hey do you remember the pipe length you used ?
@Ray-pw3yh
10 ай бұрын
Where did you buy the pipe?
@imendez0809
5 жыл бұрын
Thanks for your video I was about to order from their website.
@vonjose888
3 жыл бұрын
Thank you for the info. I was about to order parts from Riva. I have 3 skis. 2016 spark 3up, yamaha suv and 2008 RXP 215 supercharger . I immediately cancelled my order. Thank you thank you for saving me money.
@FLORIDALIFECLIPS
3 жыл бұрын
Right on
@rodelduro6972
4 жыл бұрын
Bro..Well Said...Thanks for helping us save money and learn from you..God bless you......
@whbbill550
4 жыл бұрын
Great, smart video. To see what these companies get for a crappy piece of silicone tubing, a block off, and a trim piece to hold the pipe to the FRIGGING HOLE you just unnecessarily drilled in your hull is ridiculous! Good for you.
@rickwhite3700
4 жыл бұрын
Was looking at Riva wondering how they could cost so much but was going to buy anyways, came to KZitem to look for install videos. Now I'm waiting for parts from eBay to do your way $42
@boostburner
5 жыл бұрын
thanks a lot buddy this video is a really big help and help me save money.
@jorgeortiz8926
4 жыл бұрын
Nice video!!! Would you be able to, instead, bring exhaust pipe straight back and would it make difference vs leaving the way you left it?
@frayby809
4 жыл бұрын
hello, I have Kawasaki 2019, stx 15f, and I want to make it sound louder, the only thing it has its s water box and then it goesd straight to the back. I was wondering can I buy a used waterbox and make it free flow "remove everything from the inside", will this hurt the ski? pls let me know.
@waverider5751
4 жыл бұрын
Anyone know if this changes things with an inverted ski? Does the water box reduce the chances of exhaust water intrusion?
@anthonypapa8676
4 жыл бұрын
what about back pressure????
@badman187ification
4 жыл бұрын
Good info!!!
@SmoothShaft
6 жыл бұрын
What tool did you use to remove the D-Seabel? My box is attached with a black circular top with a small hole in the center. I don’t believe I have any tools to remove this kind of “screw”
@FLORIDALIFECLIPS
6 жыл бұрын
+Brandon Nguyen I just drilled it out and purchased a ribbit set at Harbor freight and putting new one on
@THESICKSILVERADO
3 жыл бұрын
Will this work for the 2016 gtx 300?
@jeffblanton962
5 жыл бұрын
The above ebay site says it's this: 12 - 2.75" 70MM 90 Degree Aluminium Turbo Intercooler Pipe Tube Tubing L=300MM US. Is this the correct pipe that can be used on RXP X 12. Just making sure as this is great information and tip.
@FLORIDALIFECLIPS
5 жыл бұрын
Please take the measurements yourself and converted into millimeters just to be sure you're ordering the right pipe.
@ristotepp6796
2 жыл бұрын
Hi! Anybody knows what is the correct diameter/size for rxp-x 260 rs as model ? I don't have jetski to measure that at the moment:)
@JuanDiaz-gj2dy
3 жыл бұрын
That box is a pain to take out off my 07 rxp 215 im so stuck can you throw me a idea please?
@huntergarcia4810
Ай бұрын
Where can I get a pipe or what size is it for a 2005 rxp 215
@lilredd43
6 жыл бұрын
i would like to change the exhaust for seadoo speester with the 717/720 motor. Could you steer me in the right direction
@FLORIDALIFECLIPS
6 жыл бұрын
Unfortunately I don't have much experience with the 2 strokes on the exhaust systems.
@CHall-kx7tt
3 жыл бұрын
Did you cut off the end piece of the muffler box and reuse that? I did not have a hose at the lower end that still created a seal into the hull. I'd cut it but want to be sure. Otherwise I dont see how a good seal could be made that if trust. Any help would be greatly appreciated.
@FLORIDALIFECLIPS
3 жыл бұрын
No cutting you should have a silicone pipe coming of the hull
@g.king.
6 жыл бұрын
RIVA is biggest rip-off
@FLORIDALIFECLIPS
6 жыл бұрын
WELL SAID!
@CarolResto
Күн бұрын
For a 2015 Seadoo 155 where can I get it
@gbelmont77
5 жыл бұрын
I have a 2007 Sea-Doo GTI SE 155 , I’ve had since it was new and I’ve found I’m very limited on any upgrades... will this exact pipe work on my sea-doo?
@FLORIDALIFEFUN
5 жыл бұрын
I'm not sure never done a 2007 very easy to do just take a few measurements down convert them into millimeters and order the pipe.
@gbelmont77
5 жыл бұрын
Update, ordered this same pipe on EBay and it fit perfectly on my 07 Sea-Doo GTI 155 SE . Thanks for the helpful vid...
@ericotten3978
6 жыл бұрын
I have a 2013 Seadoo Wake 155.....will this pipe fit that model???
@FLORIDALIFECLIPS
6 жыл бұрын
Yes
@Renman_420
4 жыл бұрын
Hey I have the same ski and want to do the upgrade for some reason can’t find the pipe and you’re link doesn’t come up can you link a new one🙏🏻
@FLORIDALIFECLIPS
4 жыл бұрын
Unfortunately I haven't done is video in a very long time I don't remember the sizing it's very easy to do go to Harbor freight get a measuring tool in millimeters and measure your pipe outside diameter
@Bixby1979
6 жыл бұрын
I have a 2010 sea doo rxp x. Just wondering if I would need a tube 2.75 or 2.5? Seems like alot of people are using 2.5? Thanks for this video I had plan to buy the RIVA kit but after this video NOT a chance! Lol
@FLORIDALIFEFUN
6 жыл бұрын
Bixby1979 2.75 is a better fit link is down below.
@romankurowski7678
6 жыл бұрын
Can this be done for a 2017 gtr x 230
@FLORIDALIFECLIPS
6 жыл бұрын
Yes
@martinadair1210
4 жыл бұрын
Hey Bud. I ordered my pipe. Thanks so much. Have you got any wisdom for intake systems?
@FLORIDALIFECLIPS
4 жыл бұрын
Sure but again I don't have the different kind of skis to make videos on
@martinadair1210
4 жыл бұрын
@@FLORIDALIFECLIPS yes I understand. I have a 2016 gtr 215. What would you use as an intake?
@martinadair1210
4 жыл бұрын
Yes. Ideally I think that AUD$385 is extremely over priced for an intake system. Filter here is roughly $90. I can't see the rest costing $300
@randymueller2349
Жыл бұрын
Link above is DOA, Try searching for: "Pre-Fix 2.75" inch 90 Degree L Bend Universal Aluminum Intercooler Intake" which may be a better fit anyway? Randy AKA randog311
@FLORIDALIFECLIPS
Жыл бұрын
I believe you might have to convert it into millimeters
@nathansuggs9563
Жыл бұрын
Is this the same for a 2012 wake 155?
@FLORIDALIFECLIPS
Жыл бұрын
I am not sure the video was posted a very long time ago
@cristianrivera8800
4 жыл бұрын
This fit on a rxt 300 2020. Any idea???
@FLORIDALIFECLIPS
4 жыл бұрын
Should but not 100% sure
@daltonfarmer7013
5 жыл бұрын
Wil this work on a 2008 rxp 255
@FLORIDALIFECLIPS
5 жыл бұрын
90% sure it will
@miguelramos1684
4 жыл бұрын
Would this work for a 2006 sea doo rxt 215
@FLORIDALIFECLIPS
4 жыл бұрын
Yes
@robertmudrick3820
4 жыл бұрын
Will this work on 2012 seadoo gti 130 se?
@FLORIDALIFECLIPS
4 жыл бұрын
Yes
@LightningXA
4 жыл бұрын
Update, any problems still running
@FLORIDALIFECLIPS
4 жыл бұрын
Yes
@adrianm8476
3 жыл бұрын
Can you make a video of how it sounds
@FLORIDALIFECLIPS
3 жыл бұрын
If it warm up a bit I will.
@carlosberrios1021
4 жыл бұрын
Will this work on a supercharged seedoo?
@FLORIDALIFECLIPS
4 жыл бұрын
It should
@christhejetskilife8884
5 жыл бұрын
Would this fit on a Sea Doo Gtr 230 2019?
@FLORIDALIFECLIPS
5 жыл бұрын
Not a 100% sure but if the set up is the same as you see in the video it should
@christhejetskilife8884
5 жыл бұрын
How you doing? Hope everything ok,, just to give you an update to help your viewers on whoever has a Sea doo GTR 230 2019 and will like to find out if this would work on it,, it definitely will,, unfortunately I had a 10 off Coupon from Riva Racing and bought the Free flow from them for about $135 shipping included but whoever will like to save that money and just follow this steps,, it will work on the GTR 230 2019. TAKE CARE AND HOPE THIS HELP YOUR VIDEO AND YOUR VIEWERS.👍🏾
@alexcousins3607
5 жыл бұрын
Will it work on a ‘17 spark?
@FLORIDALIFECLIPS
5 жыл бұрын
Not this particular set up but yes you can do a spark you just have to do some measurements and look up the turbo piping yourself on eBay
@Jetskijoshi260
3 жыл бұрын
Is there a new Link for this pipe because the actually Link doesn`t work?
@FLORIDALIFECLIPS
3 жыл бұрын
Sorry no new links
@addisonsmith4751
6 жыл бұрын
Does this free flow effect fuel mileage and or engine performance?
@FLORIDALIFECLIPS
6 жыл бұрын
+addison smith It does affect the performance it sounds and performs a 100% better. The gas have no clue because my styles of riding change every time I go out I go to a different Location every time
@addisonsmith4751
6 жыл бұрын
Did you ever do a video of how it sounds?
@michaelgene7344
4 жыл бұрын
Will this work on 2017 spark.ace 90 ho
@FLORIDALIFECLIPS
4 жыл бұрын
No
@michaelgene7344
4 жыл бұрын
@@FLORIDALIFECLIPS thanks
@nicholasandrews6945
4 жыл бұрын
Can this done to a 2019 gtr230?
@FLORIDALIFECLIPS
4 жыл бұрын
Sure you can just gonna have to do some measurements and order the proper piping
@mariusfauru
4 жыл бұрын
Will this fit a 2016 rxp x 300 ?
@FLORIDALIFECLIPS
4 жыл бұрын
No clue never tryed but should be very easy to do
@momentoffaith2735
4 жыл бұрын
2016 RXT X 300 -- will this work
@FLORIDALIFECLIPS
4 жыл бұрын
Don't see why not
@MrBIGJAM88
5 жыл бұрын
What do you do for tuning? Is a tune needed?
@FLORIDALIFECLIPS
5 жыл бұрын
Nothing needs to be done
@guillermoortiz1
3 жыл бұрын
Not true. It changes the mapping of ECU and you loose top end unless re flash is done. I lost boost and I went from 68mph to 59. On supercharged skis mods have to be done.
@kx85isweet
5 жыл бұрын
Will this work on a 2019 gti 155 se
@FLORIDALIFECLIPS
5 жыл бұрын
If the SETUP is the same on the inside it will.
@jellyroll9514
4 жыл бұрын
Captaincashmoneyliquor pretty sure it will fit
@Josemb666
3 жыл бұрын
what is the difference when removing it?
@FLORIDALIFECLIPS
3 жыл бұрын
Sound and bit of Better throttle response
@JoseJimenez-xp2ym
2 жыл бұрын
Can you get a fine with this modification ?
@gabriellatamasi9360
4 жыл бұрын
Hahahahaha I love this gye his exactly rite riva want to charge 120bux for a 300mm length pipe when you can get the same for 20bux screw that
@yomamasophat2
Жыл бұрын
What’s the length of the pipe ? I bought one too long. Cheers on the video saved me a lot of $$$.
@FLORIDALIFECLIPS
Жыл бұрын
I have no clue no longer own the jet ski What I would recommend is just buy a longer one you can always cut off a piece if you have to
@yomamasophat2
Жыл бұрын
@@FLORIDALIFECLIPS I did end up just cutting the pipe I had shorter. I used 4 clamps to hold it on. A lot louder now that’s for sure. Can’t wait to go ride after this cold leaves. Cheers !
@Berti_00
4 жыл бұрын
So is this 70mm or 90mm. Good job bro looks amazing and can't wait to do it now
@FLORIDALIFECLIPS
4 жыл бұрын
Sorry it's been so long ago I'm not sure best way to do it is go to Harbor freight a get a measuring tool they run couple bucks measure it and millimeters inside diameter
@Berti_00
4 жыл бұрын
@@FLORIDALIFECLIPS thanks yah I took the muffler off and measured it was 2.5 inches diameter and 12 inches long. Already ordered one. Thanks for the video can't wait to hear the free flow now.
@marcomwd
4 жыл бұрын
albert buca can u send link ? What u ordered? My box melted and I need to replace mine.
@FLORIDALIFECLIPS
4 жыл бұрын
@@marcomwd Don't understand your question you're supposed to remove the plastic Box and only use your aluminum water Box
@Berti_00
4 жыл бұрын
I'd use a 3 inch as the hoses are larger than 2.5. I put a 2.5 for now but waiting on my 3 inch pipe
@djserafin
2 жыл бұрын
Hello, link don't work anymore
@FLORIDALIFECLIPS
2 жыл бұрын
I totally understand that video was made years back all we have to do is measure your inner diameter of your rubber tubes coming off your exhaust and you go on eBay and look up intercooler piping it's easy as that couple measurements and you have whole setup I apologize I don't have time anymore to do the links to busy these days
@X862go
5 жыл бұрын
Yeah ohhhh shit u love your story yeah what a rip.
@FLORIDALIFECLIPS
5 жыл бұрын
I know right FUCK RIVA RACING
@graciedisciple
5 жыл бұрын
Would this work for a 2017 Seadoo Wake Pro 230. Thanks for the video
@FLORIDALIFECLIPS
5 жыл бұрын
90% sure it was it would
@vinicampos8176
4 жыл бұрын
I have a 2013 sea doo gti can anybody purchased something for that and can send me the link please
@FLORIDALIFECLIPS
4 жыл бұрын
I have not done this mod in year Do some measurements converted into millimeters go on eBay under Turbo inter cooler pipes
@johnkaravellas257
5 жыл бұрын
so i have a 2012 model rxt 260 rs as and am thinking to make the same mod. will i do the same work as you did in the video? take out the box and put a straight pipe?
@FLORIDALIFECLIPS
5 жыл бұрын
Yes
@A10_whisper.
4 жыл бұрын
FLORIDA LIFE CLIPS Would it be safe to do a thru hull exhaust the same way without having to buy the full pipe from riva?
@martinadair1210
4 жыл бұрын
hey mate, do you have a link where i can get that pipe?
@FLORIDALIFECLIPS
4 жыл бұрын
After you do your own measuring converted into millimeters and so on eBay
@martinadair1210
4 жыл бұрын
Thanks. Done. All ordered. How do i get the black box out? I know you said undo the hose clamps and remove the hoses, but there is also a bolt that goes in to the hull. It doesn't have a head for a screw driver or anything. How did you undo that?
@CanecaProductions
4 жыл бұрын
Fuck 10%. Thanks for the video 💪
@invercionesconsalvador
4 жыл бұрын
Where can I find it?
@FLORIDALIFECLIPS
4 жыл бұрын
Ebay
@ernestopadron3807
6 жыл бұрын
How do I take off the black box?
@FLORIDALIFECLIPS
6 жыл бұрын
From the hull?
@johnkurtzrva9677
4 жыл бұрын
Ernesto Padron can we still get pipe I can’t find it anymore?
@Ray-pw3yh
10 ай бұрын
This is a great video where can I buy the pipe
@FLORIDALIFECLIPS
10 ай бұрын
EBay, it's a Turbo intercooler pipe.
@Ray-pw3yh
10 ай бұрын
@@FLORIDALIFECLIPS thanks you saved me money lol
@0303caleb
3 жыл бұрын
Anyone have a link where can purchase 90°
@FLORIDALIFECLIPS
3 жыл бұрын
Go on eBay its Turbo piping
@0303caleb
3 жыл бұрын
Whats the exact size? Thanks
@trentc6069
3 жыл бұрын
I did this and my ears cant take it anymore..
@waverider5751
4 жыл бұрын
Just bought 2 for my skis @ &17.60 each, free shipping, !?¿PRICE DROP¿?!
@brandendwornick9982
4 жыл бұрын
From where
@waverider5751
4 жыл бұрын
Branden Dwornick On ebay... they’re 70 mm 90° polished aluminum elbows for intercooler plumbing. You just have to watch where it’s coming from, the China vendors take up to a month to deliver.
@mikecast1525
5 жыл бұрын
Well done man. Waht a rip off. Its not always u get what u pay for. Someyimes its just the brand that isbthe main cost
@DATURKNGS
5 жыл бұрын
It would be nice if you could show how to take out that ugly box out of the way...lol
@FLORIDALIFECLIPS
5 жыл бұрын
Unfortunately I don't have any more skis to modify remove it as quickly as possible doesn't matter if it breaks or not because you will not be using it again.
@krystofer66
4 жыл бұрын
cut it open whats in side the box.
@nitenite7142
5 жыл бұрын
My friend did this and it don’t sound as nice as the riva they are high in price so I don’t shop from them if I don’t have to but this sound like shit when put next to a Silicone rubber material free flow Exhaust n it don’t have to be from riva remm is an upgrade so u leaving them 2 stock holes is a no no they lick air after a while bc they cant handle all that with out the secondary water box
@208miuwu
4 жыл бұрын
OUCH
@arniesfishing3768
2 жыл бұрын
Yes thats bull crap lol 10% off what a cheap ass holly .!!! Well keep making these videos well done thanks :)
Пікірлер: 146