Really nice, simple instructions, and easy to understand exactly what you did. Thx
@johnnyace46
10 жыл бұрын
I used your vid to put together a Harbor a Freight trailer for my Big Tuna. The Tuna was just to big to get on the top of my Suburban so your build was perfect. Easy launch and recovery! It took me a lot longer to build than it did you but it was pretty easy. Used you tube to learn how to pack the wheel bearings. Even the electrical hookup went in easily too. Grounding the wire to the trailer is key. Again KZitem to the rescue. Thanks Tony.
@VentureTube
10 жыл бұрын
johnnyace46 KZitem is great and you can also ask Uncle Google anything ha! Glad it could help you out johnny. Thanks for watching. Tight lines!
@bakedinspiration
8 жыл бұрын
I can't not thank you enough for this video and inspiration. Picked up my pa 14 today, already had my trailer built and registered, 60 bucks at lowes and about 2 hours (mostly measuring) and I was able to build the set up you're rocking. I didn't grind my washers I found they bent snug once tightened, but a legit replica of your trailer build.Thanks again!
@damionpatterson1507
9 жыл бұрын
Just got my 2015 PA 14 a few days ago, and after watching this video I plan to do the same thing. Great video!!
@VentureTube
9 жыл бұрын
+Damion Patterson Congrats!!
@odavila03
7 жыл бұрын
Damion Patterson i
@duaneafields
8 жыл бұрын
Yesterday, I finished my Kayak/bike trailer based on MOfishyaker and your design here and Uploaded a video of it. Thanks for your video here, I wouldn't have thought of it otherwise. Its gonna make getting to the water a lot easier.
@VentureTube
8 жыл бұрын
Awesome Duane!
@plague6079
10 жыл бұрын
Fantastic!! Thanks for taking the time to show how its done! I was just looking a collapsable & they wanted $1800. It would transport heavier but I don't need that for my Pro 14.
@VentureTube
10 жыл бұрын
Glad this video will help you out! Post some pics on facebook.com/venturetube when you get the project done!
@robertpearl2369
9 жыл бұрын
I made this same trailer for my PA 17T. It worked great. The only difference is I slid the PVC pipe further back and adjusted the front securing post as far forward as possible. It actually rides higher than I originally thought it would.
@VentureTube
9 жыл бұрын
Robert Pearl I love that 17t. good to know that this trailer works with it in case I decide to go that route one day. Thanks for watching!
@jdphizzlelee
9 жыл бұрын
+Robert Pearl So your 17ft boat fits this trailer fine? im thinking of this same build but with a 16ft canoe. whats your suggestion? thank you for answers in advance
@robertpearl2369
9 жыл бұрын
+Jamie Duffey I built this trailer with same material as this video with only minor adjustments. adjustments being I ran the PVC pipe about 20 inches off of the back of the trailer. additionally I pushed the front post as far forward as possible.
@jeffe6176
9 жыл бұрын
Finished my build out. Basically Identical to yours. Spent an extra $20 on bearing buddies and $60 on the spare tire and spare tire mount because I plan to do some long hauls with it. The bearing buddies were upgraded from the dust covers for the same reason. Cutting that superstrut was a bear using an angle grinder with a cutting wheel. Imagine the dremel tool took a long time to get through it. Had one bad tail light but harbor freight said they shipped me a new one already so I'm waiting on it. All in all, good project. Thank you so much for the idea. Also I'm using this to haul my Ocean Kayak trident 13 but it fits very well. I plan to get the PA 14 later and being able to adjust the supports made me feel better knowing it would fit any kayak I want to sit on it. Only thing I may do different once I get the PA is to buy the wing supports that Hobie sells, but I really don't think it is necessary.
@VentureTube
9 жыл бұрын
Jeff Easley Awesome Jeff! Glad it worked out for you. Happy yakin :D
@BobLewen
10 жыл бұрын
About an hour ago, I finished my Harbor Freight trailer with the 3" PVC, for my Pro Angler 12. I built it from your KZitem video... with the Unistrut supports. Thank you for detailing it as you did. (I am a subscriber and appreciate your "work"!) I made some minor changes due to having a PA12, not a PA14. I cut the overall length of the PVC to 9 feet. The PVC overhang from the Unistrut is 15". The distance between the Hobie's front grab handle (resting on the black rubber roller) to the coupler is 33". I also rotated the bracket that holds the roller, so the grab handle rests "in" it. I was concerned about the wiring, so I ran all the wires inside the frame.
@charleslambeth4358
8 жыл бұрын
You should be able to get 13 inch tires and rims at wal-mart that will make it hiway ready for cheap.
@soyakedtx8789
10 жыл бұрын
Awsome setup I was thinking about buying the trailer from harbor freight after watching your video im definitely getting one keep up the good work and the cheap diy's.....stay yaked!!!
@mikeyurganov3595
4 жыл бұрын
Thank you. Exactly what I was looking for my 18 foot cargo canoe with 4hp.. Awesome.
@blesssixone1902
10 жыл бұрын
This is PERFECT...2014 here I come
@coffeedollsvp
4 жыл бұрын
This is nice..easy to build..thanks
@rweakley
3 жыл бұрын
This must be an older model of trailer. After the video I went to Harbor Freight website, but they only have much bigger versions. Oh well it's still better than paying $1500 for a prebuilt kayak trailer. More versatile too. Thanks for the idea! Fellow TX kayak fisherman, BTW.
@VentureTube
3 жыл бұрын
Thanks for watching!
@lawerancelanham
5 жыл бұрын
Gotta do that tomorrow. Picked up one today and brought it home in the plastic on wood bunks. Kept sliding to the side but this'll fix that nonsense 👍
@jamesmurie7944
10 жыл бұрын
Thanks for the trailer idea. I am pumped
@VentureTube
10 жыл бұрын
Ha! Your welcome!
@billcampbell1411
10 жыл бұрын
After seeing your video, I decided to order a trailer today. Thanks for the coupon tip, every little bit helps. I'm down in Puerto Rico so the freight was more than the trailer itself, but there just aren't a lot of options. Some people "jury-rig" jet ski trailers, if you can find one, even then it's about the same money.
@luckycat66
10 жыл бұрын
Great build !! I appreciate the ideas and am re-purposing my old boat trailer now to fit my Slayer Propel 13.2" Kayak ! Look forward to more of your videos !! Also liked your video of your wife capturing that Pit Bull mauling that other dog !! And the one about the Anchor Rope idea !! Good ideas for me
@VentureTube
10 жыл бұрын
Jack Taylor Hi Jack! Glad I could help! That dog came out of nowhere man... Guy that grabbed it was brave.. Anyway, I've changed my anchoring rig and will be posting a video on it soon so stay tuned. I also sell a 8' fiberglass stake out pole that works great for shallow anchoring. There's a video on that coming as well.
@chrisemata18
Жыл бұрын
Kust saw this video..thank you so much!
@VentureTube
Жыл бұрын
You are so welcome!
@robertbroxton8513
10 жыл бұрын
Thanks I have been looking for a way to make a cradle in the bed of my truck. I am gonna use your idea.
@VentureTube
10 жыл бұрын
Hope it works well for ya. Send me a video response when you finish your project. Good luck!
@andywatters5908
8 жыл бұрын
OK will try it, thanks for the great tips.
@KSpestcontrol54
6 жыл бұрын
I found on my outback and PA14 the 3” pvc pipes chaffed the underside of the kayak and had to wrap pipes with carpet to cushion them. I trailer mine all the time, usually 180 miles round trip. Maybe our roads are rougher out here in Kansas.
@robertchadwick1552
3 жыл бұрын
I wish they still had those.
@VentureTube
3 жыл бұрын
Yeah it was a great deal
@kkutube1972
10 жыл бұрын
Awesome, I got the same idea from him and it works great. Your looks great.
@VentureTube
10 жыл бұрын
Thank you sir! Don't forget to sub!
@tailslapexplore6887
8 жыл бұрын
Very Aussie spirit, great job mate.
@rotorheadv8
3 жыл бұрын
Apparently HF doesn’t sell that model trailer anymore. I like the angled front. All the ones they have now are squared.
@jube42
2 жыл бұрын
I am going to invest in one of those trailers. I am going to set mine up where I can still fold it up. I do not want it taking up half of my garage.
@vtxdaryl
Жыл бұрын
Nice trailer.
@VentureTube
Жыл бұрын
Thanks!
@VentureTube
10 жыл бұрын
@SoYaked TX Please subscribe if you haven't already. I need all the support I can get so I can keep these videos coming! Thanks!
@coachwoz
9 жыл бұрын
VentureTube I was wondering as I ordered this trailer on Easter for 25% off and I only have a 10 foot Kayak that I will tow with a Fiat 500. I was thinking it may be possible to not enven use the unistrut and Just mount the Pvc to the Trailer frame . Is that the a reason that you use it as it is used for a 12-14 footer. Or Is it to raise the Kayak up . I plan on cutting the bar to the tounge back as I will just carry my 37 pound Kayak to the water. Thanks for the help
@joebrowell6268
5 жыл бұрын
Great job very nice i have a jet ski trailer looking to put roof rack mounts onto unistrut for 2 yaks. Side by side
@VentureTube
10 жыл бұрын
You really can't beat the trailer for the price, just don't forget to google search for the 20% off coupon. Glad I was able to help you and thanks for watching. C'mon!
@Ramsdl52
8 жыл бұрын
+VentureTube i don't know if they didn't do this before but all of the coupons i find online exclude trailers... www.harborfreight.com/digitalsavings.html
@iceman5815
8 жыл бұрын
Looks great
@pillarsofserpents
9 жыл бұрын
Great video!
@VentureTube
9 жыл бұрын
regression Thanks!
@scottgrzymkowski
8 жыл бұрын
I tried to buy one of those trailers on Labor Day from Harbor Freight. they gave me a big run around. At the end of the day It's around $700 with shipping along with something called a lift fee. Remember the old saying goes, "you get what you pay for" 100% And in this case. If you buy junk, then you work on junk, and you end up with junk.
@keithcarr3048
8 жыл бұрын
Dammit I bot a Malone kayak trailer for $1600 should have looked on youtube first. May still have to adapt this setup since my boat is a solo skiff which is 14.5' long. I just hate finding out I spent 300% more to do what could have been done much cheaper. Oh well.
@dodgethedart
9 жыл бұрын
What size bolts and how long of a bolt did you use for the conduit to unistrut?
@joesmo5143
5 жыл бұрын
Instead of pipe I'm going to try treated 2x4s. They fit almost snug on kayak bottom grooves. I don't see why they wouldn't work. 😜
@DemonicDemolition
5 жыл бұрын
I am hearing these conduits begin to crack and break with time and weight. I would suggest 2 x4 myself. I have not done so but will also use 2x4 maybe with carpet.
@YakMotley
9 жыл бұрын
Great video! You got a new subscriber!
@VentureTube
9 жыл бұрын
Yak Motley Thanks bro!
@MythicGuitarCompany
9 жыл бұрын
the coupon codes usually don't include trailers. sometimes they mess up on the website and you can get the 20% or sometimes if you sweet talk them at the store, they'll give it to you, but, if you look at the ads they send you, it specifically says no trailers, welders, motorcycle lifts, or anything else "high dollar" that you'd ever want 20% off of. :-/ however, that wasn't always the case.
@garyscott982
Жыл бұрын
Hi. Great unit! I cannot find a “ boat trailer” listed on Harbor Freight’s web page. Can you help? Thx.
@VentureTube
Жыл бұрын
I believe its discontinued..... its an old video.
@keepitreelcatfishing5883
Жыл бұрын
What size bolt did you run through the conduit ?
@wingzofsteel
5 жыл бұрын
I wonder how a PA 17 would fit on that trailer? I am about to pull the trigger on one with a Malone Megasport trailer. This would save me money.
@VentureTube
5 жыл бұрын
I think you may have to extend the trailer tongue somewhat but I think it would be perfect otherwise.
@jnichols3
4 жыл бұрын
Want one of these so bad, but HF does not carry them anymore and other distributors jacked the prices up. I want a trailer that will carry 3 or 4 kayaks, but still light enough to be towed by my car (1000 lb. max towing). I have an old 40"x48" HF that am going to modify, but it is going to be a pain in the butt.
@vohntefielding3585
Жыл бұрын
What is the piece with the wheel on it that’s connected to the hitch
@chaddolby8783
Жыл бұрын
How did this trailer hold up for you??
@blaster75torres98
Жыл бұрын
Can’t seem to find trailer online???any help.
@billcampbell1411
10 жыл бұрын
Nice set up! What larger size tires do you think you can up grade to without having to modify the fenders?
@MrPharmer2012
2 жыл бұрын
I don't think they sell anything like this anymore, only the folding trailers
@chuckmartin6049
9 жыл бұрын
Can I use regular 3" PVC-40 pipe for this add on? I have a 2 kayak trailer and want to carry the kayaks upright. i am thinking I can just bolt the PVC to the wood cross members?
@jabrisrucker6541
10 жыл бұрын
Great idea! My trailer will be delivered tomorrow! What size unistrut did you use?
@VentureTube
10 жыл бұрын
Thanks for the sub Jabris! I'm not sure what size the uni-strut is. I purchased it from Lowes and they only had two different kinds, heavy duty and regular. I got the heavy duty. Still works great! Hope this helps!
@vohntefielding3585
Жыл бұрын
Will this fit a 12 foot hoodoo impulse 120 ?
@ezsimpson1
8 жыл бұрын
I just ordered the new PA 14. But I was looking on Harbor freight tools. and they have about three different trailers which one did you get. I don't want to order the wrong one. Thanks Eric
@VentureTube
8 жыл бұрын
+ezsimpson1 I just looked on Harbor freight's website and I don't see it. It was the boat trailer rated at 600 pounds and 14 feet long. Maybe give them a call?
@A1sterbator
10 жыл бұрын
Just ordered the same trailer from HFT. I found the 25% coupon using Google search which took $100 off, $328 shipped easy going. I plan to use your method to build as well but I do have a question about total measurements. What is the total length from tongue to rear lift handle on kayak? I plan to keep the yak on the trailer in my garage and need to know how much space I will need. Thanks! Subscribed
@VentureTube
10 жыл бұрын
As long as you have 17', you should be just fine.
@DaveLife1
10 жыл бұрын
Awesome thanks for posting. Do you have a link to the coupon?
@VentureTube
10 жыл бұрын
Hi David. Just google Harbor Freight coupons. They change all the time. You can use codes from sites like www.retailmenot.com Thanks for watching!
@nashialittle6274
3 жыл бұрын
Where is the coupon been trying to find it
@FatTailFishing
9 жыл бұрын
I went to order the trailer and they wanted to charge me $96.00 shipping not 6 bucks. This is an Internet order only, I tried calling to see if they had it in stock to avoid the 96 bucks but no luck they said internet order only. DAMN!
@VentureTube
9 жыл бұрын
MrDeerhtr Why can't you order from the internet then??
@FatTailFishing
9 жыл бұрын
What I'm saying is how did you get it for $6.00 shipping? They wanna charge me $96 bucks shipping from an Internet order.
@VentureTube
9 жыл бұрын
At the time I ordered, I put in the coupon code and boom it was done. Shipping was $6. Why? Probably because sales weren't as high on that particular trailer as they are now. This video is somewhat old. A lot of people are using these Harbor Freight trailers to tow their kayaks and I guess it's just a matter of supply and demand my friend.
@FatTailFishing
9 жыл бұрын
Damn you lucked out. Any new posts coming on the new mods to the trailer?
@23elbarber
8 жыл бұрын
I was wonder if you could let me know exactly what site you got the coupon from. Thanks
@VentureTube
8 жыл бұрын
Hi Ken. I had google it years back.. I don't think they offer the coupon any longer. I've had several people asking about it so I assume they, Harbor Freight, was tired of losing money on the trailer.
@paulpelmore1045
5 жыл бұрын
I realize that this video is a few years old, but I was just wondering if this same idea will work for a 14 ft. jon boat?
@andreseds8351
9 жыл бұрын
Hey man. Thanks for sharing. I am trying to set up the same trailer but I am having trouble finding the right sized U Bolts. I live around houston? . Can you please tell me where you got those. Thank you
@VentureTube
9 жыл бұрын
Andres Dos Santos You can purchase trailer u bolts at Academy or your local hardware store Lowes Home Depot ect... Thanks for watching!
@scottys2380
8 жыл бұрын
What did you use to drill/cut the bigger top holes on the PVC so the washer would fit through it. I bought everything needed to do my trailer and the washers I got ar just shy of 1 1/2". I tried using a wood bit but didn't work....Nice job on the trailer and I enjoy watching your videos.
@VentureTube
8 жыл бұрын
Hi Scott. I used a hole saw drill bit.
@luckycat66
10 жыл бұрын
I've got almost all of the materials to attempt a similar build on my used johnboat trailer. I couldn't see clear enough on your video what type of screws or bolts you used to go through the PVC and into the flat nuts above the springs ? When I bought my Unistrut , it only came with the spring and the flat nuts ....... No screws or bolts ? I couldn't tell if the hole you drilled into the top of the PVC was to get a long ratchet down ( if you used a bolt) or was just large enough to work a long screwdriver to a screw top ??? Can you provide some light on this Please ....... THANKS
@andywatters5908
8 жыл бұрын
Great video,dose the pic pipe have to be 3" I have just got 4" pipe to fit a outback I am getting shortly, just wondering will it be too big to slot in the bottom of the kayak.
@VentureTube
8 жыл бұрын
+ANDY WATTERS I have never seen it done with 4" but I'm sure it will work just fine.
@unome
10 жыл бұрын
nice!!!
@VentureTube
10 жыл бұрын
Indeed! Subscribe mang! ha
@scottgrzymkowski
8 жыл бұрын
by the way they do not accept the 20% or the 25% online coupon for trailers anymore trailers anymore.
@luckycat66
8 жыл бұрын
Can you elaborate on the spring nuts and bolts used ? Stainless steel spring nuts ?? Galvanized ?
@VentureTube
8 жыл бұрын
It's been awhile but I do know that the spring nuts weren't galvanized. They were in the same section as the Uni-Strut at Lowes. I sprayed both the Uni-Strut and spring nuts with galvanized spray paint.
@letsgetitnow22223
9 жыл бұрын
nice rig bro!! whats the length on your conduit? 2015 hobie PA 14 is DA BOMB!!
i want to do the same for just BIKES and KAYAK but i can't do any of this myself.. can you help? or suggest someone in florida? any used kayaks? jersey joel fort myers FL thanks for posting
@jackofalldenton4347
6 жыл бұрын
Got on harborfreight and cant find this trailer.
@VentureTube
6 жыл бұрын
This video is very old.
@macgyverlee5782
8 жыл бұрын
Hi venture tube I love this video!! One question for you: wether if it's 2x4 or conduit if it makes contact with the scupper hole would that be bad for it in the long run? Or should I try avoid setting the kayak on the scupper?
@VentureTube
8 жыл бұрын
Yes I would avoid hitting the scuppers if possible. It's one of the weakest points on the yak. That's why I used the 3" conduit. Lots of support but nothing directly on the scuppers.
@macgyverlee5782
8 жыл бұрын
+VentureTube ok just wondering because I have the 2x4 full length on my kayak but it blocks the scupper hole.
@macgyverlee5782
8 жыл бұрын
+VentureTube do u think if it touches a little it will be ok? Does your fully miss the scupper
@andrewlouderback
8 жыл бұрын
How did you go about curving those flat washers to fit the conduit? Like the idea I'm using it on my own trailer
@VentureTube
8 жыл бұрын
+andrew louderback hammer and a round metal pole
@davebradley2532
10 жыл бұрын
Did you pick the rest of the build materials up at lowes or HD or did you have to go to auto store for brackets? I am doing this build for my yak as well.
@jackmcinerney8601
2 жыл бұрын
Any problem with loading/unloading in saltwater? Any corrosion of the metals??
@VentureTube
Жыл бұрын
No but I didn't take her in the salt very often
@plague6079
10 жыл бұрын
By the way I subscribed!
@VentureTube
10 жыл бұрын
Thanks for the sub Bob!
@peternohlmans4588
4 жыл бұрын
hi Tony can you give me some measure ments im after the center hole spaceing for the pvc pipe bolts please
@bryantucker97
10 жыл бұрын
does the PA 14' fit? How much of the boat hangs off the back of the trailer? Just to where the conduit overhangs? Thanks.
@VentureTube
10 жыл бұрын
Yes it fits like it was made for it both in length and width. The pro angler hangs approximately 20" off of the conduit but the center of the kayak sits about a 18" in front of the axle. Works great launching and towing. Thanks for watching!
@letsgetitnow22223
9 жыл бұрын
Ever put bigger tires on that thing yet?
@luisserrano6508
7 жыл бұрын
What's the length outside to outside of the fenders? I been trying to find online but couldn't find the spec on this trailer
@VentureTube
7 жыл бұрын
I sold that trailer a while back.. I can't give you an exact measurement but I'd say it probably around 54" wide approximately
@DavidAguilar772
8 жыл бұрын
or stainless steel?
@sinclairal
9 жыл бұрын
Did you use square U-bolts or normal U shape ones to mount the unistrut to the frame? Also which size U-bolt did you go with? I am building this exact same setup now. Just got my trailer built. Thanks for any help,
@VentureTube
9 жыл бұрын
COMETSHIP I used the round ones because they were cheaper. If I were you, I'd go with the square ones. They will make a tighter connection. I believe at a minumum they have to be 3.5 inches tall by 2.5 inches wide.
@theoldscout3478
4 жыл бұрын
They no longer sell boat trailers (2020).
@allentig
7 жыл бұрын
please tell me, that you did not leave the grease from the factory, in the hubs? that is shipping grease, it must be replaced.
@VentureTube
7 жыл бұрын
Actually I did. Guess I got lucky. Never had any problems. The grease wasn't just on the outside of the bearing. It looked like it had been properly greased by pumping. They wouldn't do that with shipping grease...at least I don't think they would.
@allentig
7 жыл бұрын
its right there in the instructions...... they use a clearish almost Vaseline looking shipping grease
@RedfishInc
4 жыл бұрын
Too bad harbor freight quit selling these.
@Dtgoynes
8 жыл бұрын
How far apart are the 2 sections of unistrut? I'm trying to fabricate my Malone Microsport trailer TIA
@VentureTube
8 жыл бұрын
+Dtgoynes Mine are approximately 7' apart.
@Dtgoynes
8 жыл бұрын
+VentureTube thanks bud
@JR-lu6pq
7 жыл бұрын
@dtgoynes Did you ever fabricate this on your Malone trailers?
@jacobstacho
7 жыл бұрын
Tony, do you think there's enough space for 2x PA 14's?
@VentureTube
7 жыл бұрын
If you vertically stacked them, yes...side by side, no sir
@jacobstacho
7 жыл бұрын
Thanks man, your videos led me to a final decision of getting PA14. I have a utility 6x10 trailer that I will build a platform on top of it to accommodate 2 yaks. Do you have an instagram account?
@VentureTube
7 жыл бұрын
I do although i'm not on it much. Look me up man.
@earlbroussardjr
5 жыл бұрын
How long did you cut the pipes? I have a PA 12 I know it will be shorter. Thanks in advance.
@jackmorrison4382
8 жыл бұрын
Could you get 2 native slayers (32" wide each ) on this trailer?
@VentureTube
8 жыл бұрын
+Everything Outdoors I'll take some measurements today and let you know.
@br7874884
3 жыл бұрын
Did the wheel bearings last long on it?
@VentureTube
3 жыл бұрын
I no longer own this trailer but I never had any issues with the bearings.
@uncno
6 жыл бұрын
How did you screw in those nuts inside the unistrut bar?
@VentureTube
6 жыл бұрын
Those are designed for unistrut. You'll see them by the unistrut at your hardware store.
@uncno
6 жыл бұрын
VentureTube sorry if I'm not understanding but what are "those" that you are referring to that will be able to screw in the nuts
@uncno
6 жыл бұрын
VentureTube hex nut driver?
@VentureTube
6 жыл бұрын
DubFishin yes a socket driver will do the trick
@stevenbelanger871
7 жыл бұрын
Without a plywood floor on the trailer, how does the kayak do with road grime and dirt and such??
@VentureTube
7 жыл бұрын
Never had road grime issues. Plus, I pedal so fast that nothing could hold on to the bottom of my yak haha!!
@olevendborglassen1027
6 жыл бұрын
cable ties.👍🏻😊
@crash0466
10 жыл бұрын
Have you put bigger tires on the trailer yet? I was thinkin of gettin it for my yak but I travel a long ways some time and the small tire just wont cut it.
@VentureTube
10 жыл бұрын
No I haven't yet.. I've made several 3 hr trips with the small ones at 70 mph and so far so good. On the tire, it says its highway rated but I would still like to have some larger ones...just not in the budget yet.. Thanks for watching!
@jacksoninman9987
6 жыл бұрын
I can’t find the 600 pound trailer
@SavageAmerican95
8 жыл бұрын
which trailer is this from Harbor Freight?
@VentureTube
8 жыл бұрын
The 14ft jon boat trailer
@ratoneJR
4 жыл бұрын
Still use it? Still like it?
@jesmineryckman3157
8 жыл бұрын
but is it saltwater compatible?
@VentureTube
8 жыл бұрын
No it doesn't agree with the salt haha
@andersonpotter2261
10 жыл бұрын
How do you strap it down
@VentureTube
10 жыл бұрын
Anderson Potter I just use two ratchet style straps. One of the front grab bar, and another across the stern of the kayak.
@cxb1588
9 жыл бұрын
What do you have to register for?
@VentureTube
9 жыл бұрын
Thatkidwhofishes 1 Trailers must be registered just like a car if it's going to be pulled down the road. It's the law. Thanks for watching bud!
@kenthonea2818
9 жыл бұрын
VentureTube dont have to register trailers here in Charleston SC
@brandonstiewig4411
4 жыл бұрын
What size is that trailer?
@fsusteve1
10 жыл бұрын
I have a Jon boat trailer that I'm about to convert like this, similar to MOfishyaker's, do you have any issue with that 3" sch 40 sagging at all? Just wondering if I should run one more section of uni-strut.
@VentureTube
10 жыл бұрын
I wouldn't be concerned with it sagging. That stuff is quite rigid. You would probably have to load your boat up with a lot of weight to make it sag at all. Even if it does sag slightly, it will conform to the hull of your yak, but no worries, that conduit is strong. Good luck with the build!
@fsusteve1
10 жыл бұрын
Trailer is completed, turned out pretty nice, thanks for the idea!
@JasonSmith-hl4ot
4 жыл бұрын
I can use that for a Trump car parade!!!! Trump 2020!!!!! Real men love Jesus!
Пікірлер: 190