"bestarc 145" welder: amzn.to/4eUrUrS EDIT- the exact machine in this video is currently out of stock. The link above takes you to their available machines.
@johnvansloun7443
2 ай бұрын
If you buy the one in the link you won't get the one in the video. The one you have linked is gasless. I think there are a few models of this welder FYI. I'd love to find the one in the video.
@6061
2 ай бұрын
@@johnvansloun7443 Thank you for bringing that to my attention. They pulled a fast one and changed the link, or ran out of stock on that specific machine. I edited the pinned comment for now.
@Jimmeh_B
2 ай бұрын
Hands down, the BEST unboxing I've ever seen. Thank you!
@tipkoala6171
2 ай бұрын
1:22 if youre a little paranoic on wasting wire you can simply roll back the wire drum to avoid cutting those extra inches...😂
@paulkurilecz4209
Ай бұрын
My concerns about lower cost welders are durability, customer service, and duty cycles. Beyond that, it looks like they do make a good starting point for the person who is not welding day in and day out. I don't like using the term "hobby welder" as it seems to imply a lack of quality and expertise. I am of the opinion that the person who is welding on the weekends on personal projects needs to be able to produce just as good of a weld as someone who makes their living from welding.
@KZ-yy9pm
2 ай бұрын
This channel “gonna get lit” now that the Chinese factories are on to him.
@tedsaylor6016
2 ай бұрын
The ditty I heard was "If it makes Slag, then you should Drag" (just talking about metal welding here)
@kontruksi317
2 ай бұрын
good welding 👍 suitable for reference for beginners like me 👍 thank you
@ajsorensen2585
2 ай бұрын
wow that is a solid deal and nice mig welds! If you can make nice TIG welds you can MIG well too : ) I might get one of these just to have a more portable one, my miller doesn't work on 120V, another cool thing you might like is Blue Demon makes stainless flux core wire, I used it once to fix stainless marine on site and it works well! Definitely check it out 😎
@jonmeray713
2 ай бұрын
Im running my mig180 with .030 flux on 110. She loves a mig like stickout
@metalheartmachine
2 ай бұрын
Amazing how small they have become. My old transformer 'portable' 110 mig is an arm breaking almost 50 pounds.
@rjdorman6580
2 ай бұрын
I’ve got a best arc dual voltage plasma that I bought on a whim from a damaged freight store, it is pretty damn good for the $100ish dollars that I’m into it. I can’t speak to the longevity but it cuts great. Note: I have only ever ran it on 220.
@Mudweizer
2 ай бұрын
What a price, nice review 👍
@rockerbuttons25
2 ай бұрын
Looks like the one in the video isn't available. The link takes you to the 110V gasless only version.
@MyBsquared
2 ай бұрын
👍
@steveman1982
2 ай бұрын
These welds look nicer than what I produce with my ~130 euro fluxcore MIG welder from parkside... May very well be due to operator skill though :D
@civichbc
2 ай бұрын
I was looking at their plasma cutter.
@blalor76
2 ай бұрын
Great review and a nice little welder. No TIG gun, so do you think it’s worth adding the accessories to equip it for a newbie to TIG?
@nathkrupa3463
2 ай бұрын
Good video 😊
@workshop593
2 ай бұрын
👍
@eightsecet
2 ай бұрын
Correct me if I'm wrong but didn't the menu say it does tig also?
@johnhagerty4468
2 ай бұрын
How do you get your welds to lay flat mine are always humped up I am using a Lincoln 140 c welder with.030 steel wire with 75/25 gas
@6061
2 ай бұрын
How thick of material are you welding, and what type of weld (butt,lap,T)?
@johnhagerty4468
2 ай бұрын
@@6061 14 to 18 gauge butt , T and just making repairs Thanks
@chucknorris2952
2 ай бұрын
Too cold?
@lawrenceveinotte
2 ай бұрын
How did you hook up the gas?
@jameskauffman8405
2 ай бұрын
Couldn't believe the price.
@chucknorris2952
2 ай бұрын
💯
@neilheriot2361
2 ай бұрын
✌
@charliehuntsman9827
2 ай бұрын
😂😂😂 tu da ( Peter Griffin )
@tipkoala6171
2 ай бұрын
BTW, A little tip when welding either FCAW or GMAW: ALWAYS PUSH. If the wire does leave slag is less important because the bead is protected by the slag itself but when welding round pieces as boilers p ex you will have porosity problems if pulling. Pushing also leaves less amount of heat. Thanks for your videos!
@6061
2 ай бұрын
Never say "always". More often than not, there are exceptions to all these made up welding "rules". What if you want more amount of heat? Or what if you are welding downhill? You typically don't want to push a weld downhill... I'll make a video on this sometime later.
@leetsauce5727
2 ай бұрын
So much for that whole "Slag = drag" eh?
@tipkoala6171
2 ай бұрын
@@6061 youre right, in that scenarios that you are mentioning is better to pull. I should have said "push as long as you can as long as there are not restrictions" 😉🙏
@andreyka64
2 ай бұрын
there is no “always” rule. Proven time and time again everything is situational.
@74willy81
2 ай бұрын
@@6061 Most of the time the old adage of "if it leaves slag....drag" holds true in order to circumvent slag inclusions.
@jamesward5721
2 ай бұрын
Doesn't have arc-force adjustment so it goes onto my "Just more crap" list when it comes to flux-core. Prolly fine for other stuff, but it won't run flux-core well, simple as.
Пікірлер: 43