Great demo guys! Never seen that method. Thank you for the play by play
@FlightReviewz
5 жыл бұрын
Thank you Gmoney. Glad to hear you learned something new.
@Vdubin64bug
Жыл бұрын
Awesome
@FlightReviewz
Жыл бұрын
Glad you enjoyed it!
@e-rj8984
Жыл бұрын
Thanks so much for worthful info/instructions 🌷👍
@FlightReviewz
Жыл бұрын
You are so welcome!
@dankloker7041
3 жыл бұрын
Great video....always wondered how they did checker boards..now I know. Can’t wait to try it
@FlightReviewz
3 жыл бұрын
Glad it was helpful!
@1stmrcapncaveman
5 жыл бұрын
Came out pretty good, I would most certainly want to put some kind of clear coat over it to ensure it does not peel off.
@FlightReviewz
5 жыл бұрын
Thank you Jerry. If you take your time ironing it down and use the Monokote trim solvent, clear coat is not necessary. We have planes that are 8+ years old that still look great.
@P61guy61
2 жыл бұрын
Excellent. Thank you for posting
@FlightReviewz
2 жыл бұрын
Our pleasure. Glad you enjoyed it!!
@daveschierberl229
5 жыл бұрын
Nice video guys it’s always good to see how other people do it
@FlightReviewz
5 жыл бұрын
Thank you Dave. We are glad you enjoyed the video!
@stevebarrow3042
3 жыл бұрын
Thanks gents great tutorial
@FlightReviewz
3 жыл бұрын
Glad you enjoyed it
@francescoc.6732
2 жыл бұрын
Perfect !!!
@thermalascension
Жыл бұрын
Cool 👍 thanks
@FlightReviewz
Жыл бұрын
No problem 👍
@bigtiny3857
3 жыл бұрын
Wow. Great tips.
@FlightReviewz
3 жыл бұрын
Thank you, Big Tiny! Glad you enjoyed the video.
@towitowi1
Жыл бұрын
Super nauka😮
@FlightReviewz
11 ай бұрын
Glad you liked the video!
@ryanlock4916
5 жыл бұрын
Excellent video boys!
@FlightReviewz
5 жыл бұрын
Thank you Ryan!!
@islandrc-duke1972
5 жыл бұрын
great video,thanks for the tips.
@FlightReviewz
5 жыл бұрын
Thank you very much. Really glad you enjoyed it!
@orellanajuan9431
4 жыл бұрын
About 15 min is good. I have 3 kids so it may already get interrupted. Great content though. Besides. Smaller “concentrated/specific” videos are great. I learned a lot in just a few minutes even though I’ve been doing this for 30 years. 👍
@FlightReviewz
4 жыл бұрын
Thanks for the feedback. Glad you found the video useful!!
@donaldvanhook924
5 жыл бұрын
Great video! Keep it up!
@FlightReviewz
5 жыл бұрын
Thank you Don!!
@Dutcharmytent
4 жыл бұрын
Have subscribed, for the humour. Thumbs up.
@FlightReviewz
4 жыл бұрын
Thank you, Mr Strong. Happy to have you here!!
@leeh9931
3 жыл бұрын
Great Video guys, Please do a video for Doing the Same with Ultracote/Oracover? Ie Applying Multilayers with no bubbles? This would be fantastic!
@FlightReviewz
3 жыл бұрын
Thank you, Lee. We will see what we can do. Ultracote is much more difficult to do this with, but we will try to come up with some tips. BTW: we feel the end may be near for Monokote so we have some plans for some videos with new ideas on applying a trim scheme.
You should use that quirky ASOTV tool Santa baby got you. Or... cricut some stencils!
@FlightReviewz
5 жыл бұрын
Stay tuned LaVista. We are working up to that. We may even have to bring in a subject matter expert!!
@TheZpilot55
3 жыл бұрын
Tks for sharing Nice tips but I didn t get the clear plastic brand. Can I use any generic food wrapping plastc? TIA
@FlightReviewz
2 жыл бұрын
Don't think normal wrap will work. This was filmed and tested using Glad Press and Seal.
@reezalgunjai
4 жыл бұрын
this is very good guys. I have one question, are there any other options besides using press n seal? Bcoz i can't find this in my country. Appreciate your response. Thanks.
@FlightReviewz
4 жыл бұрын
you can try masking tape, just apply it to your pants so it is not so sticky.
@reezalgunjai
4 жыл бұрын
@@FlightReviewz aaaahahhh! Will give it a try..thanks
@rcnatec64
3 жыл бұрын
I suppose if I wanted to do a wavy checkerboard, that would work to, may be not perfectly symmetrical on both sides.
@FlightReviewz
2 жыл бұрын
You are correct. A wavy flag shouldn't be symmetrical anyway in our opinion...
@garymurphy5133
3 жыл бұрын
Is that not a waste? can the pieces you discard not be used for the other side?
@FlightReviewz
3 жыл бұрын
Yes Gary, you can use them for the other side, the only issue will be getting them to line up exactly. I have used them for the underside of the wing and for the stabilizer, where if the alignment is off it won't be so noticeable.
@JBenson76
3 жыл бұрын
To add to the previous reply. Another thing to consider is that you would generally mirror the pattern on the other side. There is always some waste when it comes to covering but I feel the final product is well worth it!
@monkfry
4 жыл бұрын
The best kind of nerds. Thx for the info, good one!!
@FlightReviewz
3 жыл бұрын
Thank you, monkfry!! Glad you enjoyed it!
@swansoninspections1845
5 жыл бұрын
King me!
@FlightReviewz
5 жыл бұрын
Well, technically you could make a pretty sweet checker board board with this. LOL. Thanks Swanson Inspections.
@swansoninspections1845
5 жыл бұрын
FlightReviewz if I was high brow, I’d have said Checkmate!
@shop970
2 жыл бұрын
Buy it ready made. Do some tesearch.
@FlightReviewz
2 жыл бұрын
Tesearch?
@shop970
2 жыл бұрын
@@FlightReviewz research. Take your time. Do it correctly. Easily Go & purchase it!
Пікірлер: 57